SPECIAL REPAIR TO JCOs MD ACCN OF BLDG NO P 8D PROVN OF SECURITY LIGHTS WITH POLE AT BLDG NO 127 TO 131 AND BLDG NO 06 PEANOCK FORM OLD TENNIS COURT AT CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.complete all as directed.

M & L for screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes Complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm (size 400 X 400 x 7 mm thick), as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm (size 400 X 400 x 7 mm thick), as in dado/skirting/on verticle surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile,complete all as specified and as directed.

M&L for rendering/screed bed 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of dado/ skirting & vertical surface Complete all as specified and directed.

M & L for glazed ceramic coloured / printed tiles 300mm x 450mm, 6 to 7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, complete all as specified and as directed.

S&F 8mm thick, wooden pieces, machine presured one side laminated and other side balancing green, as in parquet flooring with and including necessary padding as soft wool graded type as required at site, fixed with adhesive as per manufacturer's instructions including taking down old wooden flooring with or without plywood complete all as specified and directed.

M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed as in repairs complete all as specified and directed.

M&L for 9mm thick plywood, graded BWR, type BB fixed with rawl plug and screws to timber framework fixed complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) Complete all as specified and directed.

M&L for 100mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggegate ) as in sub base of floor complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement includig mixing of water proofing compound of approved make @ 3% by weight of cement or as per manufacturer instructions complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately

M & L for 15mm thick rendering in cement mortar 1:6, surface finished even & smooth with thin layer of sagol over a dubbing out average 10mm thick on irregular face of walls, complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface with Birla putty preparatory to distempering) complete all as specified and directed.

M&L for preparing newly and old plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer (Priming the plastered and other surface with alkali resistant priming paint) complete all as specified and directed. Note- Old painted surface shall be completely removed by brushing, washing etc by the contractor at his own cost

M & L for complete removal of existing treatment for preparing old painted surfacess and applying two coat of distemper oil emulsion over a coat of primer(Priming the plastered and other surface with Birla putty preparatory to distempering) complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Demolition brick work or stone/ boulder or pre-cast PCC block masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4, finished even & smooth without using extra cement complete all as specified and directed.

S & F in repairs 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

S & F in repairs 100mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

S & F in repairs butt hinges, medium weight, stainless steel and fixed, size of hinges 75mm complete all as specified and directed.

S & F in repairs butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed.

S & F in repairs 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S & F in repairs 100mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

S & F 300 mm long (Length of bolt) mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate complete all specified and directed.

S & F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane fixed with oil putty complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in stone concrete block or wall complete all as specified and directed.

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all GI fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old retrieved 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all GI fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Refixing of old retrieved 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, fancy type chromium plated with long shank & cup (concealed) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe complete all as specified and directed.

S & F in repairs 15mm bore pillar tap fancy type, cast copper alloy with capstan head, chromium plated screwed down, high pressure with or without lettered “hot “ or “cold” with long screwed shanks and fly nut complete all as specified and directed.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only 15 mm Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs bib taps, cast copper alloy, 15 mm dia, Chromium plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified.

S&F in repairs PVC low level flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets, connection to pipe complete all as specified and directed.

S&F 600mmx450mm looking mirror PVC moulded and fixed to wooden plug with CP brass screws and cup washers complete all as specified and directed.

M & L for 32mm bore high density polyethylene pipes (HDPE) complete all as specified and directed.

M&L for 75mm dia PVC nahani trap or floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

Dismaintling of 75mm to 110mm bore PVC (SWR) pipe jointed in cement mortar and taking out of trenches or of any description/ fixed in wall and any position as required complete all as specified and directed.

S & F 110mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm dia PVC cowls complete all as specified and directed.

S & F PVC (SWR) branch Piece single ( Double Y ) equal or unequal dia 110mm complete all as specified and directed.

S & F 75 mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm dia PVC cowls complete all as specified and directed.

S & F PVC (SWR) multi floor trap 75mm with grating including jointing with solvant cement complete all as specified and directed.

S&F chromium plated Soap dish fixed to plug with chormium plated brass screws complete all as specified and directed.

S & F 20mm dia Aluminium alloy anodised curtain rod decorative fancy type with brackets complete all as specified and directed.

S & F PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified and directed.

Dismatling & Disconnecting existing PVC tank exc 250 Ltr and n. exc 500 ltr capacity complete all as specified and directed.

S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position complete all as specified and directed.

S and F Ball brass valve 20 mm dia high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantling of boarding , any description fixed in any position complete all as specified and directed.

S & F Secand class hardwood 40 mm boarding plain one side with butt joint fixed with nails in any situation complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in framed work complete all as specified and directed .

M&L for timber framed and fixed second class hard wood clean sawn as in scantlings complete all as specified and directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws & fixed with L type or J- type or crannked hooks bolts in lieu of screw complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws & fixed with L type or J- type or crannked hooks bolts in lieu of screw complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and directed.

Dismantling of CI or reinforced concrete drain pipes,150 mm dia jointed in cement mortor and taking out of trenches complete all as specified and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes grade 'A' laid in trenches and jointed as specified complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed.

Returning, fillingin, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soils complete all as specified and directed.

Removing surplus excavated soil to a distance exceeding 250m but not exceeding 1.50KM and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided including reinforcement cut as requried to facilitate demolition complete all as specified and directed.

M & L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in precast cover slab for main holes, drains, channels etc set in cement mortar 1:4 including necessary from work complete all as specified and directed. Note: Reinforcement shall be measured and paid separately

M & L for form work to rough finished surface of concrete as in soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed

S & F TMT bars 6mm to 8mm dia as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply only intergral water proofing compound complete all as specified and directed.

BOQ ( Sch A ) E/M Works Taking down carefully Aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone/ PCC block masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size multi stranded copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (a) One light/one fan/one bell point controlled by one, one way switch.

All as per item No 86 above but one light point controlled by two Nos of two way switch.

All as per item No 86 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 86 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No 86 above but wiring with using cable 2.50 sqmm size multi stranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size multi stranded copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F switch piano flush type single pole, Two way 6 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SP, 240 volts,AC, C curve, 10 KA 6 to 32 Amps complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SPN , 240 volts,AC, B curve, 10 KA 40 Amps complete all as specified & directed.

Taking down unservicable MCB and S&F MCB DP , 240 volts,AC, C curve, 10 KA 40 Amps complete all as specified & directed.

Taking down unserviceable MCB S & F MCB TPN , 415 volts, AC, C curve, 10 KA 100 Amps complete all as specified & directed.

Supply and fixing LED street light fitting 35 Watt 230 V, AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed .

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 12 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F sheet metal enclusure for DBs(double door type) Triple pole and neutral 4way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed .

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

Taking out old U/S Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 4.0 Sqmm stranded copper conductor PVC complete all as specified and directed (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in hard/dense soil or soft/disintegrated rock, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate), GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed NOTE:- i) Earth lead beyond 7.5 m from electrode to earth terminal point/main switch board & GI pipe light grade 15 mm dia for protection against mechanical damage to lead shall be measured separately. ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor.

S & F call bell ding dong AC, 230V single pole fixed over with and including sunk pressed steel box of size 175mmx100mm with 3mm thick plastic laminated backalite sheet cover fixed with brass screw complete all as specified and directed,

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

S& F LED Bulb of 9 watt complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed

Taking down storage type water heater (geyser) of any type /make up to 50 Ltr capacity after disconnecting electric / water connections and refixing the same after carrying out necessary repairs including reconnecting the electric / water connections and testing complete all as specified and diected.

S & F exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

S&F exhaust fan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L for sand cushioning in trenches including spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified and directed Note: The punned thickness of sand shall be measured and paid

M&L for laying of bricks well burnt sub class ‘B’ (old size) laid flat for cable protection width equal to the lengrth of brick complete all as specified and directed

M & L for galvanised steel water tubing 'light grade' 40 mm bore with all GI fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed .

Supply, laying, jointing and commissioning LT XLPE 1100 volts 6 sqmm 2 core grade heavy duty under ground cable PVC insulated,strandred aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing laid in trenches, floor through pipes, in duct on pole and roads etc complete all as specified and directed .

M&L for GI pipe 25mm bore light grade with all fittings as in protection pipe for cable complete all as specified and directed .

S & F Non Transparent SMC Kiosks box with 1 No. 10 A, MCB for controlling of street light of standerd size with clamp complete all as specified and directed.

Supply and errecting of steel tubular pole, swaged, over all length 8.5 mtr, type 410-SP-22 complete with MS base plate, pole cap MS bolts, nuts & washers including two coats of aluminium paint over a coat of red oxide primer and marking/sign writing of numbers and feeder locations of poles on external exposed surfaces with and including the following complete all as specified and directed:- (a) Excavation in post holes in any type of soil, returning, fillingin, well ramming and disposal of surplus soil to a distanece not exc 50 mtr from the starting point. (b) PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation including form work complete (c ) PCC ( 1:2:4) type B-1 using 20mm graded stone aggregate as in coping including form work complete (d) PCC ( 1: 4:8 ) type D-2 using 40mm graded stone aggregate as in base

M/S S R Construction

aditya construction

Bajetha Construction