SPECIAL REPAIR TO CERTAIN BLDGS AT 59 WEU CONSTN OF WATER TANK WITH COVERED SHED AT GALUTHI CONSTN OF NEW DIESEL GENERATOR PLINTH WITH OVERHEAD SHED AT 51 NW SIG REGT AND PROVN OF AREA DRAINAGE AT 25 IDSR AT RAJOURI UNDER GE 862 EWS

Amount

Sch 'A' Part-I (B/R works) Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete or other than fair surface, using integral water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete or other than fair surface, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on concrete surface as in ceilings, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls including cornices etc and applying two coats of Exterior Emulsion all weather paint Ist quality (APEX ultima of Asian, luxury from berger, excel from nerolac or equivalent ) on external surfaces in multy colour patern as approved by GE over and including a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surface of wall including cornices and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling including cornices and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces, preparation of plastered/ unplastered/ untreated surfaces of walls including cornices etc and applying two coats of Exterior Emulsion all weather paint Ist quality (APEX ultima of Asian, luxury from berger, excel from nerolac or equivalent ) on external surfaces in multy colour patern as approved by GE over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment surface of wall and and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment surface of ceiling and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick wall care putty, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4 Sqmm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site, complete all as specified and directed.

S&F for Pressed steel door frame of size 125mm x 60mm with one or more rebates including filling of PCC 1:3:6 type C-0 in hollow portion and necessary fixing, lugs, hinges, lock & strike plate, complete all as specified and and as directed and as shown on drwaing.

M & L 35mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part - I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M & L 35mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain any numbers, complete all as specified and directed.

M & L for powder coating of any colour (Thickness or powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

M&L for powder coated anodised aluminium door shutters of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing not less than 0.55 Kg/M including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, hydraullic door closer, mortice lock anodised aluminium snap beading screws etc complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed.

S & F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification, complete all as specified and directed.

Supply only 100 mm size MS butt hinges medium weight cold rolled fixed/welded to frame complete all as specified and directed.

S & F 150mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S & F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S & F 140mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, complete all as specified and directed.

S & F 300mm, mild steel rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

M & L door bottom sealing strip guard with double sided insulation for doors, which are equally able to keep wind, dust and sound or polluted air out side of door (i.e. Anti Lizard strip) fixed to door, complete all as specified and directed.

S & F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

M & L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10cm in width or grith and applying Two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M & L for powder coated anodised aluminium window and ventilator shutters of any colour (Thickness or powder coating not less than 50 micron) side hung type without sash, aluminium sections weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 nos) hinges type B-21 100 mm long (3 Nos) suitable handle (2 nos) complete all as specified and directed.

S & F for power coated of any colour (Thickness or powder coating not less than 50 micron) aluminium anodized three track sliding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock, etc including 65 x 39.5x 1.5 mm section for complete frame and rubber beading and glazing clips etc, complete all as specified and directed. Note: Unit rate quoted shall be deemed to include for cost of glass/wiremesh rubber beading, glazing clips, neoprene packing, fittings such as handles, butt hinges, tower bolts etc

S & F for aluminium anodized grills 6.3mm dia decorative type 75mm mesh size, complete all as specified and directed.

S & F in 4 mm thick sheet glass of any size fixed to aluminium doors/windows and ventilators, complete all as specified and directed.

S & F of box type steel window/ventilators with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Cutting holes into block wall built in cement mortar for inserting hold fast exc half brick and n.exc one brick and making good to dismantled portion with PCC 1:3:6 type C-1 or cement mortar 1:3 complete all as specified and directed.

M & L for hold fast made out of flat iron confirming Fe 410 - 1 or 310 - 0 complete all as specified and directed

M & L treating small articles steel and iron work, new or old, of any description and girth, not otherwise described and treated with tar or coal tar black paint such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sqm each, complete all as specified and directed.

S & F for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M & L 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S & F 30mm width of flaps continuous (Piano) hinges, mild steel, bright finish or electro galvanished, complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, cast type (ISI marked), complete all as specified and directed.

S & F of 75 mm long aluminium anodised barrel tower bolt of extruded section (ISI marked), complete all as specified and directed.

S & F 100mm hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F stainless steel curtain rod 20mm dia (of approved colour and design) complete all as specified and directed.

S & F stainless steel 'T' and 'L' type brackets with finials complete as specified and directed.

M&L for post antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes 300mm deep with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as directed and as approved.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as directed and as approved.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L for 25mm thick cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) for sub base/ levelling couirse complete all as specified and directed.

M & L light shade Vitrified coloured with border type tiles 8 - 9 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 10mm thick screed bed in CM(1:4) in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

M & L light shade Vitrified coloured tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in skirting over and including 10mm thick screed bed in CM(1:3) as in skirting/ dado etc set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but no exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed in CM (1:4) as in floor, complete all as specified and directed.

M & L for glazed ceramic coloured tiles 350 x 250 x 7mm/450 x 350 x 7mm thick with highlighter basis as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile incl 10mm thick rendering in CM 1:3, complete all as specified and directed.

M & L for granite work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed in Cement mortar 1:3, complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 20 - 25mm thick border basis over & including cement 20mm thick screed bed in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and as directed

Demolition of brick work or stone/boulder or concrete block masonry including all quoins, arches, pillars, etc. built in cement mortar complete all as specified.

M & L precast RCC 1:2:4 type B1 using 20mm grade stone aggregate as in landings, cooking platforms, cover slab, chajjas etc.and similar articles with plain faces set in CM 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete in any description or ground floor and paving not exc 15cm thick complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing, complete all as specified and directed.

M&L for RCC(1:2:4) type B-1 (using 20mm grade stone aggregate) as in basement slab, slabs, supported on walls, beams & cols in floors, roofs, landing, deck slab & shelves, complete all as specified and directed.

Form work to sides & bottom of shelves and like, complete all as specified and as directed.

Providing and fixing 4mm thick designer cement fibre ceiling board in ceiling fixed with screws as per manufactures instructions (Make : Everest or equivalent) laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be under coated white. The frame shall comprise of main runner made from 0.33mm thick galvanized steel sheet & size of 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200 mm maximum centres. hangers of GI wire 4mm dia to be fixed by the approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with(double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300 mm long of white colour all as per instructions including removal of old ceiling of any type complete all as specified & directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.

M&L for Mild steel structural steel work conforming to Fe 410 - S incl tubular members as in main and cross beams, hip and jack rafter; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and painted with a shop coat of zinc chromate primer before hoisting and fixing in position, complete all as specified and directed.

S & F of Pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S & F of Pre - painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing, complete all as specified and directed.

S & F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing, complete all as specified and directed.

S & F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing, complete all as specified and directed.

Dismantling water storage tank of capacity exc 500ltr but not exceeding 1000 ltr and removing to store, complete all as spcified and directed.

S & F for rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position incl all necessary accessories such as brass tank nipple, ball brass valve 20mm bore, as per the site requirement, complete all as specified and directed.

S & F in repairs for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed, complete all as specified and directed.

S & F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and directed.

S & F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia, complete all as specified and directed.

S & F in repair towel rail 20mm dia 600mm long CP towel rail fixed with and incl chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S & F in repair Glass corner shelf with tempered glass,stainless steel brackets and polished chrome finish rail, complete all as specified and directed.

S & F in repairs Sheet front glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S & F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 15mm dia angle valve, cast copper alloy, fancy type,chromium plated suitable for iron pipe and one end and PVC connector on other, ISI marked, complete all as specified and directed.

S & F in repairs concealed type Stop valves, 15 mm bore of pipe, cast copper alloy CP, screwed down, high pre-ssure, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S & F in repairs brass CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc, complete all as specified and directed.

Supply and fixing in repairs viterous China wall hung water closet in one piece type of including seat cover and gasket, concealed flushing cistern, CP jet with PVC pipe of superior quality and all necessary fixing arrangements complete all as specified and as directed.

Supply and fix in repairs vitreous china squatting pan, orissa pattern size 680 x 470 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of cement concrete, complete all as specified and as directed.

S & F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F in repairs CP Health faucet with 1.2 meter long stainless steel hose and wall hook alongwith two way brass CP Bib cock type with handle, screwed down, screwed for iron pipe or famale of quarter turn type, complete all as specified and directed.

S & F in repairs Vitreous China Wash hand basin white, flat back, size 630x450mm size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

S & F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed.

S & F in repairs 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in PVC waste pipe 600/900mm long suitable for Wash hand basins and urinals including connecting, complete all as specified and directed.

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repairs 15mm fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repair for 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F in repair for 15mm bore brass chromium plated wall mixer with connection to the over head shower arrangement complete all as specified and directed.

S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 600mm long, complete all as specified and directed.

S & F bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed.

S & F in repair SS Towel Ring complete all as specified and directed.

S & F SS peg set of 6 hooks complete all as specified and as directed.

S & F in repairs CP toilet paper holder fixed to wall with brass CP screw, complete all as specified and directed.

S & F soap dish, chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws, complete all as specified and directed.

S & F CI floor trap of 75/100mm and CP grating suitable for 75/100 mm bore floor trap and fixed with white cement, complete all as specified and directed.

S & F assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6mm square support pipes, dedicated holes for spoon, pegs etc over all size 600mmx750mmx250mm of standard pattern and approved make, complete all as specified and directed.

S & F for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S & F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white, bowl type, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe with grating and union for discharge pipe including connecting to waste pipe, complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches, complete all as specified and directed.

S & F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) bends of any radius with access to door, complete all as specified and directed.

M & L for 50mm thick cement concrete 1:2:4 type B2, using 40mm graded stone aggregate over 75 mm thick cement concrete 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight), complete all as specified and directed.

M & L for Salt glazed stoneware drain pipes 150mm bore laid in trenches and jointed, complete all as specified and directed.

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe, complete all as specified and directed.

Demolition and breaking up drain pipes 150mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

M & L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends complete all as specified and as directed

Demolition of concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 100mm thick PCC 1:5:10 type E2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed.

M & L for coloured chequered cement concrete tiles of size 300 x 300 x 25mm thick with grey cement and pigment laid over and including 20mm thick cement screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor including dismantling of old tiles including cement mortar bedding and removing rubbish off the premises, complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required, complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation, shaft, wells, cesspit, manhole, pier holes etc and n. exc 10sqm on plan and getting out in any type of soil complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns raft and raft beams and similar works, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

M&L for rendering 15mm thick on brick wall or concrete surface in cement morter 1:6 finished fair and even, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-2 (using 40mm grade crushed stone aggregate) as in surface channels and drains including necessary form work, complete all as specified and directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends, complete all as specified and directed.

M&L for joist, channel, angle, tee section, fixed independently, without connecting plates etc (cut to ordinary length i.e. within 20mm of the length indicated) conforming to Fe 290 grade E-165, complete all as specified and directed.

Removing excavated materials (soils) n. exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point, complete all as specified and directed.

Excavation in over areas, n.exc 1.5m deep and getting out in any type of soil complete all as specified and as directed.

Removing excavation material to distance of exc 1.5 Km but n.exc 5 Km and depositing where directed at a level n. exc 1.5m above the starting point, complete all as specified and as directed.

S&F steel work in tubular trusses, purlins, rafter, posts, gusset plates cleats etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade), complete all as specified and as directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded agregat) as in as in foundation filling and mass concrete for drains, complete all as specified and directed.

Extra for forming fair finished drain or channel not exc 70cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc, complete all as specified and directed.

S&F of 450mm bore reinforced concrete pipe class NP-2, laid, jointed withcollar in neat cement slurry, complete all as specified and directed

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone agregate) as in bed to drain pipes of 450mm bore including packing under and haunching against the sides of pipe after they are laid and tested, complete all as specified and directed.

Returning, filling in including spereeding, levelling, watering and wall ramming in layers n exc. 25cm thick, complete all as specified and as directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted, or forged into apikes, framed guard bars, barred iron doors, ladders, framed baluster, walk aways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E-165 including cutting and fixing, complete all as specified and as directed.

Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, bell, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.

M&L for point wiring for one light point/fan point/bell point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including PVC casing caping medium grade of 25mm width complete with all acessories including providing modular metal flush boxes with modular white cover plate and frame of module suitable for mounting modular switches, sockets, fan regualrors etc with necessary screws and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces to match with the existing, compete all as specified and directed as per following:-

one light point/ fan point/ bell point controlled by one switch, complete all as specified and directed.

One socket out let 5 Amp point controlled by one switch one way on same switch board, complete all as specified and directed.

One socket out let 5 Amps point controlled by one switch one way on independent board, complete all as specified and directed.

M&L for modular point wiring for complete with 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through PVC conduit heavy duty (minimum 25mm in width), with its fittings such as tee, corners, overlapping, connectors, etc fixed over walls, ceiling, floors etc including provision of 2.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush boxes with modular white cover plate and frame concealed in walls with suitable modular fitting housing switches, socket outlet and fan regulators etc for one 6 Pin, 16/6 Amps socket outlet on independent board controlled by one 16 Amps switch, complete all as specified and directed.

S&F modular type switch 6 Amps, 1 way, 1 module, complete all as specified and directed.

S&F modular type socket outlet 6 Amps, 2/3 Pin, combine, 2 module, complete all as specified and directed.

S&F modular type switch 16 Amps, 1 way, 1 module, complete all as specified and directed.

S&F modular type socket outlet 16 Amps, 6 Pin, 2 module, complete all as specified and directed.

S&F modular type fan regulator, stepped type 100W, 2 Module, complete all as specified and directed.

S&F modular type bell push switch 6 Amps, 1 way, 1 module, complete all as specified and directed.

S&F call bell AC 230 volts single pole. Ding dong, sound type, complete all as specified and directed.

S&F in replacement ceiling rose surface bakelite 3 terminals, 63.5 x 17mm, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

S&F in replacement lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/ angular/ pendent fittings, complete all as specified and directed.

S&F LED lamp 9/12watt, B22, CDL, 240 volts, suitable for lamp holder, complete all as specified and directed.

M&L in replacement for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

M&L in replacement for LED Tube light fitting, 1x 10 watts, 220V, AC, complete with 2 feet decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body,enviromental friendly, energy efficient ready to use pack complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangeme

S&F in replacement recess mounting 6500k light fittings LED 36 watts 2x2 panel surface/ recess mounting light fitting LED backlit with high efficient LEDs & glare free opal diffuser IP-20, internally prewired, 230V, complete with all accessories such as electronic driver, connector block etc and neccessary fixing arrangement at any height, complete all as specified and directed. Note: Material required such as safety harness, ladder and T&P etc will be provided by the contractor without any extra cost.

S&F in replacement of LED building security light 20 watts, 240volts, AC, outdoor type with high pressure diecast housing with individual LEDs as light source and lence embedded PC cover having Top opening separate driver compartment with IP-66 protection and impact resistance of IK 07 complete with connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable size 1.0 Sqmm, complete as in repeir all as specified and directed

S&F in replacement for MCB distribution board SPN 8 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)

S&F in repair/ replacement of MCB SPN 240 volt any rating from 63 Amps conorming to IS 8828 of 1996, with rupting capacity 10KA including providing thimble for out goint cable complete all as specified and directed.

S&F in replacement of MCB SP 240 volt any rating from 5 to 32 Amps conorming to IS 8828 of 1996, with rupting capacity 10KA including providing thimble for out goint cable complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2009 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earth wire and protection pipe upto board is included in the rate quoted)

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and including painting of ceiling fans complete, in situ with synthetic enamel paid by spraying including filling cavities with filler, one coat after cleaning all dust etc and reinstalled at existing position, complete all as specified and directed.

S&F in replacement of street light bracket made up of 40mm bore light grade GI pipe 1.2 mtr long including necessary bending, welding etc, complete all as specified and directed.

Supply and laying in replacement GI pipe 40mm bore light grade with all fitting laid in trenches/ under road/ floor/ pole/ wall for protection of cable including, claming of pole. Wall in proper size of clamps, nut bolt, washers etc complete all as specified and directed.

M/S BADRI NATH GUPTA (BID ID -3365121)

M/s Anil Engineers & Builders (BID ID -3368747)