CMLRRP-MADYANATHU PAPPANIKKUNNEL ROAD TILE PAVING,RETARRING AND CONSTRUCTION OF DRAIN IN WARD 6 OF UPR GP

Amount

75.5.5.A.1pb : Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

75.5.2.1pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

od663342/2020_2021 : Plastic Roads - Bitumen S-65 &lt;br&gt;&lt;br&gt;20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder&lt;br&gt;&lt;br&gt;Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic)&lt;br&gt;&lt;br&gt;Case - I By Manual Means&lt;br&gt;&lt;br&gt;(II)Bitumen (S-65) (VG - 30) (derived from 75.5.9.2.2.Pa)

75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)

od617448/2020_2021 : New data QUARRY MUCK MoRD DATA :-Filling up low laying and waterlogged areas with quarry muck , spreading in layers&lt;br&gt;, levelling the top at site and consolidation by ramming etc. complete

od617449/2020_2021 : Providing and laying 80mm thick factory made cement concrete interlocking paver&lt;br&gt;block of M30 grade made by block making machine with strong vibratory compaction, of approved size&lt;br&gt;design &amp; shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm&lt;br&gt;metal all complete as per the direction of Engineer - in- charge&lt;br&gt; for medium traffic areas&lt;br&gt;

od617450/2020_2021 : MoRD - 1:4:8 :Providing and laying in position cement concrete of specified grade excluding the cost&lt;br&gt;of centering and shuttering all works up to plinth level CC 1: 4:8 (1 cement 4 course sand 8 graded stone&lt;br&gt;agregate 40mm nominal size) for concrete road base layer ( Modified MoRD 11.4.1)

od617451/2020_2021 : MORD -1:2:4. Providing concrete forplain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802,803,1202&amp;1203 P.C.C grade M20 Nominal mix (1:2:4)

CONSTRUCTION OF DRAIN

11.1.1.1 : Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.I.Ordinary soil(i)Upto 3 m depth

od628444/2020_2021 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 &amp; 1203&lt;br&gt;&lt;br&gt;I.P.C.C grade M 10&lt;br&gt;&lt;br&gt;(i)Nominal mix 1:4:8

12.5.3 : Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204For height upto 5 m III.R.C.C grade M 20

11.4.4 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203IV.R.C.C grade M 20

11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

od663290/2020_2021 : Supplying and errecting Name board including 2.6.1 Earth work excavation 0.30X0.30X0.45,4.1.3 Cement concrete 1:2:4 using 20 mm brocken stone ,10.16 .1 Steel work in built up (round, rectangular hollow tubes)50 mm dia.G.I Pipe and 25X25 mm angle G.I pipe 2 Nos-2.70mX3.00kg/m and 25X25mm angle 2.70mX1.60kg/m,16.60.1 Manufacturing ,supplying and fixing M.S Sheet board upto 2mm thickM.S sheet etc of size 1.00X0.50 m,13.61.1Painting with synthetic enamel paint Two or more coats new work post ,13.71 Lettering with Jappan paint approved quality

K T THOMAS

Bidder Name

P.Thomas Joy

K T THOMAS