SPECIAL REPAIRS TO BLDG P-532 AT NJ NAIR ENCLAVE AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM

Amount

B/R Works Demolition of cement concrete including tiles mortar of any description and in any position etc complete all as specified and as directed .

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), depositing debris out side MD land complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregate as in 25mm thick levelling concrete on roof with proper slope, finished even and fair etc complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 Sqm and not exceeding 0.38 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:4 complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18Sqm and not exceeding 0.38 sqm, as in vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat in cement mortar 1:3 etc complete all as specified and as directed.

Material and labour for non skid/ matt finish coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 Sqm and not exceeding 0.11 sqm, as in floors/ steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:4 etc complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 8-10mm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar as in floors, aprons etc complete all as specified and as directed.

Material and labour for granite slab of any type, 20mm thick, machine cut in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in window cill, slab, in steps, jambs, pillars, etc, including cutting, polishing of stone slabs etc., complete all as specified and as directed.

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in 75mm thick as in plinth protection and similar work etc, finished even and smooth with using extra cement complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in 100mm thick sub base of floor etc, finished fair and even etc complete all as specified and as directed.

Material and labour for chequered cement concrete colour tiles 30 cm x 30 cm x 25 mm/ 20 cm x 20 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 15 mm thick screed bed in cement mortar 1:4 etc complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed.

Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed.

Taking down existing water proofing treatment on the vertical surfaces like parapet & chajja etc including cleaning with wire brush etc., and removing debris outside MD land complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick masonry surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and labour for rendering 5mm thick on concrete surfaces of ceiling, chajja in cement mortar 1:3 and making the surfaces with even and smooth finishing without using extra cement etc complete all as specified and as directed.

Material and labour for 15mm thick rendering in two coats (10mm + 5mm) 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturers instruction on brick/ block masonry surfaces, finished even and fair etc complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only water proofing compound complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint etc complete all as specified and as directed.

Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint etc complete all as specified and as directed.

Material and labour for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Material and labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 etc complete all as specified and as directed.

Demolition of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including breaking and removing of existing roof treatment etc complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 , type B-0, with using 12.5 mm graded stone aggregate as in 40 mm thick floor, finished even and fair etc complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar 1:3 mixed mixed with water proofing compound as per manufacturers instruction on roof surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Material and labour for water proofing treatment to RCC roof slab by applying oil bound bitumen primer @ 0.27 litre/Sqm and lay APP modified pre fabricated five layer membrane of 4 mm thick and weight not less than 4.50 kg per Sqm reinforced with non woven polyester matt reinforcement weighing not less than 160gm/Sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/cm, tearing strength of 180, a static puncture resistance of 180, keeping minimum 10 cm side overlap and 15 cm end lap and apply by torch application over a coat of blown grade hot bitumen grade VG-10 conforming to IS 702 heated to a working temperature of 180 degree centigrade and applied a tack coat of industrial bitumen 85/25 @1.2 kg/sqm including cleaning surfaces. Membrane shall be filled laid including minimum and painting over APP Membrane sheet with solar reflective aluminium bituminous paint @ 0.10 Litre/Sqm etc complete all as specified and as directed.

Note: (i) 10 Years guarantee certificate to be submitted by the contractor. (ii) Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialised agency/ applicator which will further have to do rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.

Disconnecting existing water tanks not exceeding 500 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and cleaning, removing scale & dirt etc from tank and mouth of circulating pipes etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exceeding 10 cm girth in brick wall etc complete all as specified and as directed.

Supply and fix 20mm bore unplasticised PVC (UPVC) pipes, of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings and taking down existing 15mm dia GI pipes etc complete all as specified and as directed.

Supply and fix 25mm bore unplasticised PVC (UPVC) pipes, of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings and taking down existing 20mm dia GI pipes etc complete all as specified and as directed.

Supply and fix 25mm dia ball brass valves, with crutch or butter fly handle, high pressure, with polythene float and flynut complete, screwed for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix 25mm outer dia CPVC tank adaptor all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided etc and removal of debris outside MD land including site clearance complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4, type B-1 using 20mm graded aggregate as in slab supported on walls/ beams etc complete all as specified and as directed. Note: Reinforcement and form work shall be measured and paid separately.

Material and labour for form work to soffits of suspended slabs such as roof slab and similar work etc for even and fair finish etc complete all as specified and as directed.

Material and labour for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Removing loose and broken concrete/ masonry surface by chiselling/ mechanically etc from the roof slab, column, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and removing to debris 50 Mtr from site all as specified and as directed by Engineer-in-Charge.

Material and labour for applying IPH RB -107 polymer based rust-remover (pH value –12 ) and applying IPH RB -167 Polymer based rust preventive (pH value-9) to all exposed reinforced bars all as specified and as directed by Engineer-in-Charge.

Material and labour for applying one coat of epoxy bonding coat as per manufacture's instruction to bind with old concrete / wall surfaces of soffit of slab, column, beam and similar structural members for new cement surface all as specified and as directed . Make : IPH 21 EB of Harjas Coatings & Polymers / Nit bond EP of FOSROC or equivalent make in Dr. Fix it of Pidilite Industries / MC Bauchemie / BASF

Material and labour for applying polymer modified cement mortar rendering 15mm average thick in cement mortar 1:3 on concrete surface duly mixing polymer modifier 'Nitobond AR' of make: M/s Fosroc Chemicals India (P) Ltd. @ 10 Ltr per bag of cement or equivalent in M/s Harjas Coatings & Polymers @ 5% by weight of cement / M/s Pidilite Industries complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions.

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exceeding 1.5 sqm each including fittings complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings complete all as specified and as directed.

Taking down shutter of any description carefully, area not exceeding 1.0 sqm each including all fittings etc complete all as specified and as directed.

Taking down shutter of any description carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc complete all as specified and as directed.

Taking down and refixing in same opening after necessary cutting or easing of shutter of any description carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each etc complete all as specified and as directed.

Taking down and refixing in same opening after necessary cutting or easing of shutter of any description carefully, area not exceeding 1.0 sqm each etc complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 174 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed.

Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fix second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

Cutting holes exceeding half brick but not exceeding one brick thick in brick walls built in cement mortar or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in cement mortar 1:3 or plain cement concrete 1:2:4, type B-1 as required etc complete all as specified and as directed.

Material and labour for mild steel flat iron for bands, straps, supports, hand made sliding bolts, clamps, hold fasts and similar small articles conforming to Fe290-0 Gde E-165 etc complete all as specified and as directed.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and as directed .

Supply and fix 30mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix aluminium alloy wire cloth of 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple complete all as specified and as directed.

Supply and fix figured glass 4mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix in repairs aluminium alloy wire cloth of 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple complete all as specified and as directed.

Material and labour for plain fillets square, rectangular or triangular insection, clean sawn, secured with nails or brads not exceeding 3 Sq.cm complete all as specified and as directed.

Supply and fix 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane etc complete all as specified and directed.

Material and labour for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, ISI marked complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed.

Supply and fix aluminium alloy handles fabricated & fancy type polished of size 150mm complete all as specified and as directed.

Supply and fix in repairs aluminium alloy handles fabricated & fancy type polished of size 100mm complete all as specified and as directed.

Supply and fix in repairs aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed.

Supply and fix stainless steel butt hinges, of size 75mm with ISI mark fixed with brass screws etc complete all as specified and as directed.

Supply and fix stainless steel butt hinges, of size 100mm with ISI mark fixed with brass screws etc complete all as specified and as directed.

Supply and fix in repairs stainless steel butt hinges, of size 75mm with ISI mark fixed with brass screws etc complete all as specified and as directed.

Supply and fix in repairs stainless steel butt hinges, of size 100mm with ISI mark fixed with brass screws etc complete all as specified and as directed.

Supply and fix in repairs 18mm thick plywood, grade BWP, type BB fixed in cup board shutters, shelves & partition fixed with screw to timber framed work etc complete all as specified and as directed.

Material and labour for 0.9mm thick decorative laminates type- I surface finish, colour and pattern as approved including all necessary cutting to the size and pasting to the wood surface with and including approved synthetic adhesive as per manufacturer's instructions etc complete all as specified and as directed.

Supply and fix stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters complete all as specified and as directed.

Supply and fix 100mm long aluminium anodised hasp and staples, safety type with hinges including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix in repair curtain Rod, stainless steel 25 mm dia complete all as specified and as directed.

Supply and fix in repair stainless steel brackets suitable for curtain Rod 25 mm dia complete all as specified and as directed.

Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever mild steel angle brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling, PVC waste pipe of 32mm bore of suitable length etc complete all as specified and as directed.

Supply and fix in repair Wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

Supply and fix 32 mm (Dia of discharge pipe) Waste coupling of brass chromium plated (half or full threaded) complete all as specified and as directed. .

Supply and fix 40 mm (Dia of discharge pipe) Waste coupling of brass chromium plated (half or full threaded) complete all as specified and as directed.

Supply and fix in repairs PVC flexible waste pipe of 32 /40 mm for wash hand basin and Kitchen sink complete all as specified and as directed.

Supply and fix in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix in repairs stop valves cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

Supply and fix in repairs stop valves (concealed type) cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

Supply and fix Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix Bib Taps, long body with flange cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

Supply and fix in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs Vitreous China wash down water closet pan with P or S trap (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fix in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slim line or Cera or equivalent make complete all as specified and as directed.

Supply and fix in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank ,Geyser etc complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete / PVC (SWR) drain pipes of size 75/100 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed.

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 75 in repairs mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) bends with access door 75mm dia complete all as specified and as directed.

S&F in repair 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F in repairs 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

S & F in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) bends with access door 110mm dia complete all as specified and as directed.

S&F in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.

S & F in repairs Stainless Steel plate rack of size 600 mm X 580 mm of super deluxe model, suitable for 10 plates made with 22 gauge sheet and weight not less than 2.8 Kg, complete all as specified and as directed.

M & L for complete removal of existing treatment on wall & finishing the surface & applying two coat of oil bound distemper along with primer complete all as specified and as directed.

M & L for complete removal of existing treatment on ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment on external walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 etc complete all as specified and as directed.

Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparing old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for special treatment of sunken portion of WCs and Bath room as per following stages: Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:4 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instruction Stage 5:- Again rendering 10mm thick in CM 1:4 mixed with Dr Fixit Pidicrete URP or plaster seal of STP Ltd. Stage 6:- All sewage pipe joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP. Stage 7:- Making holes in wall and fixing 600mm long 20mm dia GI spout for draining the surplus water if any.

E/M Works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area), drawn through and including suitable dia non metallic rigid PVC conduit (ISI marked) and accessories concealed in wall/ roof including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge for the following. Note: (i) Cost of modular type sunken terminal boxes, cover plate with frame (modular plate) for mounting of switches, socket outlets, regulators etc will deemed to be included in the unit quoted rate. (ii) Cost of blank plate required if any will deemed to be included in the unit quoted rate. (iii) Cost of cutting chases in stone masonry/ brick masonry wall/ ceiling surfaces will deemed to be included in the unit quoted rate. (iv) Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rate.

One light / fan / bell / buzzer point controlled by one, one way switch complete all as specified and as directed.

One 3/5 pin 5 Amps socket point on the same board with other switches controlled by one switch complete all as specified and as directed.

One 3/5 pin 5 Amps socket outlet point on independent board complete all as specified and as directed.

All as per item No 120.00 described here-in-before but for point wiring with 2.5 sqmm single core standard FRLS copper conductor and one run of 2.5 sqmm FRLS copper conductor, standard for earth wire for one 3/5 pin socket outlet point 15 amps on the independent board complete all as specified and as directed..

Supply and fix Modular type switch single pole 6A, one way, 1 module, 240V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, 240V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular Bell push 6A, 1 module, 240V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular fan step regulator, 120W, 2 module, 240V, AC, 50Hz, ISI marked suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply and fix Modular socket, 6A, 240volts, 2/3 pin combined 2 module, ISI marked flush type complete all as specified and as directed.

Supply and fix Modular socket, 6A/16A, 240volts, 2/3 pin combined 2 module, ISI marked flush type complete all as specified and as directed.

Supply and fix Ceiling rose, surface type polycarbonate insulated body, three terminal 65x50mm, ISI marked complete all as specified and as directed.

Supply and fix lamp holder, insulated body of PVC/ polycarbonate type with back plate suitable for angle/ batten fittings, ISI marked complete all as specified and as directed.

Supply and fix Call bell/ buzzer, electric (Ding-dong type) suitable for working on 240 volts AC supply complete all as specified and as directed.

Supply and fix distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof double door, VTPN 4 way, 415volts grade with 200 Amps insulated busbar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP-43 protection with poly urethane casketing, IK-08 mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing,MCCB, MCB TP/SP/SPN etc including taking down existing unserviceable one etc complete all as specified and directed.

Supply and fix in replacement of MCCBs triple pole and neutral 100 Amps, 415V, 16KA, 4 Pole (Ics=100% of Icu) Breaking capacity with adjustable overload & adjustable Short circuit setting thermal magnetic release complete all as specified and as directed

Supply and fix sheet metal enclosure double door powder painted for MCB DB SPN 8 way with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and as directed.

Supply and fix MCB single pole 5 to 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc, complete with connection, testing and commissioning and taking down old unserviceable one from the site complete all as specified and directed.

All as per item No 134 described here-in-before but for MCB single pole 40 Amps complete all as specified and as directed.

All as per item No 134 described here-in-before but for MCB single pole 32 Amps complete all as specified and as directed.

Material and labour for sub main wiring complete with and including two runs of 6 sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit of suitable size including accessories etc as required and concealed in walls/ floors and 6 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing sub main wiring complete all as specified and as directed. Note : (i) Two runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) The cost of cutting chases and the cost of making good the disturbed surfaces is deemed to be included in the quoted rate.

Material and labour for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 m below ground level and connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI wire protection (upto 7.5m long) & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed. Note: On completion of the work/job the Contractor is to perform earth resistance tests for each earthing job in the presence of the Engineer-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/IS then the job is to be redone without any extra cost to the Department till the results are satisfactory.

Supply and fix LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC, minimum efficiency 120 lum/ watt decorative type with warm/ cool white (as directed by Engineer-in-Charge), driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing smart extruded polycarbonate LED battern (4th ft) of 20/40 W with higher efficacy microwave sensor to save more energy reduces the light intensity by 70% during non occupancy connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting 1x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down carefully existing serviceable ceiling fan/ wall mounted fan, ceiling cable end etc, removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks hold fasteners etc and connection up, including making electric connection from ceiling rose or connector to fan complete all as specified and as directed

Taking down carefully existing serviceable exhaust fan, ceiling cable end etc, removing the fan for keeping in safe custody, fixing the exhaust fan connecting up after rewiring, including making electric connection from ceiling rose/ connector to fan complete all as specified and as directed.

Supply and fix 4 watt wall lamp froasted glass chrome finish with bulb complete all as specified and as directed.

Powertech Engineers (BID ID -3388105)

PINKATRON SECURITIES PRIVATE LIMITED (BID ID -3383113)

M/S AMBATTU CONSTRUCTIONS (BID ID -3387924)

SCION ENTERPRISES (BID ID -3396086)

Archana Transport (BID ID -3387403)