SPECIAL REPAIR OF SEWAGE LINE FROM OLD TRANSIT FACILITY TO APJ ABDUL KALAM TRANSIT FACILTY, ADDITION/ALTERATION IN CERTAIN ROOMS IN SAG ANALYSIS WING METCALFE HOUSE, PROVISION OF SUMMER APPLIANCES FOR DSC POSTS UNDER TIMARPUR SECURITY (TSU) AT TIMAR

Amount

Taking down cement plaster/grit plaster/rough cast plaster on brick or stone walls incl raking out joints hacking for key scrubbing down with water etc complete all as specified.

M&L for rendring 15 mm thick plaster in cement mortar 1:6 rendering to be done and fair complete all as specified and directed

Complete removal of existing treatment from internal / external plastered or unplastered surfaces of walls complete all as specified and directed

M&L for 2mm thick layer(Each coat min 1mm thick) of white putty on scrapped/uneven surfaces of any description to match with the existing surfaces complete all as specified and directed

M&L for preparation of new plastered/untreated surface of walls and applying two coats of oil bound distemper complete all as specified and as directed

Dismanting of floor, hearth or wall tiling incl cement mortar bedding /backing removing rubbish off the premises complete all as specified and directed.

M&L for non skid coloured tiles 400mm X 400mm X 7mm thick as in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces of size 450X300X7 to 8 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for fully vitrified ceramic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for fully vitrified ceramic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in skirting/dado etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed

Taking down chowkath or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and making good the disturbed surface complete all as specified and directed.

Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any descriptions exc 1 and not exc 2 sqm each complete all as specified and directed

S&F Mild Steel framed work such as grills, gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; wall ways; railings; framework of water tanks and similar work con-forming to Fe.290. Gde-E-165 complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of steel surface of any descripition not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F aluminum alloy door closer hydraulically regulated, desination No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed to door frame complete all as specified and directed.

S&F in repair manually opening and closing roller type blinds of approved make with characteristic composition of fabric of polyster and nylone complete all as per manufactuer complete all as specified and directed.

M&L for 40 mm thick flush shutters ,solid core construction with block board core and plywood face panel complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply & fixing mild steel butt hinges 100 mm long medium weight etc complete all as specified and directed.

Supply & fix aluminium anodised extruded fabricated type handle 150mm long etc complete all as specified and directed.

Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections etc complete all as specified and directed.

Supply and fixed 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle of any size fixed with beads or putty (in metal/wooden frames etc) complete all as specified and directed.

M/L Powder coated aluminum windows made out of aluminum tubular frame of section 63.5 x 38.10 x 1.6 mm thick and shutter fixed ,sliding or openable horizontal and vertical members of alum anodized section 47.50 x 44.45 x1.6 mm thick, aluminum beading, rubber gasket and complete aluminum fittings such as hinges tower bolt, stay rod and handle ( sheet glass shall be measured and paid separately) Note :- Design and pattern of aluminum windows shall be got approved by GE.

Dismantling of wall and ceiling board with frame work ,wall panelling (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet etc complete all as specified and directed.

M&L false ceiling using powder coated grid system of GI grid size 600x600mm with main runner 38x24x0.7mm,cross tee 25x24x0.7mm and wall angle 24x24x0.70mm using 12 mm thick fiber insulation boards fitted in the grid, grid system hanges by 3 to 4mm dia G.I wire to purlin, trusses, RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc.complete Including taking down and refixing E/M fixtures/fittings and reconnecting wiring connection complete all as specified and directed.

S&F in repairs CP grating 100/125 mm dia round fix on floor / nahani trap fixed with cement morter complete all as specified and directed.

S&F in repairs PVC connection 15mm dia 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.

S&F in repairs 32mm/40 mm dia PVC waste pipe for WHB/Urinal 60cm long with union complete all as specified and directed.

S&F in repairs CP jet spray with tube for single symphonic EWC complete all as specified and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern valveless,syphonic action type with inlet ball valve float and handle including brackets complete all as specified and directed.

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m complete all as specified and directed.

Removing building excavated material/soil etc to a distance of upto 20 KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Dismantling of old stone waer pipes 200 mm diameter including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps complete all as specified and directed.

Dismantling of old S.W. pipes 300 mm diameter including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps complete all as specified and directed.

S&F Reinforced concrete pipes 200mm bore class NP – 2, laid and jointed complete with collars, all as specified and directed.

Providing and laying non-pressure NP2 class R.C.C. pipes 300 mm dia. with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc complete all as specified and directed.

M&L for PCC 1:4:8 (using 40mm graded stone agrregate) as in bedding to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested 200mm dia complete all as specified and directed.

M&L PCC 1:4:8 (using 40mm graded stone agrregate) as in bedding to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested 300mm dia complete all as specified and directed.

M&L Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) including the cost of centering and shuttering - All work up to plinth level complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in benching to man holes including forming channel and drains and finishing with extra cement complete all as specified and directed.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Demolishing brick work in cement mortar manually/ by mechanical means as per and removing from working site complete all as specified and directed.

M&L for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all shapes and sizes in : built in cement mortar 1:6 as per direction complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement with water proofing compound ("200ML Per bag paid and measered seperately complete all as specified.

Supply only liquid water proofing compound.

Demolishing R.C.C. work of any type manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction complete all as specified and directed.

M&L Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.

Supply &fix 10mm dia Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level complete all as specified and directed.

Supply and fix mild steel round bars 10mm dia FE 410W Gde E-250 quality A or Fe 290 gde E-165 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips for man hole cover handle complete all as specified and directed.

Use and waste for centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform complete all as specified and directed.

Use and waste for centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls under 20 cm wide complete all as specified and directed.

Cutting into existing manholes for connecting new drains/pipe, making good to pipe and rendering, cutting out existing benches for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm internal dia for pipe all as specified and directed

M & L and Cleaning/desludging of existing septic tank, of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed.

M & L RCC(1:2:4) type B1 using 20mm graded stone aggregate in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

Providing and laying 65 mm thick factory made prepolished cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc complete all as specified and directed.

M&L for roughening surface of old concrete floor by picking, sweeping clean by using steel wire brush and washing down with water, fanning dust etc and taking down tarfelt/cement plaster and removing demolished materialn.exc. 50m complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in roof padding, all as specified and as directed.

M&L for 10mm thick cement plaster in cement mortar 1:4 in concrete, brick surfaces including finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound @ 3% by weight of cement over all as specified and as directed. Note :- WPC shall be measured and paid separately.

M&L for Water proofing treatment over roof at any height consisting evenly applied bitumen primer coat @ 0.30 litre/ Sq. m on surfaces,Applying evenly a tack coat of bitumen @1.20 Kg /Sqm and a layer of APP polymer 3 mm thick even membrane weight not less than 3.00 Kg/ Sq.m duly sealed at over laps joints with flame (complete by torch application) including PCC tiles 300x300x20 to 25mm thick over and including 20mm thick screed bed in cm (1:6) all as per manufacturer's instructions,including taking out old roof treatments with plastering if any complete all as specified and directed. Notes:- (i) Application of polymeric membrane shall be by torch application. (ii) The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (iii) Primer shall be applied after preparing & cleaning of fully dried cement plastered surface.

M&L for painting of aluminium paint of approved brand and manufacturer to give an even shade two or more coats of new work (over APP membrane on roof) or as specified and directed.

Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and directed.

All as per Item Ser No 66.00 above but for 55 to 80mm grith.

Demolition of reinforced cement concrete as in RCC slabs, beams,drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1100 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm mm x 1.6 mm complete all as specified and directed.

M&L for 15 mm thick Rendering on brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed .

M&L for one coats of acrylic exterior emulsion (weather proof) paint on walls ,parapets,facia,soffit of projections and other surface including preparation of old decorated suface by brooming,closing of minor holes,preparation of corners,edges etc by using required putty complete all as directed.

Dismantling stone slabs,interlocking paver block ,granite of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cemen mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floor & paving N'exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for PCC 75mm thick (1:3:6), type C2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base of floor complete all as specified and directed .

M&L for 10mm thick anti skid pavement tiles (heavy duty) of area n.exc 0.18 sqm each of approved colour & shade & antiskid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match laid over & including 20mm thick screed bed in CM (1:4) complete all as specified & directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply & fixing framed work conforming to Fe-290 Gde-E-165 such as door, grill, railing, ladder,cattle trap on open drains etc using mild steel angle iron, MS flats of sizes as directed with and including provision of MS hinges and MS Hold fast fixed complete all as specified and as directed .

M&L for providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels,plates ,bulbs etc including welding,grinding,buffing,polishing and making curvature(wherever required)and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary steel dash fastners,of required size on the top of floor or the side of waist slabs with suitable arrangments including taking out old railings all as specified and directed.

M&L for point wiring with PVC insulated unsheathed FRLS wire 1.5 sqmm multi stranded two run single core copper conductor cable passing through in and including medium grade PVC conduit pipe complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLS as continous earth wire with recessed mounting GI sheet box with cover plate suitable for modular switch/socket of adequate size including cutting chases in wall for inserting new conduit and making good the distrubed surface to match with the existing complete including taking down existing old u/s wiring all as specified and directed for followings :-

One light/ fan point/Exhaust fan point controlled by one switch.

One 3 pin socket outlet on independent board.

One 3 pin socket outlet on same board.

All as per item No 80.00 here in before but for one socket point out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor FRLSH and 2.5 sqmm PVC insulated copper conductor FRLSH as earth continuity conductor including taking down existing old aluminium wiring all as specified and directed.

M&L for power point wiring concealed type with PVC insulated unsheathed copper cable FRLS 4 sqmm multi stranded two single copper conductor in Including PVC conduit pipe complete with all accessories and with 4.0 sqmm PVC insulated copper cable FRLS continous earth wire, recessed mounting GI sheet box suitable for modular switch/sockets/AC metal clad socket of adequate size complete all as specified and directed .

Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed

Supply and fixing of modular switch single pole one way 16/20 Amps 1 module complete all as specified and directed

Supply and fixing of modular socket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed.

Supply and fixing of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose, surface bakelite 65x50mm three terminals complete all as specified and as directed

M&L for taking out out door units of Split AC of capacity 1.5/2 Ton, after disconnecting all electrical connection and suction and dischagre copper piping carefully including pumping down the gas into the compressor by controlling the suction and discharge valves and re-installation same day with in proper alignment/balancing and tightening of new GI nuts, bolts and washers alongwith anti-vibration pad including painting of outer cover with one coat of sythetic enamal paint in existing colour and testing complete all as specified and directed.

S&F electrolyte grade copper tubing of size 1/4'' suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed. (Note - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work.

All as per ser item No. 89 here-in-before but size 5/8"complete all as specified and directed.

S&F SP&N DB with 100 Amps rated bus bar, double door with 230 volts 12 way, 50 Hz complete all as specified and directed.

S&F for SP&N DB with 63 Amps rated bus bar, double door with 230 volts 8 way, 50 Hz complete all as specified and directed.

S&F MCB 6-32Amps,10 KA SP C-curve complete all as specified and directed.

S&F MCB SPN 63 Amps C curve, 10 KA complete all as specified and directed.

S&F MCB SPN 40 Amps C curve,10 KA complete all as specified and directed.

S&F MCB TPN( three phase and neutral) 40 Amps, 415 volts having a sensitive current 30mA complete all as specified and directed.

S&F MCB TPN( three phase and neutral) 63 Amps, 415 volts having a sensitive current 30mA complete all as specified and directed.

S&F sheet metal enclosure SPN type with 2 pin and earth plug and socket (industrial type with an including one MCB SP, C-curve type of capacity 25/32 Amp, 10 KA complete all as specified and directed.

M&L for Wiring for circuit/submain wiring alongwith earth wire of FRLS PVC insulated copper conductor,single core cable in surface/recessed of size 4X16 sq mm + 2X10 Sq mm earth wire including suitable size of PVC conduit and lugs/thimble with nuts, bollts and washers etc including taking down of existing unserviceable wiring complete all as specified and directed.

M&L for Wiring for circuit/submain wiring alongwith earth wire of FRLS PVC insulated copper conductor,single core cable in surface/recessed of size 2X10 sq mm + 1X6 Sq mm earth wire including suitable size of PVC conduit and lugs/thimble with nuts,bollts and washers etc including taking down of existing unserviceable wiring complete all as specified and directed.

M&L of Wiring for circuit/submain wiring alongwith earth wire of FRLS PVC insulated copper conductor,single core cable in surface/recessed of size 2X6 sq mm + 1X6 Sq mm earth wire including suitable size of PVC conduit and lugs/thimble with nuts,bollts and washers etc including taking down of existing unserviceable wiring complete all as specified and directed.

M&L of Wiring for circuit/submain wiring alongwith earth wire of FRLS PVC insulated copper conductor,single core cable in surface/recessed of size 2X4 sq mm + 1X4 Sq mm earth wire including suitable size of PVC conduit and lugs/thimble with nuts,bollts and washers etc including taking down of existing unserviceable wiring complete all as specified and directed.

S&F Heavy duty Air conditioner floor/wall mounted stand for 1.5/2 Ton outdoor units, including nut, bolt, clamps etc complete all as specified and directed .

S&F in replacement AC drain PVC flexible pipe 15/20 mm dia, laid in wall/ceiling including all clamps & accessories and connecting the condensate pipe of ACs to this conduit for proper drainout of condensate water from ACs of multi-story building complete all as specified and directed.

S&F in replecement energy efficient LED light fitting, slim LED panel, recessed mounting 2 ft x 2 ft made out of power coated CRCA sheet with acrylic diffuser, constant current output of electronic driver operating voltage range of 150 to 270 volts AC, PF>0.95, high powder LEDs having efficiency of 100-120 lumins/watts, junction temparature less than 85 digree C and TH less than 12 % and CCT 6500K,, CRT>90 suitable for 36 watt LED, LM 80 certified LM, pri wired in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose /connector etc and testing complete all as specified and directed.

S&F in replacement energy efficient LED light fitting surface mounted 4' long, 20 watt, 240 volts, 50 hz made out of extrunded aluminium housing with acrylic diffuser, LM 80 certified LED, costant current out put of electronic driver of operating voltage 140v to 270v and temperature - 10 digree centigrade to 50 digree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.95 with efficiency 120 lumins/watt and TDH less than 10%, CRI > 90 digree , CCT 6500 K in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed.

S&F wall mounted fan high speed 450mm sweep working on AC 240V, 50Hz, single phase copper winding complete all as specified and as directed.

Taking down VRF system ducting and copper piping and other existing accessories from existing location and deposited to E/M store complete all as specified and as directed.

S&F Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.5 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised iron earth lead 32x6 mm size, by means of bolts, nuts, check nuts and washers of galvanised iron and 32x6mm earth lead protected by provision of GI medium grade pipe 40 mm bore upto test point including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weigth not loss than 4 Kg/Sqm) and frame of angle iron 25x25x6 mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mm x 8mm FI with fixing arrangement ,funnel, wire mesh and excavation/earth work in hard dence soil, returning filling in and removal of surplus soil to a distance not exceednig 50 metre, all as per Electric Plate No 5 of SSR 2010 Part-I and connecting to earth test point complete all as specified and directed.

S&F Earth continuity conductor passing through PVC Conduit of size 25 mm main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 32x6 mm galvanised iron strip complete all as specified and directed.

S&F concealed Information socket category 6 RJ-45 Module 1 with complete inner, outer plate and GI sheet metal flush box 1 module 2.0 mm thick with shutter complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in PVC concealed connduit including cutting chasing for conduits and terminal boxes with all fittings /accessories and including FRLSH 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes 2mm thick GI sheet for Modular fittings including acessories as modular surface cover plate with frame, for 05 Amps Socket outlet point on independent board.complete all as specified and as directed.

S&F modular switch 6 Amp single pole one way-1 module complete all as specified and directed.

S&F modular socket outlet shuttered-6A-5Pin-universal India 2 Module complete all as specified and directed.

Supply and installation, commissioning of Desert cooler, i-pure console with multistate filters, electric driven single phase 240 volts having approx storage capacity 115 Litre of Make: Symphony Cat Part No SUMO115XL or equivalent in Usha/Havells. The product have fulfill the following specifications :- (a) Tank Capacity - 115 Ltr (b) Superior cooling with 3-side high efficiency honeycomb cooling pads (c) Easy fill or hassle free water filling (d) Clean air with i-pure technology having multistage filters. (e) Powerful fan with 28 ft air throw capacity. (f) Consumes 190 watt only (g) Mannual control (h) Auto louver movement in vertually any direction to make surrounded by chilled air.

m/s Kailash Chander (BID ID -3365144)

SARRAJ ENGINEERS AND CONTRACTORS (BID ID -3362784)

Bodyline Enterprises (BID ID -3365704)

DR Buildcon (BID ID -3366120)

Mohit Infratech (BID ID -3364521)