DEVELOPMENT OF GARDEN AT AKOTA T.P 02 F.P-280 IN WEST ZONE (ABOVE/BELOW)

Excavation for foundation upto 1.5M depth

including sorting out and stacking of useful

materials an`d disposing of the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil.(R&B

Excavation for foundation for depth from

1.5 m to 3.0 m including sorting out and stacking of

materials and disposing off the excavated stuff

Meter lead.(A) Loose or soft soil

(R&B SOR 2024-2025 IT. NO 04002A)

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of foundations 135.56

etc. in layers not exceeding 20cm. in depth Cumt

consolidating each disposited layer by

ramming and watering.(R&B SOR 2024-2025 IT

Filling in plinth with sand under floors including 476.93

ramming, consolidating and dressing complete

(R&B SOR2024-2025 IT NO

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone 3054.35

aggregates 40 mmnominal size) and curing Cumt

complete excluding cost of formwork in (A)

Foundation and Plinth(R&B SOR 2024-2025 IT NO

Providing and laying controlled cement concrete M

150 for COPPING AND curing complete excluding 3937.03

cost of formwork and reinforcement for reinforced Cumt

concrete work in (A) Foundations, footings, Base

of columns and Mass concrete (R&BSOR 2024-

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of CMT 32.80 4564.7

formwork and reinforcement for reinforced

concrete work in (R&B SOR 2024-2025 ITNO

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and placing

in position complete upto floor two level (R&B SOR

Brickwork using common burnt clay building bricks

having crushing strength not less than 35 Cu.M. 4172.37

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional(R&B SOR2024-2025 IT NO 06002BA)

P & L Brick work using common burnt clay building

brick having crushing strength not less than 35 Cu.M.

kg/sq. cm. up to floor two level in cement mortar .

1:6 (1 Cement : 6 fine sand) (B) Conventional (R&B

SOR2024-2025 IT NO06002BA,06006B ) hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and directions of Engineer in

(i) Half brick masonry in common brunt clay

building bricks having crushing strength not less Sq.M.

than 35 kg/Sq.Cm. in cement mortar 1:4 (1-- .

cement : 4-coarse sand) up floor two level (B)

Conventional (R&B SOR 2024-2025 IT NO

Providing formwork of ordinary timber planking so

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to SQMT 229.20 264.60

ceiling not exceeding 4M. and removal of the same

for in situ reinforced concrete and plain concrete

work in. (A) Foundations Footings Bases of

Columns etc. and Mass concret. (R&B SOR2024-

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level Sq.M. 178.61

consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat

of C.M. 1:1 (1-cement : 1-sand) etc. complete.(R&B

SOR 2024-2025 ITNO 17003A)

Providing 15mm thick cement plaster in single coat

on Rough (Similar)side of single or half brick walls Sq.M. 163.39

for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand)(R&B SOR2024-2025 IT NO

Distempeing (Two coats) with oil bound distemper

of approved brand and manufacture and of

required shade on wall surfaces to give an even Sq.M. 79.88

shade, over and including a priming coat

with distemper primer of approved brand and

manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign

matter and also including preparing the surface

even and sand papered smooth.(R&B SOR2024-

Finishing wall with water proofing cement paint of

on wall surfaces (Two coats) to give an approved Sq.M. 59.71

brand and manufacture and of required shape

even shade after thoroughly brushing the surface

to remove all dirt and remains of loose powered

materials.(R&B SOR2024-2025 IT NO18027 )

Providing and fixing M.S. grills of required pattern

to wooden frames of windows etc. with M.S. flats kg 150.82

at required spacings and frame alround, square or

round bars with round headed bolts and nuts or by

screws. (A) ornamental Grill.(R&B SOR 2024-2025

Providing and Laying of 75mm thick (m25) grade of

vibroshot blasted grass paver block( hollow paver

block) as per design given by engineer incharge

with 25mm thick sand bed layer watering Sq.M. 1017.00

compacting paving with compact bt mechenical

compacter etc. complete as per specification ( A.R)

material should be confirmed IS 15658-2006

manufactured must have ISI ( As Per approved rate

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of cement Sq.M. 42.00

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5

laid over and jointed with grey cement slurry

including rubbing and polishing etc. complete. (B)

30 mm thick(R&B SOR 2024-2025 IT NO 14012BA)

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including Sq.M. 60.00

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter.( R&B SOR2024-2025 IT NO

Providing & laying compacted machine crushed

black stone aggregate 250mm thick wet mix

macadam in two layers in the material with water

to OMC in mecanically mix (pug mill) carriage of

mix material by tipper to site laying,spreading and Cu.M. 102.00

compacting in sub base of compacting power

vibrater roller to achive the desired density

(mechanically laid with tractor dozer) etc.

complete as per technical specification MORTH

clause-406(Approved Rate R.A NO 22/23/24

Structural steel work ( Confirming to IS 4923-1997)

bolted or welded in builtup for all type sections, in

work, including cutting, hoisting, fixing in position

a priming coat of approved steel primer all

complete as per the

structural designs and directions of Engineer in

site(R&B SOR 2024-2025 ITNO.20054)

Providing and fixing precast concrete curb stone of

grey cement based concrete block 30 cm length,

cm height and 15 cm thick of M250 grade concrete

as per approved designed and including excavation

for fixing in proper line and levelled, filling the

joint with C.M. 1:3 (1 cement:3 fine sand etc.

complete ( APPROVED RATE)

Providing and laying cement concrete flooring

1:2:4 (1-cement

: 2-coarse sand : 4-graded stone aggregate 20mm SQMT 16.00

laid in one layer and finished with a floating coat of

cement. (A) 40mm thick.(R&B SOR 2024-2025

Providing and fixing window having extruded

aluminum Colour

anodized section frame main outer size 95mm x

1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member SQMT 2.20

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with

mm thick transparent bronze colour tinted float

powder coated aluminum fittings and fixtures and

silicon sealant glass fixing to frame as per details

etc.(R&B SOR 2024-2025 IT NO 11026)

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood

board and face veneer or plywood face panels,

anodised alluminium butt hinges with necessary

Non-decorative type and block board core

alluminium butt hinges in flush door shutters (2)

35 mm thick.(R&B SOR 2024-2025 IT NO 10011)

Providing wood work in frames of Doors, windows

story windows and othersimilar works wrought, CUDM 2.00

and fixed in position. (A) Indian Teak Wood

(R&B SOR 2024-2025 IT NO 10001A)

Providing and laying Ceramic tiles 6mm thick in

Skirting risers of step and dedo on 10 mm thich

cement plaster 1:3 (1- cement : 3-coarse sand ) SQMT 119.00

finishing with flush

pointing in white cement.

(R&B SOR 2024-2025 IT NO 14009AA)

Providing and fixing to wall, ceiling and floor

galvanised Mild

steel tubes (Medium grade) of the following

tube fitting and clamps including making good the

and floor.(C) 20mm

(R&B SOR 2024-2025 IT NO 23001BA)

Providing and fixing water closet squatting Pan

W.C. Pan) size 580mm (Earthwork, bed concrete,

and trap to be measured and paid for separately)

China.(I) Long pattern = White colour

Providing and fixing wsh down water closet

(European type,

W.C. Pan) with integral P or S trap including

jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1- NOS 2.00

(Seal and cover to be measured and paid for

vitreous China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for

squatting pan including jointing the trap with the

pan and soil NOS 6.00

pipe in cement Mortar 1:1 (1-Cement : 1-Fine

sand)(A) Vitreous China.

Providing and fixing washbasin with single hole for

with C.I. or M.S. brackets painted white including

and making good the same but excluding

fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm

white colour.(R&B SOR 2024-2025 IT NO 23018-

Providing and fixing C.P. brass waste for washbasin

or sink. (A) NOS 2.00

Providing and fixing 600mm x 450mm bevelled

edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or

plywood NOS 2.00

sheet and fixing to wooden pluge with C.P. brass

Providing and fixing screw down bib taps of

following size.(A)

Brass screw down bib tap

polished bright. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw

pressure with screws, shanks and back nuts. (i)

15mm dia. 720(R&B SOR 2024-2025 IT NO 23029A-

Providing and fixing Gun metal check or non-

return fullway NOS 4.00

wheel valve.(C) 25mm dia.

Providing and fixing chromium plated brass half

trun flush cock

of approved quality including fixing in pipe line etc.

Providing and fixing Urinal or approved quality

conecting the Urinal with waste pipe , tap etc.

complete.(A) NOS 2.00

White earthenware flat back or corner type size

Providing and fixing ball cock of approved.

quality as directed.(A) Copper Metal (i) 25mm dia.

Providing laying (to level or slopes) and jointing

concrete Light duty non- pressure pipes I.S. class

NP2 of the following internal diameter with collars RMT 100.00

prepared for collar joints including testing of joints

complete.(D) 300mm

Constructing brick masonry road gully chamber

775mm including 500mm x 450mm (C.I. horizontal NOS 8.00

frame and vertical grating complete.)

HDPE storage tank Supplying Rotationally moulded

HDPE storage Tank With ISI mark of approved mark

all taxe and trasportaion ( GWSSB SOR 13-14 ) Page

(a)Storage Tank with ISI Mark ( with outside Black

and inside lining) 3 NOS

Providing and fixing concealed center point to

floor CPVC (SDR 13.5) PIPE having National

Sanitation RMT 50.00

Foundation (NSF) seal for potable water of

nominal bore tube fittings and clamps including

the wall, ceiling and floor etc. complete. [B]

mm.(R&B SOR 2024-2025 IT NO 23056)

Providing and fixing concealed center point to

floor CPVC (SDR 13.5) PIPE having National

Sanitation RMT 50.00

Foundation (NSF) seal for potable water of

nominal bore tube fittings and clamps including

the wall, ceiling and floor etc. complete. [C]

mm.(R&B SOR 2024-2025 IT NO 23057)

PROVIDING AND FIXING 8 GAUGE THICK

WITH THE GAPPING OF 2"X2" FIXING WITH

FIXURES IN LINE AND LEVEL INCLUDING SQMT 120.00

TRASPORTATION AND OTHER TAXES AS

INSTURCTION OF ENGINEER INCHARGE

PROVIDING AND FIXING COLOURED ACP

ALUMINIUM SECTION FRAME OF 24 X 35MM SQMT 15.00

FRAME AT REQUIRED SPACING FIXED ON

WALL OR RCC SURFACE OR

FREESTANDING STRUCTURE

INCLUDING 3MM ALUBOND OR

EQUIVALENT MAKE

ALUMINIUM COMPOSITE PANELS (ACP)OF

COOUR FIXED ON THE FRAME IN TRUE

UPTO ANY HEIGHT FOR ANY DECORATIVE

PER ARCHITECTS DRAWINGS AND

INSTRUCTIONS AND

AS PER INSTRUCTIONS OF ENGINEER IN

Providing and fixing pre-cast Rubber Dye/Steel

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed/ vibrated mechanically and as per SQMT 475.00

approved design confiming to IS 15658:2006

imcluding 35mm sand layer for lavelling filling

the joint with sand in proper line and level as

per guildlines of IRC : SP 63-2018

etc.Vomplete.( R & B SOR 2024-2025 Item

I/We am/are willing to carry out the work at… ....................... % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above. Amount

of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct ………% below Add ………% Above

In words In words