REPAIR TO CEILING FAN , EXHAUST FAN, WALL MOUNTING FAN, PEDESTAL FAN AND AIR CIRCULATING FAN AND DESERT COOLERS AND REPAIR TO WINTER APPLIANCES, STORAGE GEYSERS AND WATER HEATER UNDER AOR OF GE (ARMY) NO.1 JODHPUR

Amount

M&L for (in existing location and position) taking out and refixing after repairs, including rewinding of Desert Cooler fan motor of any make, 3 speed,1400 RPM of capacity 1/5 HP with super enameled copper winding wire of appropriate size (as per existing) incl Bush/Shaft/Ball bearing as per existing make/model, complete all as specified and directed.

S&F in replacement of oil filled capacitor 4.00 MFD for desert cooler fan motor, complete all as specified and directed.

M&L in replacement of bottom tank and top ( in existing location and position) of approx size - 750 X 750 X 200 mm ( as per existing ) for Desert Cooler made out of 18 gauge PGI sheet with and including two coats of synthetic enamel painting over one coat of red oxide primer on the new surfaces to match with existing surface outside and inside surface with approved quality paint including leakage testing, complete all as specified and directed.

M&L ( in existing location and position ) in replacement of front grill ( as per existing )( horizontal and vertical members moveable) of the Desert Cooler made out of 20 gauge PGI sheet with Name plate, complete all as specified and directed.

M&L in replacement of side supporting columns to be fabricated out of 18 gauge PGI sheet of size 80x80x800 mm with and including necessary nut, bolts etc., complete all as specified and directed.

M&L in replacement of side/rear panel made out of 20 gauge PGI Sheet with suitable handles with and including two coats of synthetic enamel paint over one coat of red oxide primer to match with the existing desert cooler, complete all as specified and directed.

M&L for painting to old steel surfaces of Desert cooler capacity up to 5000 Cft with one coat of synthetic enamel spray paint hammer tone paint of approved colour over one coat of red oxide primer on external surface and one coat of anti corrosive black paint inside the Body tank and side grills over a coat of red oxide primer complete including scraping/rubbing with wire brush on old surface of Desert cooler and writing of MES No etc complete at site or at E/M store yard all as specified and directed by Engineer-in-Charge .

M&L in replacement of Desert Cooler fan motor capacity 1/5 HP three speed, 1400 RPM single phase with aluminium fan blade, bracket supporting stand, complete all as specified and directed.

M&L in replacement of submersible pump of discharge head 2.5 Mtr 220-240 Volts AC Supply single phase 40 watt, complete all as specified and directed.

M&L in replacement of Wood wool pad for Desert Cooler of size 500 x 550 x30 mm (set of three pads) superior quality including binding properly with GI wire of 16 SWG complete all as directed by Engr-in-Charge .

Material and labour in replacement of MS weld wire mesh having apparture size 25 mm and fitted in side grills/rear complete all as directed by Engr-in-Charge.

M&L in replacement of Wood wool pad Heavy duty for Desert Cooler of suitable size (set of three pads) superior quality including binding properly with GI wire of 16 SWG with grill complete all as directed by Engr-in-Charge .

M&L in replacement of PVC insulated and PVC sheathed cable copper conductor 3 core 1.0 Sqmm cross sectional area superior quality complete all as directed by Engr-in-Charge.

Material and labour in replacement of PVC water distribution cup of one inlet and 3 outlets fixed with MS nuts and bolts complete (as per sample) all as directed by Engr-in-Charge .

M&L in replacement of PVC elbow suitable for desert cooler (as per sample) all as directed by Engr-in-Charge .

M&L in replacement of PVC pipe 15 mm dia heavy duty for Desert Cooler Pump complete all as directed by Engr-in-Charge .

M&L for painting to desert cooler stand with two coats of synthetic enameled paint of approved colour over a coat of red oxide primer including preparation of old surfaces complete all as specified and directed by Engineer-in Charge.

M&L in replacement of motor fixing ring (not less than 25 mm width ) for desert cooler eight screw / clip type(asper sample) complete all as directed by Engr-in-Charge .

M&L for taking down desert cooler installed at ground floor safely , including cleaning inside , outside , motor oilng sevicing and pump servicing including putting up in same location and position complete all as directed. NOTE: Replacement of any spare parts shall be measured and paid separately under respective item of schedule 'A'.

All as per item No. 20.00 here-in-above but desert cooler installed at first floor

All as per item No. 20.00 here-in-above but desert cooler installed at Second floor

M&L for framed brackets for cooler stand as shown in Drg No CEJZ/TD/72/2015 sheet1/1 of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') and used for step/stairs, including M&L for steel rack bolt / fastner 100 mm long 12 mm dia - 4 Nos for fixing stand, complete all as specified and as directed

S&F in existing location and position PTMT stop cock 15 mm dia high pressure screwed for iron pipe, complete all as specified and as directed.

S&F in existing location and position PTMT Ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and as directed.

M&L for wiring for circuit / sub main wiring alongwith earth wire with the following sizes of FR LSH PVC insulated , multistranded copper conductor cable ,( 2 X 1.5 Sq mm + 1X 1.5 Sqmm ), single core drawn in and including PVC casing capping 25 mm width , to be fixed on surface/ ceiling, complete all as specified and directed

S&F in replacement of 3 Pin Plug Top 06Amps ISI Marked 230 Volts, complete all as specified and directed.

M&L in replacement of PVC Connection pipe ISI Marked 300mm long heavy duty, complete all as specified and as directed.

M&L in replacement of PVC stop cock ISI Marked heavy duty, complete all as specified and as directed

S&F in replacement PVC moulded box of switch socket combination of cap - 6 Amp, complete all as specified and as directed.

M&L for dismantling and removing old burnt out copper winding wire of ceiling fans of size - 1200 mm (48” ) sweep of any make and rewinding with New super enameled copper winding wire of existing gauge as per old copper winding pattern and design to give same performance as per original fan's make including providing insulating media , varnishing (Golden), Cleaning, Oiling, Greasing etc, including replacement of u/s ball bearing/ bush (if any u/s found) as per existing make & model and refixing all the parts complete to the entire satisfaction of Engr-in-Charge. Note:- Rate of new ball bearing during rewinding of fans are deemed to be inclusive in the quoted rate.

All as per item No 31.00 here in before but Exhaust Fans of size 9" ( 225 mm ) Sweep

All as per item No 31.00 here in before but Exhaust Fans of size 12" ( 300 mm ) Sweep

All as per item No 31.00 here in before but Exhaust Fans of size 15”/16” ( 375 /400 mm ) Sweep

All as per Item No 31.00 above but Exhaust Fans of Size 18” ( 450 mm ) Sweep

All as per item No. 31.00 here in before , but for WALL MOUNTED fan alongwith replacement of osscilating mechanism and regulator complete suitable for wall mounting fan and support hud assembly of size - 16"/18" complete all as specified and directed.

All as per item No.31.00 here in above , but for heavy duty AIR CIRCULATING/Pedestal fan of size - 600 mm ( 24" ) , 1400 RPM, including replacement of bush / bearing of approved make, alongwith replacement of osscilating mechanism and regulator all as directed and refixing at location in unit line A/A . NOTE For Ser Item No 31.00 to 37.00.:- The super enamelled winding wire is to provided of appropriate gauge as approved by EIC.

Hanging only ceiling fan repaired or new any size and connecting up to the ceiling rose including taking down old u/s fan. (Note:- 1. if ceiling fan fel down any cause contractor will responsibal for this accident

Fixing only exhaust fan of any size / make at MD/OTM Accn in unit lines of Army Area and connecting up to the ceiling rose including taking down old u/s fan.

S&F capacitor of 2.5 MFD oil filled insulated with aluminium body after removing unserviceable condenser complete all as specified and directed.

S&F in replacement of fan motar of copper winding with capacitor of appropriate size and capacity of exhaust fan, complete all as specified and as directed.

S&F in replacement of ' Ú' clamp with rubber reel of standard quality including nut/bolt , lock nut and pin suitable for ceiling fans (any type/sweep) complete all as specified and directed.

S&F in replacement of PVC canopy upper/lower side of standard/ good quality including bolt with nut , lock nut and pin suitable for ceiling fans (any type/ any sweep and make) complete all as specified and directed.

S&F in replacement of down rod 60 cm long of 15 mm dia " heavy duty " thread type GI pipe complete with rubber bush, centre bolt , nut , lock nut ,"U" clamp suitable for thread ends connection with cotter pin complete all as specified and directed.

S&F in replacement of down rod 60 cm long of 12 mm dia " made out of high density mild steel including drilling hole for split pin complete all as specified and directed.

S&F in replacement of down rod 90 cm long of 12 mm dia " made out of high density mild steel including drilling hole for split pin complete all as specified and directed.

S&F in replacement of down rod 30 cm long of 12 mm dia " made out of high density mild steel including drilling hole for split pin complete all as specified and directed.

S&F MS U-type Hook hanger with M10x 75mm Fastners(double fastners) complete with nuts, bolts and washers for hanging Ceiling fans complete all as specified and as directed.

S&F GI pipe medium grade 40mm dia for hanging Ceiling fan any size including cutting as per site requirement and grouting with cement concrete in both ends on existing brick/stone wall complete all as specified and directed.

M&L for making hole in existing brick / stone wall for fixing exhaust/ ventilation fan, complete all as specified and directed.

S&F in replacement of fan blade as per existing including fixing screws suitable for ceiling fans 1200 mm sweep (any type/ make) complete all as specified and directed .

S&F in replacement of fan blade as per existing including fixing screws suitable up to 300 mm sweep exhaust fans (any type/ any make) complete all as specified and directed .

S&F in replacement of fan blade as per existing including fixing screws suitable for exhaust fans 375/400 mm sweep (any type/any make) complete all as specified and directed .

S&F in replacement of fan blade as per existing including fixing screws suitable for exhaust fans 450 mm sweep (any type/ make) complete all as specified and directed .

S&F in replacement of bracket with frame as per existing including fixing screws suitable up to300 mm sweep exhaust fans complete all as specified and directed.

S&F in replacement of bracket with frame as per existing including fixing screws suitable for exhaust fans 375/400 mm sweep complete all as specified and directed.

S&F in replacement of bracket with frame as per existing including fixing screws suitable for exhaust fans 450 mm sweep complete all as specified and directed.

M&L for painting of ceiling fan size - 1200 mm sweep complete with down rod and blades , cleaning , removing dirt / dust , scrapping out old paint , applying putty and painting with synthetic enamel paint first quality of approved make including writing MES No. in figure & words 25 mm wide with synthetic enamel paint of black colour on ceiling fans complete all asspecified & directed.

All as per item No 58.00 here in before but Exhaust Fans of any size/ Sweep

M&L for pvc stand for capacitor including connection etc., complete all as specified and directed.

M&L for louver made of MS sheet 3 mm thick for e/fan off sizes complete all as specified.

S&F in replacement of connecting PVC insulated copper conductor multistranded,unsheated cable of size 23/0.0076 up to the ceiling rose,lenth of cable 0.60 RM for each job, complete all as specified and directed.

M&L for attending daily complaints in repairs and maintenance of geysers, Solar water heater of any capacity/ any make, lodged by the users complete to make serviceable condition with skilled electrician for (Geyser & Solar Water Heater) including disconnecting electric and water connection of the geyser, taking down from its position on ground, dismantling geyser complete such as removing tank from its outer body , removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, testing thermostate, element , and tank from leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, thermostat, indication lamp, plug top , three core wire, rubber gasket, inner tank, split plate, outer bottom cover, apparatus plate if required (Spares parts will be measured and paid under relevant item of the Sch. "A" as a supply only) testing the geyser and installation of the geyser into its existing position and connecting all electric and water supply connection complete all as directed.

Taking down of defective geyser of any capacity from site transportation to E/M store yard for repair, strip opening for complete overhauling and ascertaining the repair/replacement (spare part shall be measured and paid seperately under respective items of Sch. "A" as supply only) & re-assembling the geyser after repair/replacement and including connect with existing electric & water connection, testing,refixing at site, complete all as specified and directed.

Disconnecting of electric and water supply connection of geyser for supply and replacement of brass chromium in-door assembly(shyphon assy) 6/9 hole for 50 Ltrs Geyser including connect with existing connections and testing, complete all as specified and directed.

Disconnecting of electric and water supply connection of geyser for supply and replacement of brass chromium in-door assembly(shyphon assy) 6/9 hole for 25 Ltrs Geyser including connect with existing connections and testing, complete all as specified and directed.

S&F in replacement of 15 mm bore, GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid in floors including cutting chases, pinning in and making good distrubed surface to match with existing surface and finish, etc., complete all as specified and as directed.

S&F in replacement of bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement of angular stop cock with wall flange, chromium plated, cast copper alloy, fancy type 15mm dia complete all as specified and as directed.

S&F in replacement of PVC connection heavy duty, nylon braided, suitable for hot water, with brass alloy chromium plated nuts and nylon washers, of size15mm bore and 450 mms long, complete all as specified and as directed.

All as per srl item No 70.00 here in-above but 600mm long.

S&F in replacement of single pole and neutral enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps, 'C' curve, complete all as specified and as directed.

Supply only for heating element (ISI-Marked) of suitable type as per existing including rubber ring clamping screws etc,complete of 1.5KW, complete all as specified and as directed.

All as per srl item No 73.00 here-in-above but 2.00 KW

Supply only for thermostate ISI-marked for geyser as per existing of range 15-65 degree temperature, complete all as specified and as directed.

Supply only for auto-cut ISI marked for geyser as per existing, complete all as specified and directed.

Supply only for steel vessel (tank)of geyser capacity 25 ltrs. as per existing type of all as specified directed by EIC.

All as per srl item No 77.00 here-in-above but capacity 50 ltrs.

Supply only for vacuum safety valve of suitable size on inlet side of geyser, complete all as specified and directed.

Supply only for brass chromium plated horizontal/vertical non return valve of size 15mm bore (ISI Marked) on inlet side of Geyser, complete all as specified and directed.

Supply only for brass nut fusible plug suitable for Geysers, complete all as specified and directed.

M&L for drilling hole in wall, grouting fastner nut and bolt not less than 100 mm long for holding geyser upto 50 ltrs in wall including making good and matching existing surface and finish all as directed.

Supply only for indicating lamp of red and green colour, for Geysers including connecting, complete all as specified and directed.

Supply only for bottom split inspection cover for geyser capacity 25 ltrs. of any make,complete all as specified and directed.

All as per item No. 84.00 here-in-above but capacity 50 Ltrs

Supply only for outer body made of stainless steel sheet for geyser capacity 25 ltrs. of any make, complete all as specified and directed.

All as per item No. 86.00 here-in-above but capacity 50 Ltrs.

Supply only for Rubber Gasket as per site requirement for 25/50 ltrs. geyser, complete all as specified and directed.

M&L for scrapping old paint and applying spray painting two coats of synthetic enamelled paint of approved quality including writing MES No. / building no. in letters of size 40 mm width. For geyser cap. - 25 ltrs of any make/type . (NOTE : Rates shall deemed to be included for taking down Geyser in location and position , disconnecting and refixing same existing postion &reconnecting electrical / water connection all as directed)

All as per item No. 89.00 here-in-above but capacity 50 Ltrs

M&L in replacement of GLASS WOOL for Geysers of any capacity, complete all as specified and directed.

S&F in replacement of MCB SP 5 To 32 AMP Amp, 10KA, complete all as specified and directed.

S&F in replacement of three pin top 20 Amp, complete all as specified and directed.

S&F in replacement of metal clad plug socket 3 pin 20 Amp, complete all as specified and directed.

S&F in replacement of metal clad plug Top 3 pin 20 Amp, complete all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L for concealed point wiring complete with 2.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit/Surface conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 2.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including piano sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of piano switch, complete all as specified and directed.

S&F in replacement of flush type Socket, 16 Amps, - 2/3 pin combined flush type, 230 Volts complete all as specified and as directed.

S&F in replacement of flush type piano Switch 1 way, 16 Amps, flush type, 230 Volts complete all as specified and as directed.

S&F in replacement of PVC insulated copper conductor 1100 volts grade circular cable of size 2.5 sqmm (50/.025) 3 core complete all as specified and as directed.

S&F for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 2.5 Sqmm and one run of 2.5 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 20 mm dia with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed. NOTE: Two runs of 2.5 Sqmm cable with one run of 2.5 Sqmm earth wire and PVC conduit shall be measured & paid for as one length.

All as per item No. 101.00 here-in-above, but cable drawn through in PVC casing-N-capping

S&F in replacement of socket outlet 2 in 1, 3 pin, 6 and 16 amp modular type ISI Marked, complete all as specified and directed.

S&F in replacement of switch modular type single pole one way 15/16 Amp ISI Marked, complete all as specified and directed.

M&L for welding/brazing steel/copper vessel ( storage water tank of capacity 25/50 ltrs ) including pressure testing and leakage testing, complete all as specified and directed.

M&L for cheking of Solar water heater system of any capacity and make installed at ARMY AREA Jodhpur, complete all as specified and directed.

De-scaling & servicing of Solar Water Heater system of any capacity and any makeincluding re-insulation and making fit for smoth function,complete all as specified.

M&L for heating element of capacity 3/5 KW ISI Mark as per existing panel length & width complete all as specified.

M&L for thermo stat ISI Marked, suitable for existing panel complete all as specified.

M&L for repair to damaged panel tubing with gas welding of Solar Water Heater of any capacity/any make, complete all as specified and as directed.

Dismantling and taking down unserviceable pressure pumps and motor of cap not more than 2 HP of any capacity and description and refixing to the position after servicing and minor repairs as refilling of pressure replacement of auto cut switch etc the job include rewinding of motor all as specified and directed.

S&F in replacement of stop Cock CP brass 15 mm bore screwed down with crutch or butterfly handle, complete all as specified and directed.

S&F in replacement of bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm- 90gms/20mm- 125gms) of Size 15mm complete all as specified and directed.

M&L for replacement of assembly bottom cover (Inspection cover) split type made of MS sheet same guage of existing cover duly painted with two coats of synthetic enemel paint over one of red oxide primer, complete all as specified and directed.

M&L for replacement of bottom cover for outer body made out of MS sheet of same guage of existing cover and size duly painted with two coats of synthetic enamel paint of existing geyser colour over one coat of red-oxide primer, complete all as specified and directed.

M&L for repair, rewinding of submersible pump monoblock type of capacity upto 3 HP, single or three phase, any make incl connection, testing complete all as specified and directed

M&L for repair, rewinding of submersible pump monoblock type of capacity upto 7.5 HP, single or three phase, any make including connection, testing complete all as specified and directed

S&F in replacement direct-on-line starter submersible pump of capacity 5 HP, 3 Phase, 415 Volt, with and including connection, testing,complete all as specified and directed.

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/S KAUTILYA GARG (BID ID -3390439)

Surendra Singh (BID ID -3383238)