SPECIAL REPAIRS TO BUILDING NO P 26 AT INA EZHIMALA

Amount

Dismantling single layer of mangalore pattern tiles in roofing including battens etc of any description complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

S&F Galvanised Iron steel work in tubular sections of 14 Gauge of any size including special shaped washers, posts, purlins etc complete using ERW or induction butt welded tubes conforming to IS-1239 (part I)-1990 complete all as specified and directed.

M&L for Plates (plain or chequered) Fe -290 (Gde E- 165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and directed.

M&L for 2 coats of epoxy coated anti corrosive paint over new or untreated steel surfaces after a coat of epoxy primer all as directed by Engineer in Charge.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour, tile pattern having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified and directed by Engineer in charge.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of an colour, having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified and directed by Engineer in charge.

Disconnecting existing water tank capacity exc 500 Ltrs & n exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc. complete all as specified and directed by Engineer-in-charge.

S&F rotational moulded polythylene water storage tank (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part -I (1000Ltrs) capacity complete all as specified and directed by Engineer- in-charge.

Demolition of cement concrete (un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2, using 40 mm stone aggregate finished even & smooth without using extra cement complete all as specified.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605mm.The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm da mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM complete all as specified and as directed.

S&F Hangers 6 mm dia GI (upto 1200 mm length) adusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expension hold fastners 12.5 mm dia 40 mm long complete all as specified and as directed.

M&L for non asbestos fiber cement building board 4mm thick fixed in ceiling flat or sloping complete all as specified and directed.

M&L for preparation of newly board ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Taking down Chowkhats or frames (without taking off shutters from the frame) n exc 1.5 sq.m each complete all as specified and directed.

Taking down Chowkhats or frames (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sqm each complete all as specified and directed.

S&F powder coated aluminium frame for door, window and partition with one or more rebated including joining cleat for fixing etc complete all as specified. (thickness of powercoating not less than 50 micron) complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutter powder coating of any colour (thickness of powercoating not less than 50 micron), fixed type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete all as specified and directed.

S&F powder coated aluminum door aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkats, wrought, famed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping/frame to match on both faces complete all as specified and directed.

S&F 30 mm thick second class hard wood chemicaly treated factory made second class hard wood glazed/Gauzed & skertern shutter rebated & prepared to recieve glass, gauze etc. with sash bars divided into squares , with plain chamfered or rounded mitred & rebated sash bars any numbers complete all as specified and directed.

S&F of 12mm Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement complete all as specified and directed.

S&F Mild steel flat iron as in hold fast 25x6 mm confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) for hold fast complete all as specified and directed by Engr in Charge.

M&L for preparation and treating ends of posts, back of chowkats etc area of tarred exc 0.10 Sqm but n.exc 0.50 Sqm complete all as specified and directed.

M&L for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F 100 mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F of stainless steel butt hinge, size 100 mm complete all as specified and directed.

S&F aluminium alloy, anodized,sliding door bolt with hasp, staple (bolt type ) & fixing clips of sheet , cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy & fixing .250 mm size complete all as specified and directed.

S&F hasp and staple, safety type, aluminium anodised with hinges including bolt to hinges plate and fixes with screws. , wire type, stove enamelled black, including bolt to hinge plate and fixed with screws size 125mm complete all as specified and directed.

S&F aluminum (die cast) door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm complete all as specified and directed.

M&L for aluminum alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing within oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface exc 0.11 sqm n exc 0.18 sqm 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match & rendering 10mm thick on stone masonry wall surfaces in cement mortar 1:4 for backing coat of skirting, dado etc complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick screed bedding of C M 1:4. complete all as specified and directed.

Dismantling of stone slabs of any description or thicknes in floors apron etc. bedded and pointed in any mortar complete all as specified and directed.

Material and Labour for machine cut Granite of any type slab 20mm thick in floors etc laid over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as per directed and specified.

Demolition of brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded aggregate), exc. 10 cm in width and setting in mortar CM 1:6, complete all as specified and directed.

M&L for laterite stone walling of regular coursed,well bonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) for slabs supported on walls, beams and columns in floors, deck slabs and shelves and the like complete all as specified and directed.

M&L for formwork of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster any description on brick or stone surface including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed.

M&L for rendering 15mm thick on stone masonry internal surfaces in cement mortar 1:6 and finish the surface even and smooth complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of stone surfaces with using WPC & finished even and smooth without using extra cement in external surfaces complete all as specified and directed. Note:- WPC will be Paid and measured Seprately

M&L for preparing new plastered or unplastered surface of wall and applying two coat of oil emulsion distemper white or tinted including chalk whiting on wall preparatory to distemper and rubbed with abrasive paper and dusted off complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of antifungal paint Apex ultima or equivalent over a coat of primer on wall complete all as specified and directed.

M&L for preparing old plastered surface and applying two coats of antifungal paint Apex ultima or equivalent over a coat of primer on wall complete all as specified and directed.

M&L for complete removal and preparing old plastered or unplastered surface of wall and applying two coat of oil emulsion distemper white or tinted over a coat of chalk whiting on wall complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall/ceiling surfaces complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down 15 mm GI steel tubing and connections including for refixing or removal to store complete all as specified and directed.

Taking down 20 mm GI steel tubing and connections including for refixing or removal to store complete all as specified and directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 32 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20 mm bore of ball brass valves, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and directed.

S&F stop valves, cast copper alloy 20 mm bore screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and complete all as specified and directed.

S&F 20 mm bore dia Union brass to connect iron to poly-ethylene & fixed complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern ) with plastic water closet seat including fixing of flush pipe to pedestal pan including all joints complete all as specified and directed.

S&F 10 ltr PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and directed.

S&F in repair wash basins, Vitreous china flat back of size 550mmx400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15mm fancy type, chromium plated bib taps, with crunch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 20mm angle cock fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F 32mm dia PVC flexible waste pipe for urinals/WHB complete all as specified and directed.

S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F brass chromium plated shower rose 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

S&F 15 mm angle cock with flange Cat part No. k 7710 of prayag or equivalent, screwed down screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix 32mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

M&L for hume pipe RCC septic tank with RCC precast manhole covers having vent pipe etc for 25 users including excavation, return filling and removal if any of any soil incluing all neceaasry fittings and making good complete all as specified and directed.

S&F waste pipe 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F waste pipe 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as bed to drain pipes including packing under & haunching against sides of pipes after they are laid & tested for 110mm dia pipe complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece. Single (single Y) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) Nahani /gully trap 125/110 mm with grating on top, setting and jointing with solvent cement complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 B1 smooth finished and reforming benching as required for 150mm internal dia pipes complete all as specified and directed.

M&L for flat iron wind tie for fixing to galvalum corrugated sheetings and eaves gutter complete all as specified.

S&F in repairs PVC eave gutters of size 6", half round with edges with brackets/clamp etc complete all as specified and directed by Engineer in Charge.

M&L for 50 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and directed.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section 3 of Earthwork) to a distance of exceeding 1 Km not exceeding 5Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches ceiling roses, pendent, regulators, sockets, MCB/ MCCB/ MCB DB/ earth plug and socket etc and making good matching to the existing colour to the disturbed surface all asspecified and directed by Engineer in charge.

M&L for colour code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through concealed/open ,semiconcealed PVC conduit not less than 20 m m of medium grade including modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) including FRLS 1.5 sqmm earth wire copper insulated connected to common earth dolly all as specified for the following:-

(a) One Light/ fan point controlled by one switch

(b) One 3 pin socket outlet 6 Amps on the same board with other switches

(c) 6 Amps socket point on independent board

All as per item no 112 here in above but 2.5 sqmm for 5/15 Amps socket on independent board.

M&L for sub main wiring using 2 runs of 2.5 sq mm FRLS ,IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC Conduit/casing caping along with 1 run of 2.5sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed by Engr-in-charge. Note:- (i) One run of PVC conduit/ casing caping, 3 runs of 2.5 sqmm PVC insulated copper conductor cable will be measured as one unit. (ii) Strictly follow the proper colour code red/yellow/blue for phase, black for neutral and green for earth.

S&F modular switch one way 6A ,1 module all as specified and directed by Engineer in charge.

S&F modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose , ISI marked all as specified and directed by Engineer in charge.

S&F modular switch one way 16A ,1 module,ISI marked all as specified and directed by Engineer in charge.

S&F modular socket 6 Amps 2/3 pin 2 module,ISI marked all as specified and directed by Engineer in charge.

S&F lamp holder batten PVC/poly carbonate body ISI marked all as specified and directed by Engineer in charge.

S&F 9 W LED lamp with base B22 all as specified and directed by Engineer in charge.

S&F ceiling rose 3 terminal PVC/polycarbonate isolated body all as specified and directed by Engineer in charge.

S&F modular fan step regulator 2 module, ISI marked all as specified and directed by Engineer in charge.

S&F in repair MCB protected socket PVC plastic Base model with one single pole MCB, AC 240 Volts, 20/32 Amps all as specified and directed by Engineer in charge.

S&F MCB single pole 6 to 32 Amps capacity 230 Volts all as specified and directed by Engineer in charge.

S&F MCB single pole and neutral 32 Amps capacity, C series, 10 KA, 50 Hz ,230 Volts all as specified and directed by Engineer in charge.

S&F MCB single pole and neutral 40 Amps capacity, C series, 10 KA, 50 Hz ,230 Volts all as specified and directed by Engineer in charge.

Dismantling /opening the ceiling fan of 1200 mm sweep of any make removing the old defective winding carefully cleaninig the inner parts and rewinding the same gauge super enamelled copper conductor of good insulation ,varnishing ,drying and reassembling complete all as specified and directed by Engineer in charge.

Dismantling /opening the ceiling fan of 1200 mm sweep of any make removing the old defective ball bearing and bushes of any size and fixing new bearings of suitable size of make SKF/ TATA/NBC and bushes including greasing and reassembling and testing all as directed by Engineer in charge.

Removing old unserviceable fan capacitor and material and labour for fixing new capacitor 2.5 mfd of suitable make and size testing the fan all as directed by Engineer in charge.

S&F ceiling fan blade 1200 mm sweep suitable for existing make and size all as specified and directed by Engineer in charge.

S&F ceiling fan canopy 1200 mm sweep suitable for existing make and size all as specified and directed by Engineer in charge.

S&F in repair MCB DB SPN 230V double door type with bus bar of appropriate current carrying capacity, neutral link, earth bar and din rail complete of following size:-

S&F in replacement wall mounted 20 W LED 4ft batten output lumen greater than 100 lumen/watt , having extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver with all accessories pre-wired and including connecting up 3 core 1 sqmm copper conductor cable fromfitting to ceiling rose/connection terminals all as specified and directed by Engineer in charge. Make:- Crompton TRIM LINE cat part no LDL-20-CDL or equivalent in HAVELLS/ PHILIPS/WIPRO

S&F in replacement wall mounted 10 W LED 2ft batten output lumen greater than 100 lumen/watt , having extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver with all accessories pre-wired and including connecting up 3 core 1 sqmm copper conductor cable fromfitting to ceiling rose/connection terminals all as specified and directed by Engineer in charge. Make:- Crompton TRIM LINE cat part no LDL-10-CDL or equivalent in HAVELLS/ PHILIPS/WIPRO

S&F in replacement Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire out put lumen >100 lumen/w, CCT > 5500 k, power factor > 0.95 comprising of high brightness LEDs 10 W with opal diffuser with all accessories pre-wired and including connecting up with 3core flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals. aa as specified and directed by Engineer in charge. Make:- Jaquar cat part No LBLK01x010xC or equivalent in Havells/Crompton/Philips/Wipro.

S&F in replacement LED street light Luminaire 25 watts, 240 volts,50 Hz,pressure diecast aluminium coating ,heat resistant glass, with THD< 10% ,PF > 0.95 ,with system luminous efficacy > 100Lm/W and CCt 5700K , Internal surge voltage protection 10 Kv all as specified and as directed by Engineer in charge. Make:- Philips/Wipro/Crompton/Havells

S&F fan hook required at site for fixing new ceiling fan and connecting complete all as specified and directed.

S&F exhaust fan 200 mm sweep AC single phase 230 volts non metalic type including connection from ceiling rose to connection terminal by 3 core 1.5 sqmm copper conductor cable complete all as specified and directed by Engineer in charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 meter deep below ground level, connected to 4 mm size galvanized wire as earthing lead by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including provn of necessary excavation and earthwork in any type of soil, PCC pit, RCC cover and 20 mm bore medium grade watering pipe, water funnel with GI wire mesh, 40 mm bore medium grade protection pipe, common salt, charcoal dust, returning filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion all as specified and as directed.

SANDR

RS ENTERPRISES

KDR CONSTRUCTION

Palace constructions

M/S V B MOHAMMED ALI