Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹32.5 L+₹53,524.61 (1.67%)Rejected-Finance | L2 | Rejected-Finance Being not lowest |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MCEME SECUNDERABAD
GE MCEME Secunderabad MCEME Campus, Trimulgherry (Post) Secunderabad - 500 015
PROVN OF FLY PROOFING TO WINDOW AND DOORS IN BLOCK NO 25,25,26 AND 31 MD ACCN AT TRISHUL LINES, ADDITION / ALTRATION TO QUARTER NO 131/3 AT NEW HASTING LINE AND PROVN OF PARTITION OF REPAIR BAY IN REPAIR INCREMENT SECTION AT MT at MCEME UNDER GEMCEME
2022_MES_535334_1
GE/MCEME/TOK/24 OF 22-23
Open Tender
Civil Works
Item Rate
180 days
GE MCEME SECUNDERABAD
Class D Category a(I)
8 documents required · 8 mandatory
₹500
GE MCEME SECUNDERABAD
₹59,000
Yes
19 Aug 2022
2 Jul 2022
3 Aug 2022
2 Jul 2022
1 Aug 2022
19 Jul 2022
60 days
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dense soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard / dense soil
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed by Engineer-in-Charge.
M&L for Treating the top surface of filled earth at rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
M&L for providing cement concrete Type D2 1:4:8 (Using 40mm graded aggregate) in foundations, filling and mass concrete
M&L Reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L Reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as spd and directed.
M&L Reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as spd and directed.
M&L Reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd and directed.
M&L Reinforced cement concrete (design Mix) M-25 (20 mm graded aggregate) in Chajjas complete all as spd and directed.
S&F mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and directed.
S&F mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and directed.
S&F mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and directed.
M&L for formwork to sides of rough finished flat surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as spd and directed.
M&L for formwork to sides of rough finished flat surface of concrete pillars, posts, struts, piers, columns and stanchions complete all as spd and directed.
M&L for formwork to sides and soffits of rough finished flat surface of concrete of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as spd and directed.
M&L for formwork to rough finished flat surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as spd and directed.
M&L for formwork to rough finished flat surface of concrete chullah hoods, chajjas, troughs and similar items including edges complete all as spd and directed.
M&L for formwork to edges of rough finished surface of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as spd and directed.
M&L 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.
M&L for damp proof course 25mm thick, in cement concerte 1:2:4, type B0 to horizontal or vertical surfaces including necessary formwork etc.complete all as spd and directed.
Forming jambs, etc. in cement mortar 1:6 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as spd and directed.
Cutting opening in cement concrete walls, with or without reinforcement (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as spd and directed.
M&L Brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spd and directed.
M&L Brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as spd and directed.
M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth (without using extra cement) with water proofing compound, complete all as specified and directed by Engineer-in-Charge. (Note : WPC will be measured and paid separately)
M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surface on wall, finished even and smooth (without using extra cement), complete all as specified and directed by Engineer-in-Charge.
M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth (without using extra cement) with water proofing compound, including taking down old cement plaster complete all as specified and directed by Engineer-in-Charge. (Note : WPC will be measured and paid separately
Supplied only liquid water proofing compound etc complete all as spd and directed.
M&L priming plastered roof surfaces with bituminous primer @ 0.3 Kg/sqm as per IS-3384 and providing water proofing treatment by applying mineral finish 3.5 Kg/sqm actatic poly propylene (advanced App torch membrane with fiber glass and finished on top with fiber glass mineral states torch incistern of thickness 3mm by torch bonding complete over and including rendering 10mm thick in CM 1:4 on concrete surfaces of roofs parapet etc, finishing to surfaces even and smooth with out using extra cement and providing necessary slope incl using WPC @ 3% or as per manufacturer instructions etc complete all as specifed and directed.
M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered wall surface and applying two coats of distemper oil emulsion over a cost of alkali resitance primer over two coat of wall care putty, complete all as specified and directed by Engineer-in-Charge.
M&L for Complete removal of existing treatment on wall surface and applying two coats of distemper oil emulsion over a cost of alkali resitance primer over two coat of wall care putty, complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing treatment on wall and finishing wall with Premium Acrylic smooth exterior paint with silicone additives of required shade new work(two or more coats applied @1.43 ltr/10sqm over and including priming coat of exterior primer applied @2.20 kg/10sqmr preparation of surface all as spd and directed.
M&L for finishing wall with Premium Acrylic smooth exterior paint with silicone additives of required shade new work(two or more coats applied @1.43 ltr/10sqm over and including priming coat of exterior primer applied @2.20 kg/10sqmr preparation of surface all as spd and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as spd and directed.
Spreading and levelling earth filling in floors in layers and well ramming including watering as required complete all as spd and directed.
Hardcore of broken stone guage exc 63mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as spd and directed.
M&L providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) , 100mm thick as in sub base in floor/paving etc. complete all as spd and directed.
M&L providing cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) , 25mm thick as in sub base in floor/paving etc. complete all as spd and directed.
S&F non Skid Coloured ceramic Tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in CM (1:6) all as directed.
M&L for Light shade, Vitrified Ceramic coloured tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding .42 sqm (600x600mm), in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match etc.
M&L for Light shade, Vitrified Ceramic coloured tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding .42 sqm (600x600mm), in floors etc. set and jointed in neat cement slurry on verticle surface as in skirting with 10 mm thick in cement plaster 1:3 on brick wall surfaces for fixing tiles all as specified and directed.
M&L for Light shade, Vitrified Ceramic coloured tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding .42 sqm (600x600mm), in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match etc. including dismantling existing tiles complete all as directed.
M&L for Light shade, Vitrified Ceramic coloured tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding .42 sqm (600x600mm), in floors etc. set and jointed in neat cement slurry on verticle surface as in skirting with 10 mm thick in cement plaster 1:3 on brick wall surfaces for fixing tiles all as specified and directed.
M&L coloured ceramic glazed tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc set in jointed in neat cement slurry over and incl 10mm thick cement screed in CM 1:3 and pointed to match the colour of tiles complete all as specified and directed.
M&L precast cement concrete type B1 1:2:4 type B1 (20mm graded aggregate) as in Manhole / Gully trap cover slab including use and waste of necessary form work set in CM 1:4 complete all as spd and directed.
M&L for cement concrete 1:2:4 type B1 ( using 20 mm graded aggregate) in , copings, haunching and benching the like including weathering, slightly rounded or chamfered angles and throating and as directed
Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as spd and directed.
Taking down chowkhats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames)
Taking down, Shutters of any description exc 1sq. M but n.exc 2.00 Sqm each, etc complete all as spd and directed.
S&F Solid PVC Door Frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.
S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.
S&F Windows/ventilators (NCL ECO–4000 Series Windows (Double Rebate Windows or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws with complete fittings all as directed
S&F for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. size of frame 125x60mm complete as specified and directed.
M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling in frame complete all as specifed and directed.
M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S & F 35 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on face is covered with decorative face veneer both sides complete all as spd and directed.
M&L for glazed and skeleton shutters 35mm thick 2nd class hard wood open rebated and prepared to receive glass, gauze etc divided into squares with plain chamfered or rounded or mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members as specified in SSR Part I, section 8 clause 8.24 (a) complete all as spd and directed.
S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as spd and directed.
S/F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel wire staples along with frame work of windows / ventilators with all necessary arrangements, complete all as specified and directed by Engineer-in-Charge.
M&L preparation of new wood surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.
M&L preparation of old wood surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed.
M&L preparation of new surface of steel any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specifed and directed.
M&L preparation of old surface of steel any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed.
M&L 2nd class hardwood exc 6 & n.exc 13 sqcm plain fillets square, rectangular or triangular insection, clean sawn, secured with nails orbrads etc, complete all as specified and directed by Engineer-in-Charge.
S&F aluminium butt hinges extruded aluminium alloy with galvanised anodise and of size 100mm (Type C-21), complete all as specified and directed by Engineer-in-Charge.
S&F extruded aluminium alloy handles, fabricated type, anodised handles fabricated type of size 150mm, complete all as specified and directed by Engineer-in-Charge.
S&F 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed by Engineer-in-Charge.
S&F steel windows/ventilator with slide/top hung shutters inculdign projecting/box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed by Engineer-in-Charge.
S& F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, etc complete all as per specified and directed by Engr-in-Charge.
M&L for preparation of new steel surfaces of any description,over 10cm in width or girth with two coats of synthetic enamal paint over a coat of red oxide, complete all as specified and directed by Engineer-in-Charge.
M/L for preparation of old steel surfaces of any description,over 10cm in width or girth with one coat of synthetic enamal paint, complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one, complete all as specified and directed by Engineer-in-Charge.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 sqm in each pan, complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in any position otherwise not specifically provided for, complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick / stone walls of any description including racking out joints hacking for keys scrubbing down with water, complete all as specified and directed by Engineer-in-Charge.
M&L for Two coats of Distempering with oil emulsion distemper on newly plastered surfaces of walls over two coat of wall care putty over a coat of alkali resistance primer including preparation of wall surfaces, complete all as specified and directed by Engineer-in-Charge.
S&F for Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11d, size of hinges in 100mm, etc complete all as spd and directed.
M&L for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, length of bolt in 100mm etc complete all as spd and directed.
M&L for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, length of bolt in 200mm etc complete all as spd and directed.
S&F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, length of bolt in 250mm etc complete all as spd and directed.
S&F 300mm, ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.
S&F for Brass handles, cast type, polished bright, Size of handle in 150mm, etc complete all as spd and directed.
S&F for Brass handles, cast type, polished bright, Size of handle in 100mm, etc complete all as spd and directed.
S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn spring fixed in floor, overall length of cover plate 150mm all as specified and directed.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as spd and directed.
S&F in repairs 18-19mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination & other side balancing white laminationixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge.
S & F Continuous (piano) hinges, of brass finish or elec trogalvanised of 30 mm flaps ( when open) complete all as spd and directed.
M&L for 18/19mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work, etc completed all as specified.
S&F mild steel galvanised tubes 15mm medium grade with all fitting, fixed to wall, ceiling or laying in floor.etc complete all as spd and directed.
S&F mild steel galvanised tubes 20mm medium grade with all fitting, fixed to wall, ceiling or laying in floor etc complete all as spd and directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as spd and directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as spd and directed.
M&L rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position all as specified in 1000 ltrs capacity with 15mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed.
S&F 10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge.
S&F PVC connection 15mm size, 450mm long with PTMP nuts both side, etc complete all as spd and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as spd and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as spd and directed.
S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as spd and directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as spd and directed.
S&F PVC (SWR) vent cowl 110mm bore complete all as spd and directed.
S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as spd and directed.
M&L salt glazed stone wave gully traps square or rounded mouthed type & fix 150x 100mm fixed in cement concrete complete all as spd and directed.
M&L salt glazed stoneware drain pipes laid in trenches & jointed as specified of 150mm dia complete all as spd and directed.
M&L Concrete bed to drain pipes of 150mm dia bore in PCC 1:3:6 type C-2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested including conection to man hole complete all as specified and as directed
M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs set in CM 1:6 complete all as spd and directed.
S&F Towel Rack 600 mm long without lower hanger but with 3 hooks complete all as spd and directed. Make : Jaguar Cat no:CAN-1181FHN or Its equivalent
S&F Corner glass shelf with railing of Make Jaguar Cat No: ACN1173 complete all as spd and directed. Make : Jaguar Cat no:CAN-1181FHN or Its equivalent
S & F Wall hung WC with UF soft slose seat cover hinges Accessories ,Set Size 385x5695x385 mm Make: Jaguar Cat No:KUS-WHT-35951 OR its equivalent
S&F counter top basin of size 610x475x210mm(QUEENS) of complete as directed by Engr-in-Charge. Make: Jaguar Cat part No JCS WHT 7601 or its equivalent.
S&F towel rail 600 mm long with lower hanger QUEENS complete as directed by Engr-in-Charge. Make: Jaguar Cat part No AQN 77781or its equivalent
S&F Soap dish QUEENS complete as directed by Engr-in-Charge. Make: Jaguar Cat part No AQN 7731or its equivalent
S&F angular stop cock with flange (QUEENS) complete as directed by Engr-in-Charge. Make: Jaguar Cat part No AQN 70 53or its equivalent
S&F health faucet (ABS with 8 mm dia, 1.2 m long flexible tube and wall hook (allied) complete all as directed by Engr-in-Charge. Make: Jaguar Cat part No ALD-CHR-593N or its equivalent
S&F toilet paper holder (QUEENS) complete as directed by Engr-in-Charge. Make: Jaguar Cat part No AQN 7751 or its equivalent
S&F two way bib cock with wall flange (QUEENS) complete as directed by Engr-in-Charge. Make: Jaguar Cat part No QQT-7041 or its equivalent
S&F in central hole basin mixer with regular spout with popup waste system with 450mm long braided hoses (QUEENS) complete as directed by Engr-in-Charge. Make: Jaguar Cat part No QQT-7169B or its equivalent
S&F in toilet paper holder (ABS Body) with 8 mmdia, 1.2 metre long flexible tube and wall hook (Allid) complete all as spd and directed.
S&F looking mirror of size 1.50 m long and 0.90 mtr wide with fancy glass with decorative beading complete all as directed.
S&F in wall mixer with over head showerr arrangement connecting leg and wall flange but without crutch and telephonic shower with suitable connection and accesseries etc complete all as directed. Make : Jaguar, Hindware, Cera
S&F over head shower with wall flange but without crutch and telephonic shower with suitable connection and accesseries etc complete all as directed. Make : Jaguar, Hindware, Cera
S&F two way bib cock with wall flange (QUEENS) complete as directed by Engr-in-Charge. Make : Jaguar Cat part No QQT-7041 or its equivalent
M&L for 12 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination & other side balancing white laminations complete all as specified and directed by Engineer-in-Charge.
M&L for Anodised powder coated aluminium section for partition with one or more rebates including joining cleat/rubber beading for fixing etc . complete all as specified
M&L for 5.5 mm thick sheet glass ,ordinary quality and glazing with oil putty / aluminium cleats etc in square exc 0.5 sqm in each pane all as specified and directed by engineer in charge.
S&F for powder coated Anodised aluminium door shutters ,aluminium section wt 0.55 kg/RM including necessary joining cleats glazing clips,rubber neoprene packing ,handles handles 2 Nos in each door,hinges,anodised aluminium snap beading screws and locking system with locks etc complete all as specified
S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm and Hangers 4 mm dia. G.I. (upto 3600mm length) adjusting level fixed to roof /roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as per specified and directed.
S&F in repairs PVC laminated designed (one side pavc lamination and other side aluminium paper) gypsum board 600 X 600 X 8mm thick decorative type fixed in aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminium ( Die cast ) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and all as specified and directed by Engineer in charge.
S&F 15 mm dia stop/ angle valve, chromium plated fancy type, cast copper alloy with capstain/ fancy type handle , screwed down , screwed both ends for iron pipe or for brass ferrule with wall flange. Make: Jaquar, cat part No- CON-059KN or its equivalent
Material and labour for concealed point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring in walls/PVC conduit on wall including Tee, Junction boxes and modular boxes and modular cover plates of suitable size including suitable screws with washer for mounting modular switchs, modular sockets and modular regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly including cutting and chassing of wall complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP
All as per item No. 134 above but for One Ceiling Fan / exhaust fan point controlled by one, one modular switch and modular regulator
All as per item No. 134 above but for One 3 pin 5 Amps modular switch socket outlet point controlled by one switch on independent board .
All as per item No. 134 above but for One 3 point 5 Amps modular switch socket outlet point controlled by one modular switch on the same board.
All as per item No. 134 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps modular switch socket combination point including running 4.0 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.
Supply and fixing of Modular Switch , flush type 5 Amps capacity 230 volts complete all as specified.
Supply and fixing of Modular socket 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified.
Supply and fixing Modular socket 2 in 1 multipurpose 5/15 amps flush type complete all as specified.
Supply and fixing of Modular electronic ceiling fan regulator 2M type heavy duty suitable to work on 230 volts complete all as specified.
Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.
Material and labour for Concealed Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring including cutting chassing of walls and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length. (For SPN DB)
Material and labour for Concealed Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring including cutting chassing of walls and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length. (For metal clad sockets)
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supply and fix LED energy efficient security light fitting of capacity of 35 W including suitable dia GI pipe bracket for fixing the light on wall all as specified and directed. NOTE : quoted rate included the suitble GI pipe bracket,nuts and bolts.
Supply and fixing lamp holder insulated body with back plate for angle batten fitting fixed with round block including LED bulb 9/10 W non dimmable type complete all as specified and directed
Supply and fix sheet metal enclosure with double pole and Earth Metal Plug & Socket including 20A SP MCB complete all as directed by Engr in Charge. .
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor all as specified and directed. Make:- Havells/Bajaj/Crompton
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed. Make:- Havells/Bajaj/Crompton
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc.all as specified and directed Make:- Havells/Bajaj/Crompton
Supply and fixing MCB double door DB SPN 8 way with 200 Amps busbar 240V all as specified and directed.
Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fix MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced , 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.)
M/S M.N.Reddy
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .