SPECIAL REPAIR TO BLDG NO P-83 (1 TO 3), BUNGALOW NO -57, CATTLE FENCING TO BLDG NO P- 97/1 TO 8, AND PROVISION OF PARTITION WALL IN BLDG NO T-05, 02 X TOILET WITH COMMAN WASHROOM , INTERLOCKING PAVERS AT RA-1 UNDER GE WEST BAREILLY

Amount

Dismantling timber scantling 40sqcm and over in section, in any position framed sections (roof trusses) complete all as specified and directed.

M & L for second class hard wood clean sawn in scantling fixed to framed structures complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified.

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J or L hook complete all as specified and directed.

S & F in repairs 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, vally gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar complete all specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm each including iron mongeries, hold fast etc and including making good disturbed portions of walls in CM(1:4) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5sqm but not exc 4sqm each including iron mongeries, hold fast etc and including making good disturbed portions of walls in CM(1:4) complete all as specified and directed.

Taking down shutters of any description not exceeding 1.0sqm each including iron mongries, hold fast etc and removing to or from store complete all as specified and directed.

Taking down shutters of any description exceeding 1.0sqm but not exceeding 2.0sqm each including iron mongries, hold fast etc and removing to or from store complete all as specified and directed.

M & L for demolition of cement concrete in any position and in any description complete all as specified and directed by Engineer-in-charge.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair complete all as specified and as directed.

M & L for 40mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished even and fair complete all as specified and as directed.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 30 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side including teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

M & L for 35mm thick second class hardwood glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed.

S & F of 18 to 25mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as directed.

S & F of 25mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as directed.

S & F 100mm hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as directed.

S & F 100mm long ISI marked mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S & F 200mm long ISI marked mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed complete all as specified and directed.

S & F 300mm long ISI marked mild steel sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 125mm long ISI marked mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F 300 mm long ordinary rat tail pattern springs including roller and roller plate complete all as specified and directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n.exc 200 cu. cm each complete all as directed.

S & F in repair stainless steel curtain rods 25mm dia with matching bracket and ends etc complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

S & F 100mm long medium weight, cold rolled stainless steel butt hinges with steel screws complete all as specified and as directed by Engineer-in-charge.

S & F aluminium handle, cast type anodised size of handle 125mm ISI marked .

S & F aluminium anodised, barrel tower bolts of extruded section length of bolt 150 mm ISI marked.

S & F steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and directed.

S & F mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc with end of bars shouldered and or riveted, or forged into spikes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane all as specified or as directed.

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

S & F in repair 4mm thick E- Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

M & L for pre-cast cement concrete kerb stone of size (300mm x 300mm x 100mm) and setting in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

M & L 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for rubber moulded machine pressed pre-cast concrete colour interlocking paver block with grey cement and pigment, shape and size, conforming to IS - 15658-2006 of 60 mm thickness of M-35 grade complete all as specified and directed.

M & L for 25 mm thick sand cushioning under floors including watering as required complete all as specified and directed.

M & L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of CM(1:6) including dismantling of existing tiling and cement mortar bedding complete all as specified or as directed.

M & L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm as in skirting jointed in neat cement slurry and pointed in white or coloured cement over and including 10 mm thick rendering in CM(1:4) and including dismantling of existing tiling and cement mortar bedding complete all as specified or as directed.

M & L for colour printed glazed ceramic coloured tiles in vertical surface (300/350) x 450 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering or bedding layer of CM(1:4) and dismantling of existing tiling and bedding complete all as specified or as directed

M & L for rendering 15mm thick on brick work or concrete surfaces in CM(1:6) finishing the surface even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M & L for rendering 15mm thick on brick work or concrete surfaces in CM(1:4) finishing the surface even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing old surfaces of walls (old decorated plastered or unplastered) and applying one coat of white wash complete all as specified and directed.

M & L for preparation of new surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for applying 3mm thick wall care putty on wall complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

M & L for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unsv water tank capacity exc 250 but n exc. 500 litre complete all as specified in SSR Part I.

S & F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S & F for 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends or iron pipe and fixed including all fittings complete all as specified or as directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in PCC or CM(1:3) not exceeding 10 cm girth complete all as specified and directed.

S & F in repair of 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking up or down 15 mm dia steel tubing and connections complete all as specified or as directed.

S & F in repair of 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking up or down 20 mm dia steel tubing and connections complete all as specified or as directed.

S & F in repair of 15mm bore bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified or as directed..

S & F in repair of 15mm bore stop valve, fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified and directed. .

S & F in repair PTMT grating size 125mm fixed with white cement complete all as specified or as directed.

S & F in repair vitreous china wash hand basin white/coloured flat back or angle back type of size 550mm x 400mm in repairs including cutting for and pinning ends of brackets including 32mm bore PTMT waste coupling (half or full threaded) and PVC waste pipe 32mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified or as directed.

S & F in repair 15mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed.

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified or as directed.

S & F in repair for 15mm dia concealed stop cock fancy type, cast copper alloy chromium plated long shank and cup washers, crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore all as specified or as directed..

S & F in repair for PVC low level flushing cistern 10Ltrs capacity with all internal accessories and fixed to wall including provision of 450mm PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete all as specified or as directed..

S & F in repair towel ring of Stainless steel fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S & F in repairs soap dish, brass chromium plated fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints laid in floors or trenches including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) soil waste and vent pipes, rain water pipes, drainage pipes single socketed in any length with rubber ring joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern), including fittings, heads, shoes, bends, swan-necks etc and removal to store complete all as specified or as directed.

S & F in repair 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair of PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 630x450 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course including demolition of cement concrete all as specified and directed.

M & L for 15mm thick rendering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 100ml per 50 Kg of cement complete all as specified and directed. (WPC measured and paid seperately)

Supply only liquid water proofing compound.

Providing water proofing treatment to accessible/non accessible RCC roof slabs with Atactic Polypropylene modified polymeric membrane as specified and described as under: - (a) Applying one coat of blown type bitumen of grade 85/25 heated to a working temperature of 180 degree centigrade and applied @ 1.2 kg per square meter of the surface area over a coat of bitumen primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacurer's instructions complete all as specified and directed (b) Supply and providing APP modified polymeric membrane having following physical and chemical parameters: - (i) Centre core - 100 Micron HMHPDE (ii) Film - 20 Micron HMHPDE (iii) Thickness - 2.00 mm (iv) Weight - 3.00 Kg/Sqm NOTE:- Laying shall be done all as per manufacture's instruction and all as specified in clauses 11.43 of MES SSR-2009 Specifications. (PCC tiles over screed shall be provided over the APP Modified Poymeric membrane or alumnium paint which shall be measured and paid separately against the respective item). (Make of APP Membrane: IWL India Limidted Hyperplas, Pidilite Industries Ltd & The Structural Water Proofing Co Pvt Ltd).

M & L for applying one coat of aluminium paint over APP membrane complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

M & L for cement concrete type B2 1:2:4 (40 mm graded aggregate) in foundations, filling and mass concrete

S&F post and struts in fencing including cutting top to shape as directed, drilling holes notching for wire etc iron fillets ( for securing wiremess etc ) including necesarry drilling holes notching for wire etc flat ironfillets ( for securing wiremess etc ) including a necessary drilling bolting or rivetting etc and similar work conforming to Fe290 Gde E-165

S & F angle iron or flat iron as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M & L for mild steel bar 10mm dia and over TMT bar, cut to length, bent to shape, required including cranking bending spirally for hooking ends etc and binding with MS Wire (annealed) not less than 0.90mm dia, all as specified and directed by Engr-in-Charge.

Ditto as per above Item but 6 to 8 mm dia

Supply only chain link fencing, galvanised mild steel of mesh 50mm x 50mm size, 4mm gauge complete all as specified.

Fixing only chain link fencing, including line wires 50mm x 50mm mesh, 4mm gauge galvanised mild steel to any type of standards, rails, straining bolts etc complete.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide

Preparation of new steel surfaces and applying two coats of black bituminuous paint over a coat of red oxide.

M & L Framed work as in doors or gates of angle or other section with gusset plate or rails ,baraces ,etc.compltete drill for fixing steel sheeting or other covering door etc to be prepared for hanging or sliding with and including with hanging and higes (excluding steel sheeting or other covering ,running rails and guides.) and hanging also fastening complete.conforming to FE -410 GDE E 250.

Removing excavated material n.exc 50 Mtr and depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard soil

M&L for Cement concrete type D2 (1:4:8) in foundations, filling and mass concrete

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fairr finish surfaces

M&L for RCC M25 in Columns, pillars, piers, posts and struts

M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces of CM 1:4

M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces of CM 1:6

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

S& F 1.25 mm thick mild steel plain black sheet in door shutters

Demolition of reinfoced cement concrete of any position of any description not otherwise specifically provided complete all as specified and direcetd.

M & L for providing precast cement concrete 1:2:4 type -B1 using 20 mm graded stone aggregate as in cover slabs, shelves and similar articles with plain faces and set in cement mortar 1:6 including required formwork complete all as specified and directed.

S & F 75mm long ISI marked mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F of steel windows with pressed steel frame (size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg stay complete with glazed openable shutter with glazing bar(open out side) and wire gauged openable shutter without glazing bar(open inside), dovetailed or welded complete all as specified and directed and all as per Drg given by Engr in charge ref TD No 088 dt 01 Jan 2002. NOTE :- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (iii) MS grill shall be measured and paid separatly under relevant item of schedule

M & L hard core of broken stone aggregate of guage exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar (1:6) 15 mm thick and dismantling of floor tile including cement mortar bedding complete all as specified or as directed.

M & L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering or bedding layer of CM(1:4) and dismantling including cement mortar bedding complete all as specified or as directed.

M & L for rendering 10mm thick on ceiling in CM(1:4) finishing the surface even and smooth without using extra cement including taking down plaster from ceiling including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M & L for preparing new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for preparing new surfaces of walls and applying two coats of cement based paint over a coat of primer all as specified or as directed.

S & F in repair brass CP wall mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair pedestal pattern vitreous china wash hand basin white/ coloured size 550mm x 400mm, including brackets and including cutting for and pinning in ends of brackets including 32mm bore PTMT waste coupling, PVC waste pipe 32mm dia, PVC connection 450mm long PTMT nuts complete all as specified and directed.

S & F in repair brass CP wash basin mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs vitreous china water closet pedastal pattern white, including mild steel chromium plated or aluminised hinging device with seat cover white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding/cement concrete complete including making good to floor all as specified and directed.

S & F in repairs spray jet stainless steel chromium plated for EWC complete all as specified and directed.

S & F in repair CP health faucet with 1.5 m tube & hook complete all as specified and directed.

M & L for RCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in roof for maintaining the uniform slope etc any thickness at any height and in any position including demolition of lime concrete complete all as specified and directed. (Reinforcement to be measured and paid seperately)

M & L for hard drawn steel wire fabric not exc 4.0kg/sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt all as specified and directed.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone wall built in lime mortar or wall of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required superfacial area n exc 150 sq cm

M&L for Cutting openings, through brick/stone walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m ®

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

M&L for RCC Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span

S&F for 50mm dia Tubes, 'Medium grade', galvanised, with all fitting; laid in trenches

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M & L for Brick work with fly ash bricks old brick size, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M & L for Brickwork with flyash old bricks size, straight or curved on plan to any radius i n half brick thick walls, built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M & L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and as directed by the Engineer-in-Charge

M & L for Rendering 10mm thick in Cement plaster 1:3 on ceilings, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for Joint free Glazed Coloured Ceramic tiles in vertical surface of size 450x300mm & 7-8mm thick set and joint in neat cement slury and pointed in white or colour cement to match including rendering 10mm thick in cement plaster 1:4 finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge

M & L for joint free Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 20mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, all as specified and as directed by the Engineer-in-Charge

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC 1:1:2 (Using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M&L for RCC 1:1:2 (Using 20mm graded stone aggregate) in chhajjas complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges

S & F Aluminium Powder coated (Colour) section for in door, window, Ventilator, glazed with aluminium shutter weighting 0.55Kg/M including 2nos matching handle necessary fitting of suitable size , one or more rebates, cut to jointed together with cadmium lated steel screws including rubber bending of gasket for aluminium section for fixing glass/jali and necessadry fitting, screws plugs for fixing screws etc complete and all as specified or as directed by Engr in charge

S&F for colour powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination compltete all as specified and directed.

S&F for 4mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 sq. m in each pane

Ditto, but exc 0.5 sq. m in each pane

S&F wash hand basin vitreous China flat back 550x400mm size white, make Regal of Hindware Cat Part No 10054 including pedestal of Cat part No 11018 or Equivalent in Parryware including PVC waste coupling 32mm size, PVC corrugated waste pipe 32mm bore, pair of brackets of mild steel 35 x 35 x 6mm size complete all as specified and directed by Engineer-in-Charge.Make: HINDWARE/PARRYWARE/ FOR WHB, PRAYAG FOR PVC FITTINGS.

S& for PVC connections 15mm size with PTMT nuts of length 450mm

S&F stop valve/angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore make Jaguar

S&F for 15 mm dia concealed stop cock fancy type, cast copper alloy chromium plated long shank and cup washers, crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore make Jaguar all as specified or as directed..

S&F 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts make Jaguar or as specified or as directed.

M&L for Green/black Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types including cutting and moulding of green/black marblein oval shaped to accommodte for WHB or Urinal pot complete all as specified of as directed by engr-in-charge

S&F for PVC (SWR) pipes 100/110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for PVC (SWR) bends 100/110mm dia any radius

S&F for PVC (SWR) bends 75mm dia any radius

S&F for PVC (SWR) junction single/double equal or unequa 75mm dia

S&F for PVC (SWR) junction single/double equal or unequa 100/110mm dia

S&F for PVC (SWR) vent cowl 75mm dia

S&F CI soil waste and vent pipes 100mm bore size sand cast in any length with or without ears with cement joints laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F cast iron bends any radius, dimishing pieces or traps 100mm bore size complete all as specified and directed by Engineer-in-Charge.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including cutting and chassis the wall.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including cutting and chassis the wall.

M&L for 15mm thick water proofing plastering on flat/sloped surfaces on RCC roof whilest concrete is still green in CM 1:3 finished even and smooth complete all as specified.(water proofing will be paid for seprately).

Supply and fix bib taps 15 mm bore chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make-Jaquar(Queens) all as specified and as directed by Engineer-in-Charge.

S&F for 500 liters capacity rotational moulded polyethylene water storage tanks(cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I and as directed by Engineer-in-Charge.

M&L for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 150mm dia pipes.

S&F 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed including connect to septic tank and soak well as specified

S&F Salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ complete all as specified and directed by Engineer in charge.

M&L for construction of brick masonary septic tank for 10 users capacity, with and including necessary excavation, earth work, brick work, concrete work, plastering, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No. 217 & specification (without sluice valve and sludge chamber) complete all as specified and directed.

M&L for construction of soak well 1.2 mtr dia and 3.0 mtr effiective depth with and including necessary excavation, earth work, brick work, plastering, filling with brick bats, PCC on top, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No. 309 & specification complete all as specified and directed.

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down carefully UNSV main switch DBs and MCBs of any description of an size in any position complete all as specified.

Taking down submain wiring including all accessories complete all as specified and directed.

Taking down light fittings of any type including all accessories complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (FRLS) multi strand PVC insulated and unsheathed copper conductor cable concealed in PVC conduit 20 mm dia and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent

All as per item 185 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

M&L for sub main wiring with two single core 4.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FR) and one run of 2.5 sqmm (FR) copper conductor shall be measured as one unit length.)

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

S&F switch socket combination out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

S&F bell push flush type 5 Amp

S&F bell ding dong musical ,AC, 230 Volt, single pole

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

Supply and fix in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed .

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed.

Supply and fixing surface mounting LED indoor PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.

Taking down, testing and repair/rewinding and replacement of items such as bearing, shaft , condenser etc of ceiling fans heavy duty 1200mm sweep, 230 volt, AC, 50 Hz single phase complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified and directed by Engr-in Charge.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

S&F bulk head light fitting, 1x10W LED attractive surface mounted type, with sheet steel housing with opal acrylic diffuser and decorative end plates. Plastic housing wire , suitable for mirror fittings, , lamp holders, connector blocks incl LED lamp10 Watt etc. complete with all accessories in and including connecting up with twin core twisted flexible copper conductor cable with suitable size copper wire complete all as specified and directed.

M&L for dismantling the electronic/ electric meter from wooden board and refixing the same with proper concealed connections on the same and testing after completion for reading complete all as specified and directed.

S&F indoor decorative LED light fitting suitable for 3 to 5 watt LED lamp with brass made bracket with round base lacquered having brass holder and brass gallery with glass including lamp complete all as specified and directed.

Supply olny LED lamp 12 watt, 230 V, AC integrated circuit complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core as required at site.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables all as specified and directed . Note:-Punned sand layers measured only.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

M & L for GI tubing light grade 40 mm bore complete with all fittings like bends, sockets, elbows etc for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.

Supply, installing, testing and commissioning exhaust fans heavy duty 300 mm sweep, 230 volt, AC, 50 Hz single phase with louvers make Standard complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified.(Note:- Old exhaust fans should be deposited to AGE E/M store yard)

S&F Sheet metal enclosure factory fabricated for multiphase out going shitable for mounting MCCB as incomer of rating 100 Amp Vertical distribution board 4 way with suitable Amp rated bus bar having IP-42 protection and double metal door concealed in wall including connection with aluminium thibles as required completed all as specified. (Note : MCCB & MCB shall be Measured and paid Separately)

S&F for MCCB 100 Amp, 25 KA,Ics=100%Icu 4 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed by the Engr-in-Charge.

S&F MCB SPN 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole 6 to 10 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core

Notes:-

hardeep singh enterprises

SANJEEV ENTERPRISES

TRISHOOL ASSOCIATE

M/S Shree Sai Builders

Shikhar ji Enterprises