PROVN OF 2 X SINGLE OFFICERS ACCN UNDER GE DEHRADUN

Amount

Excavating in trenches in any type of soil , n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and diirected.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and diirected.

M & L for RCC M-25 Design mix {using 20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass concrete complete all as specified and directed.

M&L for RCC M-25 Design mix {using 20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and diirected.

M&L for RCC M-25 Design mix {using 20 mm graded stone aggregate) in beams,cantilevers,wall bends, bressummers, lintels over 1.5m span complete all as specified and diirected.

M&L for RCC M-25 Design mix {using 20 mm graded stone aggregate) in Chajja complete all as specified and diirected.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

Ditto as per item No 7 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface complete all as specified and diirected.

Use & waste of formwork to sides of pillers, posts, struts, piers, columns and stanchions etc for fair finished surfaces of concrete complete all as specified and directed.

Use and waste for Formwork to sides and soffits of floor or roof beams, wall bend beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface complete all as specified and diirected.

Use & waste of formwork to slab, chajjas, etc for fair finished surfaces of concrete complete all as specified and directed.

M&L Formwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all not exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and diirected. Note: The ATT work shall be carried out through speciallised agency as approved by GE in writing and chemical used shall be approved before execution of work.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified Note: The ATT work shall be carried out through speciallised agency as approved by GE in writing and chemical used shall be approved before execution of work.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and diirected. Note: The ATT work shall be carried out through speciallised agency as approved by GE in writing and chemical used shall be approved before execution of work.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and diirected. Note: The ATT work shall be carried out through speciallised agency as approved by GE in writing and chemical used shall be approved before execution of work.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and diirected. Note: The ATT work shall be carried out through speciallised agency as approved by GE in writing and chemical used shall be approved before execution of work.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete all as specified and diirected.

M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in1:4 complete all as specified and diirected.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and diirected.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and diirected.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, staging for water tanks, gusset plates etc. conforming Fe-290 (Gde E-165) complete all as specified and as directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O long complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls/chajja covering etc fixed with self tapping screws as complete all as specified and diirected.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge /covering/ cladding to wall, fixed with self tapping screws complete all as specified and diirected.

S&F for false ceiling with Everest Fibre Cement Designer tile Ivory painted (High pressure steam cured) of 6mm thickness (as per IS: 14862) of size 595 x 595 mm and any one of the design (Ocean, lake & hill, cascade or electra ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15 x 32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15 x 32 mm made of 0.30 mm sheet, 1200 mm long spaced between main "T" at 600 mm c/c to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 15 x 32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 15 x 20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making , opening for services like diffusers, grills, light fittings, fixture, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3 mm dia with galvanised butterfly level clips, spaced at 1200 mm c/c along centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/Sqm, complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and diirected.

M &L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of wall and applying interior grade wall care putty 1 mm thick to make the surface smooth complete all as specified and diirected.

M&L for preparation of wall and applying exterior grade wall care putty 1 mm thick to make the surface smooth complete all as specified and diirected.

M&L for applying two coats of oil bound distemper on prepared surface of wall complete all as specified and directed.

M&L preparation of new plastered surfaces of external wall and applying two coats of 1st quality exterior emulsion weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed.

S&F in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm

S & F in repairs aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

S&F Factory made 100% solid wood plastic composite ( WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single etruded process) material with density 780 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity complete all as specified and diirected.

S&F 28-30mm thick moulded WPC factory made 100 % solid ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 600 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity complete all as specified and diirected.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and diirected.

S&F 150 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and diirected.

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and diirected.

S&F 125mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and diirected.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and diirected.

S&F stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and diirected.

M&L for preparation of newly steel surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and diirected.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and diirected.

M&L for 25 mm thick PCC 1:2:4 type B-1 ( using 20 mm graded aggregate as in floor/ sub base complete all as specified and directed.

M & L non Skid ceramic coloured tiles 7-8 mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and diirected.

M&L glazed ceramic coloured tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and diirected.

M & L double charged vitrified tiles 8-10 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and diirected.

All as per item No 51 above but in dado and skirting fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and diirected.

Cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth fcomplete all as specified and diirected.

S&F vitreous chinaware wash down water closet pan padestal pattern white with seat cover, fixing bolts, jointing to flushing cistern and flush pipe anti syphonage pipe including Jet spray etc complete all as specified and diirected.

S&F 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and diirected.

S&F chromium plated stop valves/ angle valve/ concealed angle valve etc, cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified and diirected.

S&F 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and diirected.

S&F 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and diirected.

S&F vitreous china padestal wash hand basin, white flat back, size 580x450mm excluding taps, waste pipe chain and plug and porcelain but including brackets complete all as specified and diirected.

S&F Brass chromium plated wall mixer 15mm bore complete all as specified and directed.

S&F CP central hole basin mixer fancy type 15mm dia complete all as specified and diirected.

S&F brass chromium plated ovehead shower 100mm dia with shower arm complete all as specified and diirected.

S&F galvanised steel water tubing medium grade with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and diirected.

S&F galvanised steel water tubing medium grade with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and diirected.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks, three layered (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified and diirected.

M & L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection, finished even andsmooth without using extra cement complete all as specified and diirected.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and diirected.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and diirected.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and diirected.

M & L PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and diirected.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacturer specification.

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and diirected.

S&F magnet catcher for cub board with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F Hasp and staple 100mm safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and diirected.

S&F 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified and diirected.

S&F glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified and diirected.

S&F 15mm bore chromium plated fancy type Two way bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and diirected.

S&F CP Health Faucet with 1.20 mtr metalic Expandable tube & hook complete all as specified and diirected.

S&F Peg set of five stainless steel fixed on CP plate 40mm wide including fixing screw as per approved sample complete all as specified and diirected.

M & L for soakage wells, of size of 1.8 Mtr x 3.00 Mtr effective depth as per HQ CE BZ Drg TD-309 complete all as specified and directed.

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface incl reinforcement and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including complete all as specified and as directed.

S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as requiredcomplete all as specified and diirected.

S&F SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and diirected.

S&F 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified.

S&F glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified and diirected.

S&F PVC Shelves 450mm of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms)

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and diirected.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and diirected.

M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

M&L moorum/ red bajary filling in flloors or pavings, laid in layers n. exc. 15 cm thick, spread, levelled, and rammed including watering complete all as specified and diirected.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLSH, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings such as socket, elbow, junction box, bell mouth, bend, reducer with suitable size of pressed iron/steel sunk box 1.2mm thick dully concealed in wall incl white frame sheet as per site for mounting of switches, sockets, fan regulator etc, one green colour FRLSH cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp

One 3pin 5 Amps socket out let on same board with other switches

One 3pin 5 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed

M&L for point wiring with 2.5 Sqmm single core PVC insulated and unsheathed FRLSH cable, 1100 Volts, grade, multistranded copper conductor and earth continuty wire 2.5sqmm cable connected to earth dolly drawn through and including rigid PVC conduit of suitable size and conduit accessories concealed in wall by cutting grooves except on ceiling and panel in suitable way with clamps, screws etc with such as socket, elbow,junction box, bell mouth, bend, reducer including pressed iron/steel suction box 1.2mm thick for mounting of switches, sockets, fan regulator dully concealed in wall incl white frame sheet as per site for one three pin 15 Amps switch socket outlet point on independent board compete all as specified and directed.

All as per item No.97 above but with 4.0 Sqmm PVC insulated cable for AC point compete all as specified and directed.

Supply and fixing modular switch type 1 way 06 Amp, 1 Module, 240 Volts AC complete all as specified and diirected.

Supply and fixing modular switch type 1 way 15 Amp, 1 Module, 240 Volts AC complete all as specified and diirected.

Supply and fixing modular socket 06 Amp 3 pin combined, 2 module complete all as specified and diirected.

Supply and fixing modular socket 06/16 Amp combined, 2 module complete all as specified and diirected.

Supply and fixing modular bell push 1 way 06 Amp, 1 Module type complete all as specified and diirected.

S&F bell ding dong elelctric 230V AC single pole complete all as specified and diirected.

Supply and fixing modular fan regulator, 120 W, 2 module complete all as specified and diirected.

S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked complete all as specified and diirected.

Supply and fixing batten holder ISI Marked mounted on wall including 09 Watt LED Bulb complete all as specified and diirected.

S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , 2 years warranty ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed.

S&F mirror light decorative compact luminaries with decorative ends caps incl 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S& F Glaze Wall Light including 7/9 watt LED ( B-22) type complete all as specified and diirected.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and diirected.

Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed / surface as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and diirected.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar complete all as specified and diirected.

Supply and fixing in repair MCB SP 6 to 32 Amp 'C' series 10 KA repturing capacity complete all as specified and diirected.

Supply and fixing in repair MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacitycomplete all as specified and diirected.

S&F in repair MCB TPN 63 Amps rating 240V, 10KA 'C' curve complete all as specified and diirected.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug & socket complete with one, single pole MCB 20 Amps 10 KA repturing capacity 240 Volts AC complete all as specified and diirected.

Supply and fixing sheet metal enclosure double door type for MCBs DB TPN 415V AC 4 way with 200 Amps rated bus bar complete all as specified and diirected.

Supply & fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete with all fittings all as specified.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00, BEE Five star rated with brushless direct current motor (BLDC) including provision of cable flexible 3 core of suitable size wire from ceiling rose to Ceiling Fan complete all as specified and directed.

Supply and fix electric water heater storage type, ABS Body with Glass lined tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve thermostate NRV connection piece complete all as specified and directed.

Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 25 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts and lugs complete all as specified and directed

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unsv LT Cable for laying of cable and getting out.

Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed.

M&L for GI Tubing Light grade 40 mm dia(ISI marked) with all fitting/acessories complete all as specifid and as directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed.

M.K Engineers (BID ID -3412022)

M/S C S AITHANI (BID ID -3405102)

M/s Pradeep Kumar (BID ID -3404769)

ACE BUILDERS AND CONTRACTORS (BID ID -3405960)

MOHAN LAL GUPTA (BID ID -3412356)