Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC 52 B MUKTAPUKUR NATUN PALLY 24 PGS N PIN 700123 | NORTH 24 PGS | WEST BENGAL | 700123 | L1 | Accepted-AOC The lowest bidder(L1) | |
| 2 | L2₹17.2 L+₹34,998.60 (2.08%)Rejected-AOC RAMAKRISHNA COLONY PO MAJHIPARA DIST 24 PARGANAS NORTH PIN 743145 STATE WEST BENGAL | 24 PARAGANAS NORTH | WEST BENGAL | 743145 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹17.4 L+₹57,401.80 (3.40%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹20.2 L+₹3.3 L (19.5%)Rejected-AOC | L4 | Rejected-AOC Other than the lowest bidder | |
| 5 | L5₹20.9 L+₹4.1 L (24.0%)Rejected-AOC | L5 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹19.8 L
EMD Value
₹39,600
Closing Date
3 May 2021, 6:00 pmClosed
CWE
Commander Works Engineers (Sub) Military Engineer Services PO- Barrackpore Dist- 24 Pgns (N) Kolkata- 700120 (W.B)
SPECIAL REPAIRS TO FENCING IN SRI KANCHRAPARA AT KANCHRAPARA MILITARY STATION UNDER GE BARRACKPORE.
2021_MES_435604_1
CWE/BKP/04 OF 2021-2022
Open Tender
Miscellaneous Works
Item Rate
180 days
GE BARRACKPORE
CLASS E CATEGORY a i
6 documents required · 6 mandatory
₹500
GE BARRACKPORE
₹39,600
Yes
18 Jun 2021
10 Apr 2021
5 May 2021
10 Apr 2021
3 May 2021
28 Apr 2021
Amount
Dismantling RCC post any section embeded in natural ground or in cement concrete including taking out embeded portion and making good to disturbed surfaces and all as directed.
Dismantling old barbed wire of any description including taking out hooks etc. and all as directed.
M&L for Plain Cement Concrete 1:4:8 type D2 (using 40mm gradeed stone aggregate) as in foundation filling as mass concrete or in sub base of floors complete all as specified and as directed.
S& F for mild steel angle iron as in fencing fixed independently for wire etc and in similar work all as specified & directed.
S&F for mild steel screws bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw end to be fitted with one washer and one hexagonal or square nut length of bolt exc 05 cm but n.exc 10 cm long and dia of neck 11 to 15 mm complete all as specified & directed.
S&F for mild steel flat iron of size (40 x 6) mm for securing wire mesh as in fencing post including necessary drilling holes complete conforming to Fe. 290 Gde E-165 complete all as specified & directed.
Supply only mild steel round bar 10 mm dia hooking ends fixed independently with chain link fencing as strengthening bar
M&L preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade, over one coat of red oxide primer complete all as specified & directed.
M&L preparation of new steel sufaces of any description not exc. 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade, over one coat of red oxide primer complete all as specified & directed.
Supply only chain link fencing with 4 mm dia made up into mattresses with mesh of size 100 mmx 100mm
Labour only for fixing galvanised chain link fencing with 4 mm dia made up into mattresses with mesh of size 100 mmx 100mm and fixing of 10 mm dia MS round bars and straining including provision of binding wire complete all as specified & directed. (Note- 10 mm dia MS round bar shall be measured and paid separately)
S&F for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2.00 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins etc. as directed. Note:- Each line wire to be measured)
Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided all as specified & directed.
Demolition of Brickwork or stone/boulder masonary, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.
Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth; for foundation etc. not exc 10 sqm on plan and getting out in soft/loose soil complete all as directed.
Returning, filling, including spreading, levelling, watering and well ramming in layrs not exc. 25cm in soft/loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point as directed.
M&L for RCC type B-1 1:2:4 (using 20 mm graded aggregate) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
All as per Srl item No 18 here-in-above but as in columns, pillars, piers, posts and struts etc. complete all as specified and directed.
All as per Srl item No 18 here-in-aboveas in beams, cantilever, bressummeres lintels over 1.50m spam complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.
Form work to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( flat ) complete all as specified and directed.
M&L TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, as in stirrups/ spacer hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified and directed.
All as per Srl item No 26 hare-in-above but except bricks complete all as specified and directed Note:- Old serviceable bricks shall be obtained from Srl item No 14 here-in-before.
M&L rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed
M&L preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coats of cement base paint complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided.
S&F framed work such as grills, gratings, etc. with end of bars shouldered and or riveted, or forged into spikes; framed guard bars;; barred iron doors; ladders; framed work of water tanks and similar work confirming to FE.290.gde-E-165 and similar works complete all as specified and directed.
R.S. COMPANY
M/S. ARUP KUMAR DEY
PUNAM ENTERPRISE
INDUSTRIAL CONSTRUCTION
SWASTI ENTERPRISES
KOLAY CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .