Renovation/upgradation of rooms, toilets, drain repair and raising the boundary

Amount

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25mm Thick.M&L

Demolition Brickwork or stone/boulder masonry buit in cement mortar

Virified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to match.M&L

Providing and fixing factory made uPVC white colour fixed window/partition made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners Area exceeding 2.00 sqm Each. S&F

Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated).S&F

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

Taking down cement plaster including raking out joint , hacking for key , scrubbing down with water etc

Taking up or downs steel tubing and connections, including cleaning for re-fixing or removal to store, Bore of pipe in 40 or 25 mm

Rendering 12mm plaster in 1:4 Cement mortar on fair face of brick work or concrete surface M&L complete. M&L

Brick work with sub class B straight orcurved on plan to any radius in 1:6 Mix M&L Complete

Cement concrete in foundations, filling and mass concrete type B2 1:2:4(40mm graded aggregate).M&L

Formwork to flat sides of concrete in rough finished foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litreand UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 litre/10 sqmover and including primingcoat of exterior primer applied @ 0.90 litre/10 sqm.Make - Asian, Berger, Nerolac.

Supply and fixing factory made uPVC white colour two track two panels sliding glazed window up to 1.5 m height made of (small series ) frame 52x44mm & sash 32x60mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension ( Area of window up to 1.75 sqm ) comprising of uPVC multi chamfered frame with inbuilt roller track and sash extruded profile duly reinforced with 1.6±0.2mm thick galvanized mild steel section made from roll forming process of required length ( Shape and size according to uPVC profile ) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks , EPDM gasket, wool pile , zinc alloy ( White powder coated ) touch locks with hook , zinc alloy body with singlenylon rollers ( Weight bearing capacity to be 40 kg G.I fastners 100x8mm size for fixing frame to finished wall and necessary stainless steel screw etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners , including drilling of holes for fixing hardware's and draining of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , complete all as specified and directed by engineer in charge ( Glass shall be paid separately) .

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

Cutting holes in brick walls exc. Half brick but n.exc. One brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

M&L Frosted Sheet glass , ordinary quality and glazing n.exe 0.5 sqm in each pane 4.8mm thick .

M&L Frosted Sheet glass , ordinary quality and glazing exe 0.5 sqm in each pane 4.8mm thick .

M&L Sheet glass , ordinary quality and glazing exe 0.5 sqm in each pane 4.8mm thick .

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.S&F

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.S&F

Anodised aluminium door shutters Powder coated, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.S&F

Double action floor springhydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Mild steel Mortice lock, vertical type in two levers, size 75mm.S&F

Prepairation of new steel surfaces and painting of synthetic enamel two coat with red oxide zinc chrome on steel surfaces with of any description, over 10 cm in width or girth, not otherwise described.Asian, Berger, Nerolac or equivalent

Preparation of old surfaces of wall and apply two coats of distemper oil emulsiontion.M&L .Make: Asian, Berger, Nerolac or equivalent

Screed bed or bedding layer of cement 1:4 mortar 15 mm thick for laying floor finishes.M&L

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) but in wire entanglements aprons, barriers, gates,etc. S&F

S&F GI concertina coil 600mm dia (50 turn/coil) expendable 6 to 08 mtr. Fixed on angle iron frame over brick wall/angle post all as specified as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil & refilling of earth as required.

Mild steel TMT bars 05 mm to 10 mm dia and over ,cut to length , bent to shape required in stirrups, spacers and binders, including cranking , bending spirally or hooping and binding with 0.9mm dia wire annealed.S&F

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, having 110 mm bore. S&F.

PVC (SWR) bends in any radius for pvc pipe having bore 110 mm S&F.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore S&F

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 100mm.M&L

S&F 110 mm bore PVC(SWR) junction single, (Single T ) equal or unequal.

S&F. Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and dixed in position complete in all respect as specified.

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT Pillar cock, 32 mm PTMT waste coupling of standard pattren of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm pillar cock. with providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.Make: Hindware,Cera,Parryware or equivalent

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 6 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.Make- Hindware, Cera,Parryware or equivalent.

vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe).S&F

PVC connectiona 15 mm size with PTMT nuts of length 450 mm. S&F

PVC valveless, syphonic action type flushing cistern, 10 Ltr. Capacity low level, white with inlet, ball valve, float and handle including brackets.S&F

Butt hinges, medium weight, cold rolled mild steel, and fixed. Size 100mm. S&F

Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, Size 150mm.S&F

Mild steel pressed handles, oval type, stove enamelled black 125mm.S&F

Providing and fixing PVC flexible waste pipe for sink or washbasin including PVC waste fitting complete 32 mm. Dia.

Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms).S&F

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardanand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Providing and fixing factory made single extruded 30mm thick WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm. In floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Make- Johnson tiles, kajaria, nitco.

Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with joint free

White colour 4 layer Rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part I, Make: Sintex / Vectus /Plasto or equilent S&F.

Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floor bore of pipe 15mm

Tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floor bore of pipe 20mm

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe).S&F

Push tap suitable for urinals any colourhigh pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-50gms) dia of pipe 15mm.S&F

Waste coupling suitable for urinals of PTMT(half or full threaded) .(Minimum weight 32mm 45gms

Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm and fixed. (Minimum weight15mm-90gms/20mm 125gms).S&F

Removing of building material etc. to a distance 1.km including loading , unloading and stacking at the destination .

M&L of point wiring of One light point or one fan point controlled by one switch with 1.5 sq mm single core FRLS PVC insulated unsheathed Cable, multi stranded copper conductor,(Make-Kalinga/Plaza/Anchor /Havells only, IS: 694-1992 marked).connected with suitable size of copper lugs-ring tong or bottle type end connector and drawn through and including non rigid PVC concealed conduit 25 mm dia or higher complete all PVC conduit accessories such as socket, elbow, junction box bell mouth reducer bend and flexible conduit fittings etc of PCG/Plaza/Anchor/Vimco/Polycab make, and pipe hooks/saddles, ISI marked including 1.0sq mm multi stranded copper conductor PVC insulated green in color of Kalinga/ Plaza/ Anchor/ Havells make and IS: 694-1992 marked only) as continuous earth conductor connect to common earth and earth dolly with all accessories complete all as specified and directed.

M&L cocealed wiring one three pin socket outlet 15 amps. Independent wiring with stranded copper cond. PVC sheathed Cables in PVC conduit with cables 2.5 sq. mm size. Make- Pipe- Kalinga / Polycab /Plaza only. Make Wire-Finolex /Havells / RR only. (Note: The rate include any length of wire required from DB to switch board and light point,Socket point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L cocealed wiring one three pin socket outlet 15 amps. Independent wiring with stranded copper cond. PVC sheathed Cables in PVC conduit with cables 4 sq. mm size. Make- Pipe- Kalinga / Polycab /Plaza only. Make Wire-Finolex /Havells / RR only. (Note: The rate include any length of wire required from DB to switch board and light point,Socket point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L one three pin socket outlet 5 amps on the same board with other switches, with stranded copper cond. PVC sheathed cables 1.5 sq. mm size. Make- Wire-Finolex /Anchor / RR only. Make- Pipe- Kalinga / Polycab / Plaza only.(Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L of One 3 pin socket outlet, 5amps, independent, with stranded copper cond. PVC sheathed cables 1.5 sq. Make- Wire-Finolex /Anchor / RR only. Make- Pipe- Kalinga / Polycab / Plaza only.(Note: The rate include any length of wire required from DB to switch socket board)

S&F wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surfase /recessed as required 2X6sq.mm+1x4.0 sq.mm earth wire in PVC conduit. Make- Pipe- Kalinga / Polycab / Plaza only. Make Wire-Havells /Polycab /RR.

S&F wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surfase /recessed as required 4X10sq.mm+2x6.0 sq.mm earth wire in PVC conduit. Make- Pipe- Kalinga / Polycab / Plaza only. Make Wire-Havells /Polycab /RR.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc 10 cm girth

M&L of Modular Sockets, 6A - 2/3 pin combined 2 module Make: Anchor/ Havells/Legrand

M&L of Modular switches 1 way 6A,1module. Make:Anchor/ Havells/ Legrand

M&L Modular Sockets, 6A/16 A - 2/3 pin combined 2module. Make: Anchor/ Havells/Legrand

M&L of Modular switches 1 way 16A, 1module. Make: Anchor/ Havells/ Legrand

M&L Modular step Fan Regulator 120 watt 2 module Make: Havells/ Legrand/ Anchor

M&L Modular metal Flush Box 6 module Make: Anchor/Havells/Legrand

M&L of Madular White cover plate with frame, 3 module. Make: Anchor/ Havells/ Legrand

Supply and fixing round shape 12 watt 220 volts ACrecessed/Surface (as per EIC directions) type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling includingconnecting up with three core flexible copper conductor cable of suitable size complete. Make: Havells/ Crompton/ Philips.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers 5 star rating energy efficient (sample may got approved) Make-Bajaj, havells, crompton.

M&L Sheet Metal Enclosure For DBs SPN 08Way 240 V Double Door Make Havells/Legrand/Polycab

S&F Sheet Metal Enclosure For DBs TPN 4Way 415 V Double Door Make Havells/Legrand/Polycab

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following polesand current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 32 AMP Make Havells/Legrand/Poly cab.

S&F 240 V 10 KA B curve MCB single pole 6 to 32 A in MCB DB complete with testing Make Havells/Legrand/Poly cab

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TPN Four Pole 40 to 100 AmpereMake Havells/ Legrand/ Poly cab

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitxure and fitting such as switches, ceiling roses, pendent, regulator, sockets, light fitting etc. to be measured separately, removing materials to store for keeping in safe custody or for re Use,it also includes re-connection of the old fan which are hanging on their old position and removal of old DB's,MCBs and other dismentalling as per site requirement.and making good disturbed surfases of walls,floors,etc.( removal of old Sheet metal enclosures of main DBs are also include.)

M& L Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

M&L Modular switch 2 way 6A, 1 module, Make: Anchor/ Havells/ Legrand

M&L of Madular White cover plate with frame, 12 module. Make: Anchor/ Havells/ Legrand

M&L of Modular Metal Flush Box 12 module Make:Anchor/Havells / Legrands

M&L of telephone point wiring with 2 pair cable through concealed PVC conduit of appropriate size complete with socket outlet ,testing and commissioning (any length reqd.to the point is included inside room)

S&F of cable TV RG-6 networking wiring through concealed PVC conduite of appropriate size with socket outlet for TV connection (Any length required to the point wiring is included inside room)

M/S P K ASSOCIATES (BID ID -931165)

SUKHMAL CHAND JAIN (BID ID -932021)