Construction of MT Shed in GERI Racecourse campus behind CNC building, Vadodara

Name Of Work :-

building, Vadodara

Qty Unit Item Description of Item

0.18 ha 1 Clearing and grubbing road land including uprooting rank 28455.10

vegetation grass bushes,shrubs,sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

632.70 Cum 2 Excavation for foundation upto 1.5 m depth including 120.01

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

333.00 Cum 3 Excavation for foundation for depth from 1.5 m to 3.0 m 166.44

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B)Dense or Hard soil

177.60 Cum 4 Excavation for foundation for depth from 3.0 m to 5.0 m 180.38

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

99.90 Cum 5 Filling available excavated earth (excluding rock) in 133.66

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering

227.79 M3 6 Filling in foundation and plinth with brick Bats Chhara in 615.58

layers . thickness including watering, remming and

consolidating etc. complete.

599.36 M3 7 Filling in foundation and plinth with murrum or selected soil 296.30

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

106.66 M3 8 Providing and Laying ordinary cement concrete 1:2:4 (1 7475.61

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (ii) Slabs having more than

8 cm and upto 10 cm.thickness

177.11 Cu.mt 9 Providing and laying controlled cement concrete M.250 and 4247.57

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in

(A)Foundations, footings, Base of columns and Mass

27.94 Cu.mt 10 Providing and laying controlled cement concrete M.250 and 4628.15

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level.

113.30 Cu.mt 11 Providing and laying controlled cement concrete M.250 and 4526.88

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (C)

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders

and Cantilever upto floor two level

Qty Unit Item Description of Item

55.76 Sq.mt 12 Providing formwork of ordinary timber planking so as to give 276.69

a rough finish including centering shuttering strutting and

propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete

work in. (A) Foundations Footings Bases of Columns etc.

and Mass concrete.

211.14 Sq.mt 13 Providing formwork of ordinary timber planking so as to give 410.40

a rough finish including centering shuttering strutting and

propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete

work in. (G) Columns PillarsPosts and struts. (1) Square

Rectangular Polygonal in plan

86.68 Sq.mt 14 Providing formwork of ordinary timber planking so as to give 299.52

a rough finish including centering shuttering strutting and

propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain

concrete work in. (H) (1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and Lintels not

exceeding 1 M. in Depth

10493.33 KG 15 Providing TMT Bar FE 500D reinforcement for R.C.C. work 77.29

including bending, binding and placing in position complete

upto floor two level

44.82 M3 16 Brick work using common burnt clay building bricks having 4769.79

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(A) Modular

302.06 sqm 17 20mm thick sand faced cement plaster on walls upto height 337.53

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

346.93 sqm 18 Providing 15mm thick cement plaster in single coat on 241.82

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smoothi

in (i) Cement mortar 1:3 (1-cement:3-sand)

648.99 sqm 19 Applying two coats of putty & two coats of primer of 40.60

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

346.93 sqm 20 Wall painting (Two coats) with plastic emulsion paint of 97.46

approved brand and manufacture on wall / ceiling / sloping

roof surface to give an even shade including thoroughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Qty Unit Item Description of Item

302.06 sqm 21 Finishing wall with weather proof exterior emulsion paint on 117.41

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

17.00 Rmt 22 Providing, laying and jointing in true line and level 110 856.03

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including

cost of all materials.

1.00 Each 23 Constructing brick masonry chamber for underground C.I. 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

8408.39 KG 24 Structural steel work ( Confirming to IS 4923-1997) riveted, 131.15

bolted or welded in builtup for all type sections, in framed

work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer all complete

as per the structural designs and directions of Engineer in

497.43 M2 25 Painting two coats (excluding priming coat) on new steel and 90.01

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and

other foreign matter.

359.01 M2 26 Providing corrugated PPGI 0.50mm thick double coated 1051.41

Trafford sheet roofing fixed with galvanized iron J or L

hooks, bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer filled with white lead complete excluding the

cost of purlins, Rafters and Trusses (1) 0.50 mm thick sheet.

116.40 kg 27 Providing laying 150 x 100 Alluminium section any size, 601.10

powder coated drain including fixures fastning, clamping and

conection with 110 mm dia PVC pipe.

30.00 Rmt 28 Providing and erecting XLPE(IS:7098)(I)-88ISI 676.70

armouredcablemultistrand Copper conductor for 1.1KV. tobe

laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm

Qty Unit Item Description of Item

68.00 Nos 29 Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. 354.51

mm & earth wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in below type of pipe

erected with 6A Tissino Type ISI marked flush type switch /

bell push and accessories erected on Metal / PVC/Wooden

Box covered with 3 mm thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

129.95 Rmt 30 Providing and erecting Mains with 1.1 KV grade FRLS PVC 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

20.00 Each 31 Providing and erecting Approved make Ceiling fan with 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

40.00 Each 32 Supplying and erecting LED indoor fittings with LEDs of 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED,LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-

80.50 Rmt 33 providing and erecting Mains with 1.1 KV grade FRLS PVC 180.79

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(g) 4 wire 4 sq. mm

3.00 Each 34 Supplying & erecting Sheet Steel powder coated Cable end 496.92

termination Box to be mounted on Top or Bottom of the

MCB Distribution Box for housing/covering Extra wires &

Cables, suitable for following size of MCB DB Box.

(E) Three Phase 4 Way

Qty Unit Item Description of Item

3.00 Each 35 Providing following type of Modular Type Accessories 151.50

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge.

(2) One No 5 pin plug Cat lll

5.00 Each 36 Providing and erecting Sheet Steel powder coated MCB 2339.16

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

1.00 Each 37 Providing and erecting Approved make Four pole moulded 6173.12

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

2.00 Each 38 Supplying & erecting earth pit of minimum bore dia.150mm 5760.03

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag

5.04 Sqmt 39 Providing and fixing 35 mm thick shutters for Doors, 3748.09

windows and clearstory windows including blackenamelled

M.S. butt hinges with necessary screws. (A) Indian teak

wood. (i) Fully Panelled.

Qty Unit Item Description of Item

324.00 KG 40 Providing and fixing M.S.grill of required pattern to wooden 105.19

frames of windows etc, with m.s.flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill

25.90 Sqmt 41 Providing and fixing rolling shutters of approved make made 1583.96

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket

plates, guide channels and arragements for inside and

outside locking with push-pull operation including the cost of

hood cover and spring etc. complete. (B) Shutters having

width 3.5 M. and above

200.00 MT 42 Disposal of the Construction Waste 569.20

280.90 Sqmt 43 Providing and laying polished Kota stone slab flooring over 1001.15

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

9.71 Sqmt 44 Providing and laying polished kota stone slab 25mm thick in 1149.53

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

34.00 Sqmt 45 Providing and fixing hard drawn steel wire fabric 75mm x 777.78

25mm mesh or weight not less than 7.75 kg. per Sq.M. to

window frames etc. including 60 x 20mm beading of teak

16.20 Sqmt 46 Providing and fixing window having extruded aluminum 2176.28

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass in two track and fly proof galvanised MS

wire gauge in one track with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

14.21 Sqmt 47 Providing and fixing mirror polished 18 mm thick Selected 2373.50

colour Granite stone with full round edge and polished of

approved quality in clading on sill and around the doors/

windows/ ventilation with 12 mm thick cement mortor CM

(1:4) and fixing with cement slurry & adhesive including

moulding of exposed edges as directed by engineering in

charge etc. complete.

Qty Unit Item Description of Item

10.00 Each 48 Supply, installation, testing and commissioning of 600 mm 5494.40

diameter turbo air ventilator (exhaust fan) made of high-

quality aluminium/PPGI compatible material with SS shaft,

heavy-duty bearings, base plate, and bird screen, complete,

including fixing, fastening, sealing and waterproofing, as

4.00 Each 49 Supplying & erecting carbondioxide(CO2) fire extinguisher 8671.86

user of following capacity with necessary clamps made from

50x6mm M.S. Flat with nut & bolts grouted in wall complete.

B] For 5.5 / 6.5 KG Capacity

79.80 Sq. Mt. 50 Providing and fixing pre-cast Rubber Dye / steel Dye 1119.39

interlocking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS

15658 : 2006 including 30 cm excavation, 20 cm compacted

filling, 10 cm M10 PCC and 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

79.80 RMt. 51 Providing and fixing pre-cast concrete kerb stone of gray 394.59

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Rs. Sixty Six Lakh Ninety Two Thousand Three Hundred Thirty Only

I/We am/are willing to carry out the work at… % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to Estimated amount put to

Deduct………% below Add………% Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R. NO.:

MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual

mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Deputy Executive Engineer Nodal Officer and Executive Engineer

Dam Safety Organisation Dam Safety Organisation

GERI, Vadodara GERI, Vadodara