Renovation of entry path from Sarai No 1 to main Temple complex via Panda Gate forTemple Trust Sh. Naina Devi Ji, Distt. Bilaspur (HP)

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within all metres leads and lifts complete in all respect (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) as per direction and best satisfaction of Engineer -in- Charge

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over average thick base of laid and jointed with ISI make adhesive 200 grade and matching with pigment of shade including rubbing, curing and polishing complete: as specified (a) Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or approved by Trust or as per direction and best satisfaction of Engineer -in- Charge

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over average thick base of laid and jointed with adhesive ISI make 200 grade and matching with pigment white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified, (a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or approved by Trust or as per direction and best satisfaction of Engineer -in- Charge

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in walls/skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(a) Size of Tile 120x 600 mm as per direction and best satisfaction of Engineer -in- Charge

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc.,required size, on the top of the floor or the side of waist slab with suitable arrangement as per approved by the Trust, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) as per direction and best satisfaction of Engineer -in- Charge

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPD M gasket, stainless steel (SS 304 grade) friction hinges,zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished all, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) (A) Casement window single panel with S.S.friction hinges (350 x 19 x 1.9 mm), made of(small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of windowupto 2.75 sqm.) as per direction and best satisfaction of Engineer -in- Charge

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with (a) 5.5 mm thick glass panes as per direction and best satisfaction of Engineer -in- Charge

15 mm cement plaster on rough side of single or half brick wall of mix (a) 1:6 ( 1 cement : 6 coarse sand) as per direction and best satisfaction of Engineer -in- Charge

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge

Providing and fixing to existing door frames. (a) 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-incharge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (a) Kitchen sink without drain board 610x510 mm bowl depth 200 as per direction and best satisfaction of Engineer -in- Charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction and best satisfaction of Engineer -in- Charge

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives:- New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm as per direction and best satisfaction of Engineer -in- Charge

Sanjeev Kumar Govt Contractor