SPECIAL REPAIRS TO JCOS SINGLE LIVING ACCN BLDG NO P- 292 ROOM NO 06 TO 10 AND ROOM NO 16 TO 20 AT EME SCHOOL VADODARA.

Amount

Demolition of brick/stone massonry work built in cement mortar including all quoins, arches, pillars etc complete all as directed.

Material & labour for brick work with sub class B old size bricks built in CM (1:6) straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M & L for brickwork with sub class ‘B’ old size bricks straight or curved to any radius in half brick thick walls built in CM 1:4

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each

-Ditto- as per item No 4 above but area n.exc. 1.5 Sqm each

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick veneered on both side with decorative choice laminate type 1 (factory laminated), including 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

M&L for 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauze, etc edges of trimming plain chamfered or rounded fitted with cut and metered beads for securing/ gauge etc sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) and all as specified.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S & F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete all as specified and directed.

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of Enginer in Charge and as per Manufacturers's speciifcations

S & F SS W Hinges SS 202 Grade steel Rust Resistance , for fixing cup boords shutters sizes of hinges 3" to 4" and 1.5 mm thickness, suitable for 18 mm thick cabinets shutters complete all as specified and directed

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished supplied and fixed.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.

S & F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc and all as specified and directed

S & F aluminium anodized hasp and staple of size 100mm long, safty type complete all as specified and directed

S & F magnetic ball catcher of suitable size for cup board shutter all as per sample kep in GE's Office complete all as specified and directed

S & F adjustable door spring capsule type of medium size all as per sample kept in GE's Office complete all as specified and directed

S & F in repairs aluminum door seal of suitable section fixed to door shutter with screw complete all as specified.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., Fe-290 (Gde E-165) complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F of Powder coated aluminium window/ventilator shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws and grill etc as per manufactures instruction & trade pactice. Note:- Aluminium members shall only be measured for payment.

Supply and fix sheet glass 4 mm thick oridinary quality and glazing with rubber packing to sliding windows/ventilators in square exceeding 0.50 sqm in each pane.

Supply and fix figured glass 4 mm thick pin headed type and glazing with rubber packing to sliding windows/ventilators in square not exceeding 0.50 sqm in each pane.

Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level).

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.18sqm and n. exc 0.38 sqm as in skirting etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering as in vertical serfaces of wall finishes with CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for glazed ceramic coloured wall tiles in vertical surface 300x 200/350x250/450/350mm &7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering on in vertical serfaces of wall with CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge)

M & L for 18 to 20 mm thick machine cut green marble stone in single piece in riser of steps, skirting, dado, window (Jambs/Cills), and pillar etc laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 4 complete all as specified

M & L for 18 to 20 mm thick machine cut green marble stone as in flooring, in steps in single piece over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed with cement mortar 1 : 6 complete all as specified

Taking down cement plaster from brick/concrete surface including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M& L for 15 mm thick rendering in cement mortor 1:6 on brick work or concrete surface on wall finished even and smooth without using extra cement complete.

M & L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 complete all as specified and directed. (Note : WPC shall be measured & paid separately)

Supply only water proofing compound.

M & L for rendering 10mm thick on brick or concrete surface of ceiling in cement mortor 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.

M & L for prepartion newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for prepartion old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M& L complete removal of existing treatment on wall surface and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M & L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distemper over a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed.

M&L for preparation of newly wooden surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks of galvanized wire staples and wooden beading.

S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod as directed

S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth for bore of pipe 15/20 mm complete all as specified.

Taking down steel tubing and connection including cleaning for refixing the same in new or old position all as directed of following size fixed on wall and ceilings:

15mm dia

20mm dia

S & F galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape all as specified.

15mm dia

20mm dia

S&F in repairs 60cm long CP Brass 20mm dia tubular towel rail with flanged. ends.

S & F in repairs C.P grating of size 150 x 150 mm.

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete all as specified.

S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps but incl brackets, incl CP waste coupling all as specified.

Supply and fixing CP Centre hole Wash Basin mixer 15 mm bore pipe complet all as specified.

Supply and fix PVC (SWR) Floor trap of size 75mm setting and jointing with solvent cement.

Supply and fix PVC (SWR) Gully trap of size 125/110mm setting and jointing with solvent cement.

S & F in repairs 15 mm bore CP stop cock/Angle cock cast copper alloy,fancy type screwed down high pressure with capston head screwed for iron pipe

S & F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete all as specified.

S & F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed.

S & F in repair Toilet Paper holder of chromium plated fixed to all with chromium brass screw complete all as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed.

S & F in repair 15 mm bore MS chromium plated shower rose of size 125 mm heavy grade with accessories complete all as specified.

S & F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete all as directed.

S &F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottom and cover mild steel chromium plated or aluminium anodised hinging device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes completed all sepecified and directed.

Dismantling of water storage tank of 500 ltrs capacity.

Supply & fix rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 500 litrs capacity hoisted and fixed in position all as specified and directed

Supply & Fix in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and directed.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete all as specified and directed.

PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.

PVC (SWR) pipes, 75 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete

PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete

PVC (SWR) bends with access door suitable for 75 mm mm bore pipe fixed complete.

PVC (SWR) bends with access door suitable for 100 mm mm bore pipe fixed complete.

S & F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete all as specifed and directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in coping, bed plate for hold fast etc including necessary form work etc complete all as specified and directed.

Repairs by brushing of treatment to reinforcement by application of corrrosion resisting coat in two coats, suitable time to be provided between coats according to manufacturers instructions to resist further deteroriation of reinforcement etc complete as per intruction of Engr- in - charge. Make Fosroc/piditlite or equivalent

Repairs by application of approved epoxy based bond coat on concrete surfaces or sound bonding of cold and new concrete surfaces according to instructions of Engineer in charge .Make Fosroc/ pidilite or equivalent

Making of profile of structral memebers with polymer modified mortar in damaged areas 1:3(Cement:sand) mortar with 5 -10percentage addition of latex polymer,w/c ratio of 0.35 in 20 mm thk layers / including leveling etc complete . Make Fosroc/ Pidilite or equivalemt

Material and labour for complete removal of loose/ cracked concrete including reinforcement if required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of reinforcement ( including reinforcement) if required complete and applying 3 coats of white wash / 2 coats of cement base paint to match with existing surfaxes as directed by engineer in charge complet( Note reinforcement will be measured and pai seperately under respective items)

Material and labour MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/ Binding/ hooping of coloumns/hooking ends and binding with and including MS wire ( annealed) not less then 0.9 m dia or securing with clips complete

M&L for sunken treatment of WC/Bath with polymeric membrance (APP based) with non woven polyster mat as reinforcement including water tightness test with filling of water for continuous 48 hours with following :-

Demolition of existing PCC /lean concrete including floor tiles and removing rubbish off the premises.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound @2% by weight of cement plaster surface should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for providing & laying APP based polymeric membrance of weight of 3 kg/sqm with non woven polyster fibre as reinforcement over a coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions complete all as specified and as directed..

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.

M & L for 25 mm thick cement concrete in flooring type B0, 1:2:4 (12.5mm graded stone aggregate) with water proofing compound @3% by weight of cement for laying floor tiles. Note (WPC will be measured and paid separately).

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixtures such as switches sockets, ceiling rose, fan regulators, etc ( except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:-

One light point controlled by one switch.

One ceiling fan point controlled by one switch and fan regulator.

One exhaust fan point controlled by one switch.

One bell point controlled by one bell push

One 3 pin socket outlet 5 Amps independent board.

One 3 pin socket outlet 5 Amps on the same board with other switch.

M&L for Sub main wiring with two runs or 2.5 sqmm FRLS single core PVC insulated inshethed single core cable 1100 Volts grade, multistranded with copper conductor (ISI Marked) drawn through and including rigid PVC casing and capping ISI Marked medium grade with all connected accessories on wall/floors etc wth one run of 2.5 sqmm FRLS single core multistranded copper conductor as earth continuity conductor complete including taking down old sub main wiring and cutting of chases where as required and making good all disturbed work to match thhe existing all as specified and as directed by Engineer-in-Charge. Note : Two runs of single core 2.5 sqmm and one run of 2.5 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S & F switch piano flush type SP one way 6 Amp.

S & F for Bell push, flush type, 5 amp

S & F for switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F for switch socket combination 2 in in 1, 5 A flush type.

S & F for Socket outlet 2 in 1 , 3 pin, 6 Amps flush type.

S & F ceiling rose surface polycarbonate body three terminal.

S & F LED lamp 9W, 230V, AC, 50Hz single phase including backlite batten holder and lamp with all fitting fixing accessories complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the laminated sheet complete.

S & F of ceiling fan complete with blades, down rod from existing roof / trus to fall ceiling, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed. Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard .

S & F for Bell, AC, 230 volts, single pole complete all as specified and directed

Supply and fix of LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable light fitting complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable light fitting complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable existing light fitting complete including taking down old unserviceable light fitting complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering Steel complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 300mm including cutting of suitable size holes on existing wall and making good disturbed work to match the existing surfaces and exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in Charge.

Sub main wiring with two runs or 4.0 sqmm FRLS single core PVC insulated unshethed single core cable 1100 Volts grade, multistranded with copper conductor (ISI Marked) drawn through and including rigid PVC casing and capping ISI Marked medium grade with all connected accessories on wall/floors etc wth one run of 4.0 sqmm FRLS single core multistranded copper conductor as earth continuity conductor complete including taking down old sub main wiring and making good all disturbed work to match thhe existing all as specified and as directed by Engineer-in-Charge. Note : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and casing and capping with accessories shall be measured as one length.

Sub main wiring with FRLS four single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694 marked, of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including two runs of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. Note : Four runs of single core 6.0 sqmm and two run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S & F MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete all as directed by Engr-incharge.

S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed

S & F incl connecting MCB single pole, having rupturing capacity 10KA, 6 amps to 32 amps as ordered 240 Volts

S & F MCB Single pole and neutral (SPN), having rupturing capacity 10KA, 240 V 40 amps as ordered.

S & F MCB Triple pole and neutral (TPN), having rupturing capacity 10KA, 240 V 63 amps as ordered.

S & F of LED street light coolwhite fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed by Engr-in-Charge. (highly efficient LED street light made of pressure die cast aluminium housing with high power LEDs, Lens & toughened glass, IP66 and model no HLSLD-09H-25-CWL-R)

Taking down existing earthing and M & L Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including necessary excavation and earthwork in any earth strata and testing on completion

Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection pipe etc complete all as specified and directed

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/taking out/laying of cables/stay/strut etc for shafts, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete

Removing excavated material (soil) at a distance n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete

Returning filling in excavated approved soil including spreading, leveling, watering and well ramming in layers n.exc 25cm in soil completed all as specified and directed

Supply and laying dry fine sand of best available quality as sand cushioning to UG cable punned as specified complete all as specified and directed. Note :-Punned thickness shall be measured and paid.

M & L for Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks as protection cover of cable laid, complete all as specified and directed.

Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVCtape armouredwith galvanised steel wire or tape and overall PVC sheathed 25 sq. mm 4 Core nominal cross section in service connections .

M&L for galvanized steel tubing light Grade of 40 mm dia as protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Supply and laying in repair 50 mm bore of pipe GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc laid in trenches complete all as specified.

Supply and laying in repai 20 mm bore of pipe GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc in trenches complete all as specified.

S & F in repair 50 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S & F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

M & L for cutting existing steel tubing for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc up to 50 mm dia

Shree Vaishno Enterprises

Parul Enterprise