E-Tender for Repairing And Maintenance replacement of defective Parts and addition And alteration of Electrical Installation at Sanchar Vikas Bhavan T AND D Building , Jabalpur under Special Swachhata Campain 2.0 . (Re-call 1 )

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required .

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required .

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required .

Suplying and fixing of following size PVC casing capping directly on wall / partition panels with screws / fasteners & drilling etc. complete as required.

20 mm x 10 mm.

25 mm x 10 mm.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit / Casing and Caping as required.

1 x 1.5 sq. mm

2x 1.5 sq. mm

3 x 1.5 sq. mm

Supplying and Fixing 100 Amp DU100H , Breaking Capacity 30 KA at 415V AC 50 Hz four Pole MCCB with Sheet Steel enclosure having space for cable termination , In-built neutral Link for TPN system , Mounting holes for easy wall mounting , Louvers for better heat dissipation i/c rotary handle direct ROM type etc. complete as required .

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs ( but without MCBs and incomer) as required. ( Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing the following rating, four poles, 415 V, TPN MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following piano type switch / socket on existing fittings / switch box / cover including connections etc. as required . ( any ISI Marked )

5/6 amps switch .

5 pin 5/6 amps socket outlet .

6 pin 15 amps combined socket outlet .

Heavy duty regulator

18 Watt LED Tube Fitting

36/ 40 Watt Flurescent Tube

40 Watt Electronic ballast

Starter for 40 Watt ballast

Side holder for Flurescent Fittings

Supplying and fixing the following items in the existing Electrical installation complete connection testing as required

Brass batten / Angle Holder

15 Watt LED Lamp

200 mm x 250 mm X35 mm depth PVC boards

4 Point Power Strip having 1 Switch , 5 Sockets

Rewinding of Ceiling Fan i/c replacement of Condenser , bearing etc.

Rewinding of Exhaust Fan i/c replacement of Condenser , bearing etc.

Supplying and fixing following items in the existing Split/window AC complete as required

Running capacitor 36-50 mfd

Capacitor for Condenser Fan

Blade set for W/Split AC unit

Blower Assembly for Split AC unit

Fan motor for Condenser unit 1.5 / 2 TR Split /Window AC

Fan Motor for Indoor unit of 1.5TR Split AC

Supplying and Fixing of Sunmica / phenolic laminated Sheet 3 MM thick suitable size on existing switch boards complete tighting with nut bolts / screws etc. complete as required .

Supplying and Fixing 230 mm x230 mm x46 mm , 22 Watt , Out put lumens 1840 Square shape Surfce Mounting LED Light Fitting which provides soft-light and glare free symmetrical illumination complete with accessories i/c interconnection testing as required . Philips or Similar Superior Make ( Model to be got approved before supplying)

Supplying and Fixing 2'x2' Square shape Surface Mounting slim LED Light 36 w Fitting which provides soft-light and glare-free symmetrical illumination complete with accessories i/c interconnection testing as required. Philips or Similar Superior Make. ( Model to be got approved before supplying)

Supplying and Fixing Round /Squar Shape 18 Watt LED Surface type fitting i/c connection wiring testing as required. Philips or Similar Superior Make. ( Model to be got approved before supplying)

Supplying and fixing of 230 V & 50 Hz AC supply operated 400 mm sweep wall bracket fan with suitable speed regulation and oscillation control switches including making suitable fixing / mounting arrangement along with inter connection etc. complete testing as required. [ Bajaj / Crompton / Havells or similar superior make ]

Supplying and Laying of one number PVC insulated & PVC sheathed / XLPE 4 x 16 sq mm Alumn Conductor power cable (ISI Make) of 1.1 kV grade in the existing masonry open duct / Open Air / RCC/ HUME/ METAL pipe / wall surface as required.

upplying and Laying of one number PVC insulated & PVC sheathed / XLPE 2 x 6 sq mm Alumn Conductor power cable (ISI Make) of 1.1 kV grade in the existing masonry open duct / Open Air / RCC/ HUME/ METAL pipe / wall surface or in recess / direct in ground as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4x16 sq. mm (28mm)

2x6 sq. mm (28mm)

Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit / submain wiring / cable as required.

Supplying and Fixing 50 W LED 6500 K Street Light fitting with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance . LHEXAYP7PN6K050 , Havells or Similar Superior Make .

Supplying and Fixing 25 Watt LED post-top energy saving , environmental friendly, long life with symmetrical light distribution including inter connection complete testing as required . ( RUBYPT25WLED757SSYMTOPC ) Havells or Similar superior make

Making pole foundation with 1:2:4 ( cement:coarse sand: stone aggregate 20mm nominal size) including centering, shuttering , plastering, painting etc. complete as required.

Supply and fixing of MS weather proof box ready made suitable knockout for compound light pole, locable hinged front cover , having Suitable size of backelite sheet , 6A SP MCB - 1 No., Din Bar, 8 Way connector etc. complete as required.

Supplying and fixing MS Bracket bend at 120 degrees Suitable size of dia & suitable length for Street Light fittings on tabular Steel Pole including Clamping /welding with nut bolts etc. complete as required.

Providing and Making Painting of Street light poles maximum height length upto 7.5 Mtrs long after scrubbing the rust from pole with one coat Epoxy Primer & 2 coat of MRF charcoal PU Paint i/c sign writing pole number , Supply of all materials , labour and matching with exhisting colour pole etc. as directed by the engineer in charge etc. complete as required .

servicing of Window / Split AC unit i/c greasing of Fan motor, replacement of bush / bearing of fan / blower Motor, cleaning of condenser coil with caustic soda, washing of filters i/c removing and refixing AC unit, testing etc. as required.( This item is to be executed when required essentially )

Gas Charging / Toping with Refrigerant Gas R - 22 etc. complete testing as required.

ATUL TRADERS &CONTRACTOR PROP-ATUL MISHRA