Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹41.9 L+₹3,097 (0.07%)Rejected-Finance 34 B A HOUSE NO 253 3 SECTOR C KALERHARI CHURCH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹43.7 L+₹1.9 L (4.46%)Rejected-Finance 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L3 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
ADDITION/ALTERATION TO BUILDING NUMBER 141 INCLUDING CERTAIN SANCTIONED MINOR WORKS AT MIL STN NAHAN UNDER GE CHANDIGARH
2023_MES_631760_1
GE/CHD-66/2023-24
Open Tender
Civil Works
Item Rate
180 days
Nahan Under GE Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹95,000
Yes
29 Feb 2024
8 Dec 2023
6 Jan 2024
8 Dec 2023
4 Jan 2024
23 Dec 2023
9 Dec 2023 - 18 Dec 2023
Amount
Demolition of brickwork or stone/boulder masonary, built in cement mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.
Demolition of Reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work of any description incl cutting of reinforcement as required to facilitate demolition complete all as specified and directed.
Dismantling existing waterproofing treatment hessian cloth base, membrane or any type including removal of debris from the site and depositing where directed.
Taking down steel water tubing 15mm with all fittings from walls, ceiling and floors, complete all as specified and directed.
Taking down steel water tubing 20mm with all fittings from walls, ceiling and floors, complete all as specified and directed.
Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed
Dismantling water tank exc. 500 ltr and n. exc 1000 ltr complete all as specified and directed.
Demolition of Mud phuska, sand, tiles in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) throw outside as per Direction of Engr-In-Charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each, complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each, complete all as specified.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots all as specified.
Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL) complete all as specified.
Dismantling mild steel work of any description not otherwise provided for in any location and any position complete all as specified and directed.
M&L for plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in Plinth protection,75mm thick finished even and smooth, complete including necessary form work all as specified.
Forming contraction (dummy) joints 25 mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and as directed.
M&L Brick work with flyash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks, complete all as specified and directed.
M&L for plain cement concrete (1:4:8), type D-2, using 40 mm graded stone aggregate as in foundations, filling , mass concrete and sub base.
Earth filling under floors incl spreading, leveling, watering and well ramming in layers not exceeding 15 cm thick complete all specified and as directed.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all specified and as directed.
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all specified and as directed.
Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all specified and as directed.
Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all specified and as directed.
Excavating in trenches, (soft/loose soil) n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified.
Removal of excavated soil to a distance exc 250 metre and n.exc 500m depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.
Returning and filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick using soft/disintegrated rock all specified and as directed.
M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, the like, any thickness, above top of footing including attached pilaster and buttresses etc., complete all as specified and as directed.
M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.
M&L for RCC M-25 Design mix, using 20mm graded stone aggregate for concrete as in slabs, floors, roofs, landings, balconies, canopies and shelves etc., complete all as specified and directed.
M&L for RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in beams, cantilevers, bressummers, lintels beyond 1.5m span etc., complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including attached pilaster and buttresses etc., complete all as specified and as directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions of square or rectangular finished rough complete.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick, horizontal or sloping finished rough complete.
M&L for Formwork for sides & soffits of floor or roof beams including bressummers, lintels, cantilevers, shelves including soffits etc complete finished rough complete.
S&F for TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F for TMT bars 5mm dia and over upto and incl 10mm cut to length, bent to shape required including, cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers, binders etc complete all as specified and directed.
Material & labour for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded stone aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including ,complete all as specified.
M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 including, complete all as specified.
M&L Rendering 15 mm thick on brick work or concrete surfaces, in cement mortar 1:6, in patches complete all as specified and as directed.
M&L Rendering 5 mm thick cement plaster in CM (1:3) on ceiling surfaces, complete all as specified and directed.
Supply only liquid integral water proofing compound all as specified and as directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces in camouflaging pattern or in any other pattern , Complete all as specified and as directed.
Material & Labour for preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over and including a coat of primer complete all as specified.
Material & Labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash,complete all as specified.
M&L preparation of new steel and iron surfaces of any description, not otherwise described two coats of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified and as directed.
S&F 4mm sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples.
S&F in repairs 5mm thick bakelite sheet printed/wood grain finish/decorative choice fixed in aluminium panels complete all as specified and as directed by Engr-in-Charge
S&F in repairs aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete.
Dismantling boarding, any description, fixed in any position with nails , complete all as specified and as directed
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and as directed
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and as directed
Supply and fixing factory made UPVC Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)
Providing and fixing Powder coated aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be not less than 2mm thick, smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required complete all as specified and directed. Note:- panel fillings other than aluminium filling and necessary fittings shall be measured and paid for seperately under respective items.
M&L providing Pre-cast cement concrete block type B1 (1:2:4 )(20mm graded crushed stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar(1:4) , complete all as specified and directed
S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."
S&F in repair Chromium plated brass Jet spray with tube 1.5 mtr complete all as specified and directed.
S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F 5.00mm thick glass corner shelf one piece having stainless steel perimeter border all as specified and as directed.
Supply & fix in repairs CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair Sink mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm dia Angle cock chromium plated brass fancy type, screwed down , high pressure, scrwed both ends for iron pipe complete all as specified and directed.
S&F in repair cast iron Nahani trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (triple layered cylindrical vertical with closed top) hoisted and fixed in position all as specified
S&F in repairs 15mm dia bore pipe Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repairs towel (600 mm long) rack stainless steel with peg set all as specified and as directed.
S&F double action floor spring, hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet , foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repair vitreous china (white) counter top wash basin in square / round/rectangular shape of standard size complete all as specified and directed.
S & F in repair vitreous china floor mounted wash down one piece water closet pan white (inclusing seat cover ,fixing bolts, flush cistern 10 ltr capacity) complete all as specified and directed.
S & F 75MM PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as per specified and as directed
S & F 17-18mm thick HDHMR board, high density, water and termite, boer and fungus resistant, laminated one side fixed with screws to timber frame work as in cupboard shelves, shutters, bathroom doors, kitchen cabinets etc complete all as specified and directed.
S&F Continuous (piano) SS hinges used in cupboards, 30 mm wide, complete all as specified and directed.
S&F in repair SS 304 cutlery trays of size 370x485x100mm and 0.6mm thickness 4 modular kitchen concept including fixing with slider, rollers for front and back movement complete all as specified and directed. Make: HAFALE/Hettich/Godrej/Kaff/Harrison or equivalent as approved by GE.
S&F in repair SS 304 multipurpose tandem box drawer of size 400x500x200mm and 0.6mm thickness having space for deep and shallow storage for bottom cabinets including blum tandem runners fixing clips, Tandem runners cover cap, front fixing fascia bracket and mounting plate and all necessary fitting and fixture and front and back movement complete with and incl tray containers and utensils complete all as specified and directed. Make: HAFALE/Hettich/Godrej/Kaff/Harrison or equivalent as approved by GE.
M&L for preparation and cleaning surfaces of cement concrete incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 Kg/Sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer and finally applying two coats of bitumenous aluminum paint @ 0.20 kg per sqm over APP membrane, complete all specified and directed.
S&F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F double shed Virified Ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F Glazed ceramic coloured,,tiles 300x200x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for 18-20mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.
M&L Cement concrete type B -0, 1:2:4 type B-I (12.5 mm graded stone aggregate) 25 mm thick, complete all as specified and directed.
M&L Cement concrete in surface channels and drains in cement concrete 1:2:4 type B2 (40 mm graded stone aggregate) complete all as specified and directed.
Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; fascia gutter , framed balusters; walk ways; railings; and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along externalwall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface ofthe sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified.
S&F 100 mm Stainless steel, Butt hinges, e anodised and fixed, type C-21 complete all as specified and directed.
S&F 150 mm Stainless steel, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size, Stainless Steel, D type with back plate, handle and fixed with screws complete all as specified.
S&F 250mm long stainless steel, sliding door bolt, plate type, s , with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.
S&F in repair 75mm size 4 lever brass chromium plated handle door lock for built in ( shutters) complete all as specified and directed.
S & F Door strip (snake guard strip) minimum 18mm wide aluminium body and nylon brushes minimum 22mm wide alongwith screw fixing complete all as specified and directed.
S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative balls/caps on both ends of curtain rods with comp fittings complete all as specified and directed.
Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Supplying and laying CPVC pipes (SDR-11) of outer dia 20mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.
All as per item No 100 here-in-before but 25 mm dia complete all as specified and directed.
S&F 110MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110MM PVC SWR Bends any radius complete all as specified and directed.
M&L for Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, complete all as specified.
Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.
Sand filling under floors or in foundations including watering and consolidation
Material & labour for 60mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed by Engineer in Charge.
M&L providing for PCC 1:2:4 Type B-0 using 12.5mm aggrgate as in coping, apex stone, complete all as specified and directed.
M&L for two coats of cement base paint over and including a coat of cement primer on new wall surfaces including all necessary preparation and wetting and curing, complete all as specified.
M&L for Hard core of gauge n. exc. 63mm ,deposited,spread and levelled in layers not exc. 15 cm thick, watered and rammed/rolled to a true surface complete all as specified.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.
Taking down MCB DB/AC Box/Meter box of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.
Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.
M&L for point wiring using approved colour coding as per IS ( for Phase and neutral) with copper conductor 1.5 sqmm ( Cross sectional area) single core multistranded FRLS ,PVC insulated and unsheathed cable 1100 volts grade,conforming to IS drawn and including PVC concealed coduit with fittings ISI marked ,terminated in modular switch boxes incl 1.5 sqmm (cross sectional area ) single core ,multistranded ,FRLS PVC insulated and sheathed cable as earth continuity conductor connected to earth dolly for one light point control by one way switch complete all as specified and directed.Note: 1.colour code of wiring should be ( for phase ,red,neutral ,black & earth wire green) 2.Modular switch sockets fan regulators shall be measured and paid separately under respective items deemed to be included in the quoted rates.
- Ditto - all as per item No - 114 above but controlled by two way switch.
- Ditto - all as per item No - 114 above but for one ceiling fan/exhaust fan point.
- Ditto - all as per item No - 114 above but one call point controlled by one bell point.
- Ditto - all as per item No - 114 above but for one 3 pin 5 amp socket on same board all as directed.
- Ditto - all as per item No - 114 above but for one 3 pin 5 amp socket on indipendant board all as directed.
- Ditto - as per item No: 114 here in before but with 4 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor.
Taking out /dismantling unsv Sub main wiring and S & F Sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100 V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow , Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4 sq mm for earth continuityconductor complete all as directed by Enginer-in-charge .
All as per item No 121 here in before but 2 run of 4 sqmm and one run of 2.5 Sqmm earth contuinity conductor
All as per Item No-121 above but 2 single core 1.5 Sq mm,one single core 1.0 sq mm for earth continuity conductor complete all as directed by Enginer-in-charge .
S&F of Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.
S&F in replacement of Modular snap switch SP two way 5/6 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular bell push switch, SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.
S&F of Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.
S&F of Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.
S&F of Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified and directed.
S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.
Supply and fixing of Modular Indicator lamp, 1 Module size complete all as directed.
S&F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 12/8 module complete all as specified and directed.
All as per Item No-133 above but 6/4 module complete all as specified and directed.
All as per Item No-133 above but 3 module complete all as specified and directed.
All as per Item No-133 above but 2 module complete all as specified and directed.
S&F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed.
Supply and fix of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.
Supply and fixing Electric bell, AC,230 Volts single phase ding dong type complete all as specified and directed.
Supply and Fix MCB protected socket (Modular AC box) 4 module plasic box with 25A cap MCB SP complete all as directed and specified.
Supply and fixing of 25 watt LED batten with opal diffuser ,IP20, battery backup upto 4 hrs.Fitting should have inbuilt 2 No's of Li-on battery of 2600mA each.Housing of fixture should be of extruded aluminium Efficacy of fixture >100LPW,P>F>0.9,THD<30% complete all as specified and directed.
Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC,decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.
All as per item No: 144 here in before but SPN 12 way, 240 volts complete all as directed.
S&F of isolator DP 63 amp 230 Volt complete all as specified and directed.
S&F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC Surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.complete all as specified and as directed.
Supply and fixing of Indoor Decorative LED box type suitable for fixing ceiling/wall with aluminium base directly retro fit LED tube Light , 22 watt, , Color: Cool day light 4 ft white Operating Voltage: 140-270 volts complete with all accessories internally pre wired and including up with three core PVC copper flexible cable of size 23/0.0076 from ceiling rose to connector block complete all as specified and directed LED batten & LED tube rod shall be of same brand.
Supply and fixing of Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete incl necessary mounting pole of GI tubing light grade suitable dia of required length incl necessary form work , all fixing accessories,monkey menace protection using steel spikes & barbed wire etc and all electric connections and testing complete incl taking out unserviceable fittings all as specified and as directed.
Supply and fixing of decorative wall mounting chrome finish fixtures with frosted glass light fitting suitable for 2x 40 watt retrofit/non retrofit type holder (base B-22 or E-27) incl 02 Nos of Mini GLS lamp 40 watts with connector block, etc. complete with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.
Supply and fixing of decorative wall mounting chrome finish fixtures with frosted glass light fitting suitable for 1x 40 watt retrofit/non retrofit type holder (base B-22 or E-27) incl 01 Nos of Mini GLS lamp 40 watts with connector block, etc. complete with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.
Supply and fixing of LED surface mounting light fitting 18 watts with lamp consisting of prewired high efficiency electronic driver high translucent frosted diffuser glare free smooth high distribution and connected up with white flexible 2 core cable incl taking down Unsv fitting complete all as specified and directed.
M&L in replacement of fabrication of sheet metal enclouser to accommodate 01 Nos electric meter as per reqired size and 1.6 mm thick MS sheet, powder coated, bakelite sheet with side hung shutter including provision of locking arrangement and niche covered with 4 mm thick plain glass , including locking arrangement & open Wiring coverd with Flexible Pvc Pipe of suitable size complete all as specified and as directed.
Taking down and re fixing the existing water geyser/ Ceiling fan/exhaust fan any/type and any size after necessary servicing/greasing complete incl painting all as specified and directed by Engr-in-Charge to match with existing surface
Supply and fixing of wall mounting fan with remote, sweep size 400 mm, double string type and making all electric connections including fixing accessories complete all as specified and directed.
Supply and fix of Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m and making all electric connections complete all as specified and directed.
Supply and fixing of Exhaust fan 300 mm sweep heavy duty complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230/240 Volts single phase, 50 Hz,1400 RPM , AC supply with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm and making all necessary connection and fixed by using 04 Nos 100 mm long 10 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 (including opening of wall etc) completed all as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ® with provision of cable PVC insulated and sheathed FRLS grade 3 core 1.0 sqmm copper conductor flexible wire 1100 volts grade from porcelain connector /ceiling rose to ceiling fan complete all as specified and directed.
Supply and fixing of Water heater (Geyser) Storage type , vertical type 5 star rating electric 230 volts AC,50 Hz capacity 25 ltrs with 15 Amps plug top fixed on wall by means of anchor fastners-04 Nos ,12mm dia and 150mm long grouted into wall and making good the disturbed surfaces with existing finishes complete all as specified and directed.Note: The UNSV old one Item Srl No 156 to 160 is MES property and will be handed over to MES Store Yard .
Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.
M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge
M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover.
Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 part-1 of size 63 mm outer dia and 50 mm inner dia all as directed.
Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 25 Sqm 2 core size including taking out unserviceable complete all as specified and directed. Note:- (i) Excavation and earth work cable protection and sand cushioning shall be measured and paid seperately .
Supply and laying of GI tubing, medium grade, 40 mm bore dia as cable protection fixed on walls/poles/laid in trenches complete including dismantling corroded GI pipe all as specified and as directed.
Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.
NAVREET CONSTRUCTION
Bairagi Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .