Construction of Sub Tehsil office at Mandap in Tehsil Dharampur Distt. Mandi

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification 2014 clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 440.82cum (four hundred forty decimal eighty two ) cubic metre @ Rs. 300/- (Rupees Three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m ( one point five metre) in width or 10 sqm ( ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,( one point five metre) including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

In foundation,footings bases of columns etcetera and mass concrete.

In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platform and the like floor upto any thickness upto all floor levels.

In columns, pillars posts and struts square rectangular or polygonal in plan up to all floor levls

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels

Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses and the like in all floor heights.

Stair Case with sloping or stepped soffits excluding landing except spiral stair upto all floor level.

Providing and laying in position cement concrete of specified grade mechanically mixed and vibrated cement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specification and curing complete but excluding cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten) graded crushed stone aggregate 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) up to all floor height excluding the cost of centering, shuttering and finishing in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying reinforced cement concrete mechnically mixed vibrated design mix M-20 (twenty) design mix grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed vibrated design mix M-20 (twenty ) design mix grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, for attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level to all floor levels excluding cost of centring shuttering finishing including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement M-25 cement concret work obtain minium crushing strenght of 25 N/mm2 ( Twenty three) Newton per millimetre square)with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix, upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Mild steel and Medium Tensile steel bars Fe 500D made of SAIL,TISCO, TATA, for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding bars all complete upto plinth level including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls, retaining walls and Breast walls with 110mm (One hundred ten millimeter) diameter PVC Pipe made of D-plast finolex having working pressure not less than 4.50 Kg P/Sq cm (four point five Killogramme per Square centimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty) (Horizontal) towards drawing face complete up to all height as per drawing and technical specifications clauses 614, 709, 1204.3.7 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:3( One cement: three coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm ( one hundred fifty/ two hundred thirty / three hundred millimetre ) thick AAC blocks in super structure above plinth level up to all floor level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be madefor seperately). including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : Twelve graded stone aggregate 20(Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Six sand) and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and MORD technical specifications 2014 as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm ( one decimal six zero plus/minus zero point two millimetre)thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) ( four hundred into ninteen into one point nine millimetre) made of (big series)frame 67 x 60 mm ( sixty seven into sixty millimetre) & sash 67 x 80 mm ( sixty seven into eighty millimetre)both having wall thickness of 2.3 ± 0.2 mm ( two point three plus / minus zero point two)and single glazing bead / double glazing bead of appropriate dimension. (For single glazing 4 to 6 mm ( four to six millimetre) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). seasoned SAL wood Ist quality size 125x75 mm ( one hundred twenty five into seventy five millimetre) including entire carriage of material with in all leads lifts with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 35mm ( Thirty five ) millimetres thick ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type ,core of block board construction with frame Ist class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 4 mm ( four) millimetres thick glass panes with putty and glazing clips in UPVC doors , windows, clerestory windows all complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 12 mm ( twelve) millimetres thick glass panes with putty and glazing clips in UPVC doors , windows, clerestory windows all complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 1st class deadar wood beading 62X19 mm including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 250×16mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

250x10 mm ( two hundred fifty into ten millimetre)

200x10 mm ( two hundred fifty into ten millimetre)

150x10 mm ( one hundred fifty into ten millimetre)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

125 mm (one hundred twenty five millimetre)

100 mm (one hundred millimetre)

75 mm ( seventy five millimetre)

Providing and fixing 75mmx625mm rounded hand rails in straight lenth complete in 1st class indian teak wood including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying antiskid vitrified floor tiles Ist quality of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan 600 x600x 10mm. (three hundred into three hundred into eight milimeters) size in skirting base of cement 12 mm mortar 1:4(one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying Ceramic floor tiles of size 300 x 600 mm of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan of 1st quality conforming to IS : 15622, of pproved make, in all colours etc., complete floor tiles Ist quality of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan in skirting /dedo on base of cement 12 mm mortar 1:4(one cement: four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying cobble stone / local cut stone / red sand stone slab in 20mm average thick cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c preparing of nosing i/c rubbing and granite polish finish complete including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying digital white glazed tiles of size 300x450 mm ( three hundred into four hundred fifty millimetre) of NITCO/AGL Tiles or more (thickness to be specified by the manufacture) of Ist quality conforming to IS:15622, of approved make in colours etc. complete including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying black finished Granite stone flooring of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in desgn and patterns, in landing of stair as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twenty millimetre)(average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor level as specified and as directed by the Engineer-in-Charge including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying 40 mm thick Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing prepainted sheet roofing with top skin of 0.60 mm (Zero point six)millimetres thick prepainted steel sheet over steel trusses made of cold rolled steel coil with epoxy coating of 25 (twenty five)micron having a puff depth of 50 mm ( fifty millimetre) and weightr of puff 35-37 cum ( thirty five to thirty seven)steel frames are to be painted of approved shade i/c fixing with screws prepainted iron J or L hooks, bolts and nuts with prepainted limpet and rubber washers complete with all accesories as required including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ridges or hips 60cm ( Sixty centimetre) overall with 0.60mm ( zero point six zero ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5( five) microns primer coating + bck coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I limpet and bitmen washers complete with all accessories as required including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 30(Thirty) Centimetres wide 30 (Thirty) Centimetres overall semicircular 0.63 (Zero point six three)millimetres thick plain G.I. sheet gutter with iron brackets 40x3mm ( forty into three millimetre)size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 1.66 mm to 2.00 mm (One point six six to two Millimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely). including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing on wall face unplasticised Rigid PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592) for rain water pipes of working pressure not less than 4.00 ( four kilograme/square centimetre ( four point zero zero kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid uPVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

110mm (One hundred ten millimetres) nominal size PVC bend

110mm (One hundred ten millimetres) nominal size PVC Shoe

Providing and fixing 110 mm ( one hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty intoFifty into Fifty) millimetres hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ACP tiles ceiling with (frame work to be measured and paid for separately) including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections, made of SAIL, Tisco, Rin, Jindal, Pather of (JSPL) Shyam Steel in Gratings, framed guard bars, Ladders, railings , Brackets and Similar work , including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections made of TATA, Trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. upto all floor level in all heightscomplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Steel work in built up tubular sections made of TATA(round, square or rectangular hollow pipes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete upto all floor level in all heights complete including entire carriage of material with in all leads , lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. .

Providing and fixing 19mm x19mm & 12X12mm ( Ninteen into ninteen and twelve into twelve ) millimetres MS solid square bar (ballusters) with MS flat of 37.5mmx5mm (Thirty seven point five into five )millimetres size complete with a applying priming coat of red lead paint as per drawing specification including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :three sand) upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

6 mm (Six millimetre) thick cement plaster cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

15mm (fifteen) millimetres Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty)millimtresin girth and finished even and smooth cement mortar 1:3(One cement :three sand) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make after and including preparing the surface throughly cleaning oil grease, dirt ,dust and other foreign matter and sand papering and knotting with ready mixed paint brushing with white lead for primering of Nerolac , Berger (Bison Acrylic) Asian Paints (Tractor, Acrylic), Shalimar. make upto all floor levels complete as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Finishing with Deluxe Multi Surface Paint system for interior or exteriors using primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make Painting wood work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero litres per ten square metres) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero litres per ten square metres) of approved brand and manufacture including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (three point eight four kilograme per ten square metre) of required shade preparation of surface, as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make etc. complete on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Finishing withTwo or more coats applied on walls @ 1.25 ltr/10 sqm ( one desimal two five litres per ten square metres) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zero desimal seven five litres per ten square metres) premium acrylic washable emulsion paint of approved shade of asian paint / Nerolac paint Dulux paint system for interiors and exteriors using Primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Distempering with Synthetic/Acrylic distemper of asian paint / Nerolac of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

White washing with lime on undecorated wall surfaces two coats to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter complete upto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. ..

Providing and applying white cement based putty of average thickness 1 mm (one) millimetres of approved brand and manufacturer JK wall putty/ Birla white Putty make over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Garsa (Kullu) stone slab 12.5mm.(twelvepoint five ) millimetres cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm.(twelve)millimetres Thick cement plaster 1:3(one cement:vthree sand) and jointed with cement slurry i/c scaffolding etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 15(fifteen) millimetres nominal bore to external work and floor galvanised mild steel tubes ( heavy grade) made of B.S.T., Jindal (Hissar), Tata Steel Tubes Ltd., Prakash Surya tube fitting and clamps including making good the walls, ceiling and floor including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and laying in trenches galvanised mild steel tubes 20 mm (Twenty milimeter) JINDAL(HISAR)/ TATA STEEL TUBE LTD ( heavy grade )tube fittings (earth work in trenches to be measured and paid separataly) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm ( fifteen millimetre) dia nominal bore JINDAL(HISAR)/ TATA STEEL TUBE LTD ( heavy grade )tube fittings (earth work in trenches to be measured and paid separataly) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Making connection of galvanised steel distribution branch with galvanised mild steel mian 25 to 40 (Twenty five to forty )millimetres by providing and fixing tee including cutting as threading the pipes complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one ) metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

1216 (16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for cold water supply,capable to withstand temperature up to 80°C (eighty) degree centigrate , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge .including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

External work 1216 (16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))

Providing and fixing :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundered eighty into four hundred forty)millimetres with integral type foot rests water closet squatting pan of Hindware or its Equivalent (Indian type W.C. pan ) with 100 mm (One hundred)millimetrs sand cast Iron P or S trap, 10 (Ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required .including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing white vitreous china flat back large no 5001or wall corner type lipped front urinal basin of 430x260x350 mm (four hundred thirty into two hundred sixty into three hundred fifty millimetres and 340x410x265 mm (Three hundred forty into four hundred ten into two hundred sixty five)millimetres sizes respectively with automatic flushing cistern in whiteshade of Jaquar/ Hindware /Cera with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :one urinal basin with 5(five) litre white P.V.C.automatic flushing cistern .including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing White shadevcascade nxt C0404 wash basinwash basin in whiteshade of Perryware/ Hindware /Cera , with C.I. brackets, 15 mm ( fifteen millimetre)C.P. brass pillar taps, 32 mm ( thirty two millimetre ) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require .including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and fixing 32 mm (thirty two milimetre) dia P.V.C. waste pipe Finolax make for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government..

Providing and Fixing Soap dish stainless steel CAN -1531of Jaquar complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 600 mm ( six hundred) millimetre long towel rail width 78 mm ( seventy eight millimetre) and effective height of 88mm ( eighty eight millimetre) weight not less than 190 gms (one hundred ninety grams)of Kingstone, Gem, Parko, Techno, Jal, ESS, Seiko, Modi ,JAQUAR make including entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 100 mm(one hundred)millimetres cromium plated grating JAL, ESS-ESS of superior quality for floor, gully or nahani trap complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing CP brass bib tap 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing C.P. brass bib cock of 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing plasticised PVC connection pipe Finolex make with brass unions 450mm ( four hundred fifty millimetre) length 15mm (fifteen millimetre) nominal size upto all floor level. including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing ball valve (brass) JAL, ESS-ESS of approved quality, High or low pressure, with plastic floats complete complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

15 mm (fifteen millimetre)nominal bore

20 mm (twenty millimetre)nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points JAQUAR, JAL-ESS or equivalent of approved quality conforming to IS:8931 complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing 25 mm ( twenty five millimetre) nominal dia Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Brass full way valve with C.I. wheel of approved quality (screwed end)

Providing and fixing 1000 (One thousand ) litres net capacity tank PVC water storage tank of Sintex three ayer make (I.S.I. 12701 marked tripple layer) G.I. inlet or out let connection15mm (Fifteen) millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all floor level above ground level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing 110 mm x 75 mm (one hundred ten milimeters into seventy five millimeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. marked of self cleaning design including fixing with approved adhesive including cost of cutting and making goods the walls and floors etc. complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing, laying 110 mm diameter and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and laying 100 mm ( one hundred millimetre)diameter S.W. pipe cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes FINOLEX / SUPREME ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

75 mm (Seventy five millimetre) diametre

110 mm (one hundred ten millimetre) diametre

150 mm (one hundred fifty millimetre)diametre

Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (Three) millimetres thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

110 mm (one hundred ten millimetre) diametre

150 mm (one hundred fifty millimetre)diametre

Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing 110mm (one hundred ten millimetre) dia PVC double equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing PVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

I) 110mm (one hundred ten millimetre) dia

II) 150mm (one hundred fifty millimetre) dia

Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred into one hundred millimetre ) Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing Exhaust fan ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Providing and fixing square-mouth S.W. gully trap class SP-1(one) complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilograme) and frame to be not less than 2.70 kg (two point seven zero kilograme) as per standard design:100x100 mm (one hundred into one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt

Supplying fixing C.I. cover without frame for manhole required shape and approved quality rectangular shape 455x610 mm (four hundred fifty five into six hundred ten milimetes) light duty the weight not less than 23Kg ( twenty three kilograme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 (seven desimal five) masonry Chamber 60x60x75 cm (Sixty into sixty into seventy five) centimetres inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm (one hundred)millimetres top diameter, 160 mm(one hundred sixty)millimetres bottom diameter and 180mm (one hundred eighty)millimetres deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20mm(twenty)millimetres nominal size , i/c necessary excavation, foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm(forty)millimetres nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve) millimetres thick, finished with a floating coat of neat cement complete as per standard design :including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size) inside plastering 15(Fifteen) millimeters thick with cement mortar 1:3 (One cement : three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two sand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 900mmx800mm and 800mm (nine hundred into Eight hundred into eighthundred milimeters) deep including C.I. cover with frame (Light duty single seal : Pattern) -I 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three sand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Constructing masonry Chamber 60x60x75cm (Sixty into sixty seventy five Centimetyres) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm (one hundred sixty) millimetres bottom diameter and 180 mm (one hundred eighty) millimetres deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20mm (Twenty millimetres) nominal size , i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40 mm (forty) millimetres nominal size) and inside plastering with cement mortar 1:3 (one cement :three coarse sand) 12 mm(Twelve) millimetres thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 (seven desimal five) millimetres including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Santosh Kumar

Anagya Verma Consulting Private Limited