Loading
Loading…
Loading…
Tender ID
Tender Value
₹24.7 L
EMD Value
₹49,448
Closing Date
26 Nov 2025, 11:00 pmClosed
Karnataka Power Corporation Limited
a)Scope of work covers Supply and installation of Pressure Switches and Pressure Guages along with accessories required for clinker grinders and at the other areas of AHP systems.The contractor/agency shall supply the materials as per the technical specifications and requirement.c)Before quoting the bid/supply of materials, the contractor/agency should visit to RTPS site for the assessment of site conditions and to knew about the sample materials,so as to supply the quality/branded materials as per the customer requirement. d)It is the single point responsibility of the contractor/agency to supply and install the materials under the supervision of site engineer.e)The manpower and T&P required for the installation of supplied materials shall be arranged by the contractor/agency itself. f)The contractor/agency shall replace the supplied materials at free of cost, if it got damaged during transit OR while carrying out installation work.g)The contractor/agency shall complete the supply & installation work within the contract period,otherwise penalty will be imposed as per the penalty clause mentioned in the bid document. h) The contractor/agency shall handover the site to KPCL in healthy and good condition after completion of work.
KPCL/2025-26/PS/WORK_INDENT3560/CALL-2
KPCL/2025-26/PS/WORK_INDENT3560/CALL-2
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer IOLA2 Office RTPS Raichur
₹620
₹49,448
19 Nov 2025
19 Nov 2025
28 Nov 2025
21 Nov 2025
Supply and installation of pressure switches and pressure gauges along with accessories required for clinker grinders and at the other areas of AHP systems.
Pressure gauge,Range:0-10
Ksc,endConnection:1/2"BSP(M), Pressure
Fluid: Compressed Air/Water/Oil,dial size:150
mm,Sensing element:diaphragm,Accuracy : +/- 1.0% of F.S.D,Working pressure. : 10-70% of S...
Pressure gauge,Range:0-16
Ksc,end Connection:1/2"BSP(M),Pressure
Fluid: Compressed Air/Water/Oil,dial size:150
mm,Sensing element: diaphragm,Accuracy : +/- 1.0% of F.S.D,Working pressure. : 10-70% of ...
Pressure gauge,Range:0-25Ksc,end Connection:1/2" BSP(M), Pressure Fluid: Compressed Air/Water/Oil, dial size:150 mm,Sensing element: diaphragm,Accuracy : +/- 1.0% of F.S.D,Working pressure. : 10-70% o...
Pressure Switch Operating Range: 0.7 to 14.0 ksc. MAX MAX WORKING PRESS. PROOF PRESS: 40 ksc
MAX PROCESS TEMP: 350 Deg.C,Repeatability:+/-0.5%FSR,ACCURACY: +/-0.5%FSR,PROCESS CONNECTION: 1/2" BSP (M),...
Pressure Switch,make:indfoss, Model:RT-120,range:10KSC,Sensing element:SS304,Accuracy:+/-1%,differntial:Adjustable,Mounting:Field Mounting,Process Connection:1/2"BSP(M),Contact Rating:110VAC,5Amps,swi...
(1/2)"BSP(F) S.S 316 ---- Essential documents needs to be furnished as per tender document
INDUCTIVE PROXIMITY SWITCHES:
Type : PNP- NO, Non- flush,Input Voltage: 24 V DC, load current : 300 mA,Diameter : 30mm,Sensing Distance : 10 mm,Cable : 3 wire (copper) , 2 meter length,Service : AHP &...
Polyurethene Tube,Material: Polurethane,Outer Diameter: 10mm, Inner Diameter: 7mm,Max Working Pressure: 10Bar,Operating Temperature 5-60Deg, Medium: Compressed Air,Burst Pressure: 25Bar,Make: FESTO --...
Quick star push in fittingsMAKE : FESTO/Uflow ,Quick Star Pushing Fittings,Auto Lock Fittings,End Connection: 1/4", Model/Type: QS-1/4-10,OD: 10mm ---- Essential documents needs to be furnished as per...
QUICK STAR FITTINGS,Make: festo or uflow,Auto lock type "T" fittings,OD : 6mm,Model/ type:QS-1/4-10,End Connection : 1/4" Male ---- Essential documents needs to be furnished as per tender document
QUICK STAR FITTINGS,MAKE: FESTO OR Uflow,Quick star Fittings,Auto Lock type,End Conn.: 1/2",Type/Model: QS-1/2-10, OD : 10mm ---- Essential documents needs to be furnished as per tender document
MAKE: FESTO OR Uflow,Quick Star Fittings,Auto Lock fittings,End Connection: 3/8",Model/Type : QS-3/8-10,OD : 10mm ---- Essential documents needs to be furnished as per tender document
BAG FILTER CONTROLLER 10 CH,Bag filter controller with spike protector,Ordering code: SFBAM10TS230230E5,Solid state timer with feedback auto manual,Individual fuse protection for Solenoid.input voltag...
D16 Diaphragms,Make: Maniks Model: MEP114
service: Bag filter purging ---- Essential documents needs to be furnished as per tender document
D114 Diaphragms,service: Bag filter purging.
Spare Diaphragm for buffer hopper purging
solenoids,Make:Maniks,Model:D114,Service:U5&6 AHP ---- Essential documents needs to be furnished as per tender do...
QUICK STAR 1/4" OD-6MM(M)
Quick Star Pushing Fittings,make:festo/uflow
Auto Lock Fittings End Connection : 1/4" (MALE)
Model Type : QS-1/4-6 OD: 6MM ---- Essential documents needs to be furnished as p...
QUICK STAR 1/4" OD-6MM(F)
make: festo/uflow,Quick Star Pushing Fittings
Auto Lock Fittings,End Connection : 1/4" (FEMALE)
Model Type : QS-1/4-6,OD : 6MM ---- Essential documents needs to be furnished ...
D18 Diaphragms, service: Bag filter purging ---- Essential documents needs to be furnished as per tender document
Installation Charges ---- Essential documents needs to be furnished as per tender document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .