Repair and Maintenance of Backhoe Loader Excavator wheel Mounted Escorts 611F007420

Amount

Detail of Scope of Work can be had from SBD of the e-NIT

1. Oil Change Service (Including Hydraulic Oil) Engine Oil Replacement: New high-grade oil (15-18 liters) Oil Filter Replacement: Hydraulic Oil Replacement: Fresh hydraulic oil and filters (approximately 100 liters) is added to ensure proper lubrication of hydraulic components. Fuel Filter Replacement: Air Filter Replacement: The coolant reservoir is checked and topped up with antifreeze to prevent freezing and overheating of the engine. Proper coolant levels are essential for engine efficiency in cold conditions. Complete Job Includes Transportation , material and Labour Charges and Taxes.

Bucket Toe Plate Replacement: The bucket’s toe plate, which bears the brunt of wear during heavy snow-clearing operations, is cut off using a blowtorch or grinder. A new steel toe plate is then welded onto the bucket's edge to restore functionality and efficiency. Complete Job Includes Transportation , material and Labour Charges and Taxes.

Hydraulic Hose Replacement: (3 Nos) Hydraulic hoses are inspected for cracks or leaks. Damaged hoses are removed, and new hoses are fitted to ensure the hydraulic system operates effectively under pressure. Complete Job Includes Transportation , material and Labour Charges and Taxes.

Pins and Bushings Replacement: Worn pins and bushings are replaced to maintain tight movements in the loader arm. The loader arm is secured, and old pins and bushings are removed and replaced with new, precision-machined parts. Complete Job Includes Transportation , material and Labour Charges and Taxes..

Battery Replacement: The battery is disconnected and removed. A new battery, designed for cold weather, is installed to ensure reliable starting and power for electrical systems. Complete Job Includes Transportation , material and Labour Charges and Taxes.

The hydraulic pump is inspected for performance issues. Hydraulic pump parts replacement involves several key steps to restore functionality. First, the pump is dismantled to access components like seals, gaskets, bearings, and the pump shaft. Worn seals and gaskets are replaced to prevent leaks, while bearings are replaced to ensure smooth operation. If the pump shaft is bent or damaged, it is swapped out for a new one. The valve plate, which controls fluid flow, is also replaced if necessary. After replacing the parts, the pump is reassembled and tested to ensure it operates efficiently without leaks or loss of pressure.Complete Job Includes Transportation , material and Labour Charges and Taxes..

VEE AUTO TRADERS (BID ID -2176649)

JAIN LUBRICANTS AND MOTOR SPARE PARTS (BID ID -2178238)