REPAIR TO PLASTER SANITARY FITTINGS INTERNAL WATER SUPPLY RAILING STAIR CASE PLASTER AND OTHER MISC WORKS IN CERTAIN OTM ACCN INS DRONACHARYA MES COLONY AT FORT KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premises, complete all as specified and directed.

M&L PCC 40 mm thick, type B-1, 1:2:4, using 20 mm graded stone aggreage as in levelling the undulated floor area complete all as specified and directed.

Material and labour for Screed bed or bedding layer of mortar 1:4, 15mm thick for laying floor finishes complete all as specified and directed.

M&L rendering cement plaster 10 mm thick in CM 1:3 on brick or concrete surfaces , finished fair and even for receiving wall tiles complete all as specified and directed.

M&L Joint free non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified and directed.

M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.

S&F stainless steel grills and railings fixed to walls and floors of Grade-316 including all pieces, drilling holes, sweling, buffing, complete all as specified and as directed.

S&F in repair 32 mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connnections including necessary packing,union and cap and fixed complete all as specified and directed.

S&F in repair 20 mm dia curtain rods, anodised aluminium alloy fixing with brackets complete all as specified & directed by Engineer-in-charge.

S&F in repair 30 mm dia stainless Steel fancy type(powder coated) curtain rods with decorative single knob and brackets on either sides in doors/windows as per sample complete all as specified and directed.

S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore complete all as specified and directed.

S&F in repair 15 mm concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair waste coupling brass, (40mm) chromium plated suitable for steel sink including strainer etc.complete all as specified and directed.

S&F in repair 75mm long hinges, (any type ISI marked) medium weight cold rolled mild steel fixed with aluminium beading,screws or welding fixed in repair including taking down shutter and refixing in same position complete all as specified and directed.

-Ditto-all as per item No 16 here in before but 100mm long

-Ditto-all as per item No 16 here in before but 125mm long

M&L for preparation of old treated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old treated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Sheet glass ordinary quality & glazing with aluminium beading and clip in square n-exc. 0.5 sqm in each pane 3 mm thick including hacking down complete all as specified and directed.

S&F Sheet glass ordinary quality & glazing with aluminium beading and clip in square exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified and directed.

Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in two coats (10 mm thick in cement mortar 1:6 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note- water proofing compound shall be measured and paid seperately) .

Material and labour for 10mm thick rendering cement plaster in cement and sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of exterior primer (Proffesional pack of Asian paints) over a coat of external wall care piutty n.exc 2 mm thick on new or old prepared plastered external surfaces and including scaffoldings and cradles including hoisting and lowering as required with bracing , support complete all as specified and directed.

Supply only liquid water proofing admixture all as specified.

Supply and fixed in repairs for vitreous china squatting pan, ‘Orissa’ pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern) including provision of PCC or lime concrete bedding and 32mm dia flush pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges complete all as specified and directed.

Supply and fixing in repair for vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs for 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing in repair for PVC connections 600mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing single towel rail 600mm long, cast copper alloy chromium plated fixed as in repair complete all as specified and directed.

S&F in repairs door closer aluminium (extuded section) body hydraulically regulated designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs toilet paper holder SS fixed in repairs complete all as specified and directed.

S&F in repairs Stainless steel soap dish fixed with SS screws complete all as specified and directed.

Supply and fixing 75mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor in repair complete all as specified & directed by Engineer-in-charge.

S & F in repair CP grating 75 mm dia with /without hole complete all as specified & directed by Engineer-in-charge.

Material and labour for plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.

S&Fin repair aluminium wiremesh fix to wood/aluminium frames including taking out old damaged aluminium wire cloth complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down old unserviceable aluminium windows/doors with frame exceeding 1.5 Sqm but not exceeding 4 Sqm and grills complete all as specified and directed.

Taking down old unserviceable aluminium ventilator/windows with frame not exc 1.5 Sqm and grills complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.

Supply and fixing for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 180 of SSR-2020 (Part II) complte all as directed by Engineer-in-Charge.

Supply and fixing in repair for aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and fixing for extruded aluminium alloy handles (ISI Marked), fabricated type, anodised and fixed size of handle 150mm, complete all as specified and directed.

Supply and fixing for aluminium, anodized barrel tower bolts (ISI Marked) of extruded section and fixed, 200mm long, dia of bolt not less than 10 mm,complete all as specified and directed.

Supply and fixing 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed by Engineer-in-charge.

Attending day to day internal water supply complaints of OTM accomodation of INS Dronacharya and rectify the complaints to the entire satisfaction of Engineer in charge. Note:- (i) The quoted rate shall be deemed to be included for the cost of minor items like teflon tape, washers, coupling,union,socket, bend, elbow etc suitable for following sizes of pipe and taking down old items etc. (ii) The materials required for renewal shall be measured and paid seperately under respective item. (iii) Emergency complaints will be attended on sundays/holidays also. (iv) Minimum one pipe fitter and one mate shall be detailed for one set of complaints, with all required tools in neat tool bag. (v) The trademen shall wear uniforms with safety shoes incl all necessary safety gear. (vi) Complaints/job cards shall be collected from complaint cell and trade men should submit the feedback of complaints the same day.

Supply only half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle, screwed for iron pipe long body, complete all as specified and directed (Minimum weight 15mm- 400 gms)

Supply only half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe short body, complete all as specified and directed (Minimum weight 15mm- 400 gms)

Supply only for bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms),complete all as specified and directed.

Supply only 15mm dia stop valves cast copper alloy with crutch or butterfly handle (Minimum weight 15mm- 330 gms) complete all as specified and directed.

Supply only 20mm dia stop valves cast copper alloy with crutch or butterfly handle (Minimum weight 20mm- 675 gms) complete all as specified and directed.

Supply only half/quarter turn 15 mm Stop valves, cast copper alloy, chromium plated fancy type with crutch or butterfly handle (Minimum weight 15mm-330gms) complete all as specified and directed.

Supply only half/quarter turn 20 mm Stop valves, cast copper alloy,chromium plated fancy type with crutch or butterfly handlec(Minimum weight 20mm-675gms) complete all as specified and directed.

Supply only half/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe complete all as specified and directed.

Supply only health faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings upto 11 floors in all respect, complete all as specified and directed.

S&F in repair 15mm dia cast copper alloy, chromium plated mixer tap for mixing hot & cold water, screwed down, complete all as specified and directed.

Supply and fixing for 125 mm shower rose chromium plated with swivel joints suitable for fixing to 15 mm GI/UPVC/CPVC pipe or union including taking down old shower, complete all as specified and directed.

Taking down old unserviceable pipe PP-R any type/size from wall complete including all connecting accessories complete all as specified and directed.

Supply and fixing for 20 mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Supply and fix 25 mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Taking down old unserviceable pipe GI/PVC/CPVC/UPVC from wall complete including all connecting accessories complete all as specified and directed.

Supply and fixing for galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor upto 4th floor complete, all as specified and directed.

Supply and fixing for galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor upto 4th floor complete, all as specified and directed.

Supply and fixing for galvanised iron water tubing 25mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor upto 4th floor complete, all as specified and directed.

Supply and fixing for galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor in multi storey buildings 5th to10th storey complete, all as specified and directed.

Supply and fixing for galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor in multi storey buildings 5th to10th storey complete, all as specified and directed.

Supply and fixing for galvanised iron water tubing 25mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor in multi storey buildings 5th to10th storey complete, all as specified and directed.

Supply and fixing for 15 mm unplasticised PVC pipes of pressure rating 10kgf\cm2 fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Supply and fixing for 20 mm unplasticised PVC pipes of pressure rating 10kgf\cm2 fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Supply and fixing for 25 mm unplasticised PVC pipes of pressure rating 10kgf\cm2 fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Supply and fix in repair for ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 15mm dia and fixed complete all as specified & directed.

Supply and fix in repair for ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 20mm dia and fixed complete all as specified & directed.

Supply and fix in repair for ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 25mm dia and fixed complete all as specified & directed.

S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey , complete all as specified and directed.

S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11 fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey , complete all as specified and directed.

S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey including taking down old pipe, complete all as specified and directed.

S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey,complete all as specified and directed.

Dismantling water tanks exc 250 and not exc 500 ltr cap and removing to store complete all as specified and directed.

Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing to store complete all as specified and directed.

Dismantling water tanks exc 1000 and not exc 2000 ltr cap and removing to store complete all as specified and directed.

Supply and fixing for in repair 500 litres capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete all as specified and directed.

Supply and fixing for in repair 1000 litres capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete all as specified and directed.

Supply and fixing for in repair 2000 litres capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete all as specified and directed.

S & F mild section, angle iron, plates etc as in bottom support of PVC retangular tank , complete all as specified and directed.

M&L for brass spindle suitable for bib tapes /stop valves/mixer of size 15/20mm as sper site requirement , complete all as specified and directed.

Supply and fix Aluminium windows casement type (34 mm Series) powder coated aluminium sections with and including 5 mm thick plain sheet glass/frosted glass panes of openable type with rubber lining, Casement type (34 mm Series) sections for mosquito proofing windows with aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm in three panes divided with mullion section sash bars and aluminium standard decco grills 10 mm thick, fixed in with 1.3 mm thick standard aluminium "F" channels etc complete with following sections of HINDALCO or equivalent all as specified. (a) "H" frame 44.50 x 34.00 x 2.00 mm Section No 2082 (b) "Z" shutter 34.00 x 44.50 x 2.00 mm Section No 4124 (c) Mullion 57.00 x 34.00 x 25.00 mm Section No 9139 Note:- The rates are inclussive of SS friction hinges grade 304(Eye Max) for aluminium windows , jointing cleats, rubber beading, "U" channels, handles, locking arrangements etc. complete all as specified and directed.

M/s.Rejoy Constructions

LAKSHMI BUILDERS

K.V.GEORGE AND COMPANY