Kerala

Active

Works

Civil Works - Buildings

GENERAL-State Public Health Laboratory - Maintenance and Repairs to Biomedical room in the PH lab-Work-General Civil Work

Public Works Department

Thirunananthapuram | Thiruvananthapuram, Kerala

Amount: ₹2.1 LCloses: 24 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes24 Oct 2026
Bid Opening26 Oct 2026

Tender Value

₹2.1 L

EMD Value

₹5,175

Closing Date

24 Oct 2026, 11:00 am

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

O/o the Assistant Executive Engineer, PWD Buildings Sub division, PMG, Thiruvananthapuram.

Work Description

GENERAL-State Public Health Laboratory - Maintenance and Repairs to Biomedical room in the PH lab-Work-General Civil Work

Tender Information

Tender ID

2026_PWD_879476_1

Reference Number

PWD/BLDG/TR/11096/2026_5_1_1/1

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

90 days

Location

Thirunananthapuram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical/Finance

RequiredTender Schedule (.xls)

RequiredPreliminary Agreement and Affidavit (.pdf)

RequiredAttested copy of License (.pdf)

RequiredEMD exemption documents (If any) (.pdf)

RequiredDeclaration and e-payment form (.pdf)

RequiredForm of tender (.pdf)

RequiredIntegrity pact (.pdf)

RequiredStandard Bid Document (.pdf)

RequiredG S T Document (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹5,175

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

26 Oct 2026

Download Starts

14 Oct 2026

Download Ends

24 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Maintenance work
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	69	sqm	-	-
1.002	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	1.06	cum	-	-
1.003	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	2.13	cum	-	-
1.004	50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	3.97	cum	-	-
1.005	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	65.52	sqm	-	-
1.006	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	65.52	sqm	-	-
1.007	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	65.52	sqm	-	-
1.008	OD83195/2026-2027:Labour engaged for various works	2	no	-	-
1.009	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	69	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

BOQ_1495209.xls

BOQ • 0.30 MB

viewsbd.pdf

Tender Documents • 1.64 MB

epayment.pdf

Tender Documents • 0.05 MB

PreliminaryAgreement.pdf

Tender Documents • 0.03 MB

declaration.pdf

Tender Documents • 0.00 MB

integrity_pact.pdf

Tender Documents • 0.05 MB

form_of_tender.pdf

Tender Documents • 0.18 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Maintenance work
1.001	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	69	sqm	-	-
1.002	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	1.06	cum	-	-
1.003	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	2.13	cum	-	-
1.004	50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	3.97	cum	-	-
1.005	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	65.52	sqm	-	-
1.006	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	65.52	sqm	-	-
1.007	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	65.52	sqm	-	-
1.008	OD83195/2026-2027:Labour engaged for various works	2	no	-	-
1.009	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	69	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Maintenance work

1.001

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

sqm

1.002

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

1.06

cum

1.003

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

2.13

cum

1.004

50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

3.97

cum

1.005

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

65.52

sqm

1.006

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

65.52

sqm

1.007

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

65.52

sqm

1.008

OD83195/2026-2027:Labour engaged for various works

1.009

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm