Delayed Monsoon & Summer Planning works.

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells,

and Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme

Covering 49 Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Sr. No. Item Amount Net

1 B - 1 Well Restoration work at Khambhala Dam

2 B - 2 Pipe line work at Khambhala Dam

3 B - 3 Pipe line work at Court Building HW

4 B - 4 Pontoon Work

5 B - 5 Well Machinery

6 B - 6 Borewell Work

1 Operation and Maintenance for 12 Months

Total Amount Rs.

Total Amount Rs.

Estimated amount Put to tender: Rs. Estimated amount Put to tender: Rs.

Deduct % above Rs. Add % above Rs.

In words Rupees _________________________ In words Rupees _________________________

Executive Engineer Dy. Executive Engineer

P. H. Works Division P. H. Sanitary Sub Division

Porbandar Ranavav

Executive Engineer Dy. Executive Engineer

P. H. Mechanical Division P. H. Mechanical Sub Division

Junagadh Porbandar

Gujarat Water Supply And Sewerage Board

Ranavav Group WSS

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and

Borewells, and Pontoon Arrangement with Pumping Machinery under Ranavav Group Water

Supply Scheme Covering 49 Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Name of Sub work :- Open Well deepining & Disilting work 4.00 Mt dia and 15.50 Mt deep, at

Khambhala dam upstream side.

SCHEDULE - B1 (WELL RESTORATION)

Qty Unit Item Rate Per Amount

Excavation for well including removing & spreading

the excavated stuff as directed with lead up to

Mts. - For Desilting Existing Wells 08 No

150.72 Cum (7) From 9.00 to 10.50 mt depth - (i) In all sort of 233.00 Cum

soils & Soft Murrum

150.72 Cum (8)From 10.50 to 12.00 mt depth - (ii) In Hard 317.00 Cum

150.72 Cum (9) From 12.00 to 13.50 mt depth - (ii) In Hard 343.00 Cum

150.72 Cum (10) From 13.50 to 15.00 mt depth - (ii) In Hard 368.00 Cum

Excavation for well including removing & spreading

the excavated stuff as directed with lead up to

Mts. - 'For Extra Depth If Required

150.72 Cum (1) From 15.00 to 16.50 mt depth - (iv) Hard Rock 910.00 Cum

with Blasting & Chieseling

150.72 Cum (2) From 16.50 to 18.00 mt depth - (iv) Hard 943.00 Cum

Rock with Blasting & Chieseling

150.72 Cum (3) From 18.00 to 19.50 mt depth - (iv) Hard Rock 976.00 Cum

with Blasting & Chieseling

150.72 Cum (4) From 19.50 to 21.00 mt depth - (iv) Hard Rock 1012.00 Cum

with Blasting & Chieseling

150.72 Cum (5) From 21 to 22.50 mt depth - (iv) Hard Rock 1053.00 Cum

with Blasting & Chieseling

Extra for dewatering for excavation in wet condition

150.72 Cum (1) From 3.00 to 4.50 mt depth 32.00 Cum

150.72 Cum (2) From 4.50 to 6.00 mt depth 43.00 Cum

150.72 Cum (3) From 6.00 to 7.50 mt depth 60.00 Cum

150.72 Cum (4) From 7.50 to 9.00 mt depth 77.00 Cum

150.72 Cum (5) From 9.00 to 10.50 mt depth 96.00 Cum

150.72 Cum (6) From 10.50 to 12.00 mt depth 111.00 Cum

150.72 Cum (7) From 12.00 to 13.50 mt depth 139.00 Cum

150.72 Cum (8) From 13.50 to 15.00 mt depth 186.00 Cum

150.72 Cum (9) From 15.00 to 16.50 mt depth 191.00 Cum

150.72 Cum (10) From 16.50 to 18.00 mt depth 218.00 Cum

150.72 Cum (11) From 18.00 to 19.50 mt depth 251.00 Cum

150.72 Cum (12) From 19.50 to 21.00 mt depth 273.00 Cum

150.72 Cum (13) From 21.00 to 22.50 mt depth 309.00 Cum

8.80 Cum Providing and Laying cement concrete 1:2:4 (1: 5984.00 Cum

Cement, 2: Fine agreegate, 3: Course Agreegate)

and curing complete incl cost of form work but

excluding cost of reinforcement - For Beam - '(1) At

231.87 Sq. Mt. Cement Plaster for well 20 Mm Thick rough coat in 149.00 Sq. Mt.

1:3 incl watering, curing etc comp.

Dy. Executive Engineer

P. H. Sanitary Sub Division

PHS WORKS DIVISION-GWSSB-PORBANDAR

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Name Of Sub Work :- Pipe line work at Khambhala dam.

SCHEDULE - B2 (Well P.L.)

Taluka: RANAVAV

Qty Unit DETAILS RATE UNIT AMOUNT

Manufacture, Supply & Delivery of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having

beveled ends plate or coil conforming to IS-3589-2001 or its latest

revision/ ammendment for following thickness outside diameter at

GWSSB store or site anywhere in Gujarat State including all taxes,

insurance, transportation, freight charges, octroi, inspection charges,

loading, unloading conveyance to Departmental stores, stacking etc. all

complete. (Rate for MS Pipe based on the ex. works price of HR Coil as

Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm) & Rs.

59000.00 per MT without GST (Above 10 mm) as onJan-23.( WPI Index

800.00 Rmt. of H. pipe

Bare R Coil of Dec-22

MM Dia OD 4 MM Thick ( From 08 Wells to Main 1145.00 Rmt.

1500.00 Rmt. Bare pipe - 508 MM Dia OD 5.0 MM Thick( For Main line connecting all 4383.00 Rmt.

Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves

& Reflux Valves of following class and diameter including all taxes,

insurance, transportation,freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores, stacking etc.

complete. ( PN -1 with hand wheel/cap operated(PD type short body))

4.00 NO Sluice valve(PN1) Hand Wheel cap operated -150 MM DIA 5848.00 NO

4.00 NO Sluice valve(PN1) Hand Wheel cap operated -500 MM DIA 89866.00 NO

690.00 CUM Excavation for pipe line trenches for water supply, sewerage line, 135.00 CUM

manhole etc. All with shoring strutting if required as per required

gradient and line including safety provisions using site rails stacking

excavated stuff including up to all required lead cleaning the site etc.

complete for all lifts and strata as per specified. - A) Up to 1.50 Mt

Lowering, laying and jointing MS pipe and welding in position to correct

line & level M.S. pipe with outer gunniting & inside lining/Epoxy painting

on pedestal or chairs upon prepared formation or gunniting & inside

lining/Epoxy painting on pedestal or chairs upon prepared formation

orprepared bedding in trenches the rates include conveyance from store

to site of work loading, unloading, joint plastering, hydrotesting

800.00 RMT etc.complete.

Bare pipe - 168.3 MM Dia OD 4 MM Thick 180.00 RMT

1500.00 RMT Bare pipe - 508 MM Dia OD 5.0 MM Thick 427.00 RMT

Lowering, laying and jointing in position following C. I. / D/F Reflux

valves, Butterfly valves, Sluice valves and Air valves including cost of

all labour, jointing material, including nut bolts and giving satisfactory

hydraulic testing, etc. complete.

4.00 NO Sluice valve(PN1)-150MM DIA 585.00 NO

4.00 NO Sluice valve(PN1)-500MM DIA 2905.00 NO

2500.00 Kg M. S. Specials plain & socket ends - Up to 300 mm. dia. 96.00 Kg

400.00 Rmt Gas cutting ( Either Square cut or V cut) pipes,plates etc.including all 56.00 Rmt

costs for the following thickness. Above 5mm upto 10 mm

400.00 CUM Providing C.C.M.:100 for encasing pipes using trap metal size 12 mm to 4113.80 CUM

50 mm incl. form work curing consolidation etc. Complete for various

location on pipeline. - using trap metal 20 mm nominal size (New PL

3.00 Set. Providing chain pulley block with triple gear arrangement, lifting hook, 14400.00 Set.

laod chain & hand chain & locking device etc. - 1 T Manually Operated

30.00 Rmt Additional lift 600.00 Rmt

Dy. Executive Engineer

P. H. Sanitary Sub Division

P.H.WORKS DIVISION,G.W.S.& S.BOARD PORBANDAR

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Name of Sub Work:- Lowering, Laying & Jointing 610mm Dia.M.S. Pipe For NC-38 600 mm DI Conection To

Porbandar NP 800 MS near Jamnagar Chokdi.

SCHEDULE - B3 (Court HW Work)

Qty Unit DETAILS UNIT RATE AMOUNT

75 RMT Manufacture, Supply & Delivery of Electric Resistance Welded RMT 4383.00

(Up to 400mm)/Submerged Arc Welded(Above 400mm)

M.S.Pipe having beveled ends plate or coil conforming to IS-

3589-2001 or its latest revision/ammendment for following

thickness outside diameter at GWSSB store or site anywhere in

Gujarat State including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading

conveyance to Departmental stores, stacking etc. all complete.

(Rate for MS Pipe based on the ex. works price of HR Coil as

Rs.58500 per MT - withouth GST (Above 3.15 mm to 10 mm) &

Rs. 59000.00 per MT without GST (Above 10 mm) as onJan-

23.(WPI Index of H. R Coil of Dec-22 is 144) - Bare Pipe

MM 5.0 MM Thick

4 No Providing and supplying isi mark CI D/F Reflux Valves as per No 135107.00

15:5312 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading. conveyance to

departmental stores, stacking etc. complete. - Reflux Valves PN

1.0 IS 5312 With ISI Mark 500mm

3 No Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly No 89866.00

Valves & Reflux Valves of following class and diameter including

all taxes, insurance, transportation,freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. ( PN -1 with hand

wheel/cap operated(PD type short body)) - Sluice valve(PN1)

Hand Wheel cap operated -500 MM DIA

1 Job Drilling Of 900 mm Dia Horizontal Borehole For Watermain PL Job 982473.00

Crossing Under The Road Incl In All Strata With Required

Length Incl Fixing Of 800 MM Dia MS/RCC Casing Pipe With

Pushing ETC Complete Various Size Of Pipe For 406.4 To

mm Dia Watermain(45 MTR) - RCC Casing Pipe In Place Of

MS Pipe +Water Main 508 mm

Excavation for pipe line trenches for water supply,sewerage

line,manhole etc. all with shoring and struting if required as per

required gradient and line incl. all safety provisions using site

rails and stacking excavated stuff up to all required lead

cleaning the site etc. complete for lifts and strata as specified. In

all sorts of soil and soft murrum, In hard murrum, boulders incl.

macadam road., In soft rock and/or masonry in CM or L M or

Lime Concrete., In hard rock and / or in C. C. 1:2:4 or RCC with

blasting and chiseling or by chiseling/breaking only. - For Depth

Up to 1.5 Mt. - For Pipe Line Laying - At Jamnagar Chowkdi

33.75 CUM In all sort of soft soil. CUM 89.00

33.75 CUM In Hard Murrum CUM 135.00

16.875 CUM In Soft Rock CUM 163.00

84.375 CUM In Hard Rock CUM 372.00

1000 Kg. M.S. Specials Plain and Socketed end - Above 300 MM Dia. Kg. 96.00

1500 Kg. Manufacture, Supply & Delivery of Ductile Iron Flange socket Kg. 151.00

spigot bends, tees, reducers or any other specials as per BS-EN-

545/1995 Class-A series K12 suitable for use with D.I. Pipes

manufactured as per IS:8329/1994delivery of specials is to be

made to GWSSB store or site of works any where in Gujarat

including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete. - With

external bitumen & zinc coating & internal cement mortar lining -

For 700 & 600 MM Dia. Socket & Spigot Type - 350 & Above

75 RMT Lowering, laying, Jointing & welding in position to correct line & RMT 507.00

level M.S. Pipe with outer gunniting & inside lining/Epoxy

painting on pedestal or chairs upon prepared formation or

prepared bedding in trenches the rates include conveyance from

store to site of work loading, unloading, joint plastering,

hydrotesting etc.complete. - 4mm to 7mm Thick - 610 MM

Lowering, laying and jointing in position following C. I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete.

4 No Reflux Valves PN 1.0 IS 5312 With ISI Mark 500mm No 2905.00

3 No Sluice valve(PN1) Hand Wheel cap operated -500 MM DIA No 2905.00

3 No Labour Charges for repairing of leakage in CI/DI pipeline of No 20352.00

following diameter at different places including necessary

excavation manually or by machinary,removing of

mud,dewatering,cleaning of pipe,cutting of pipeline jointing and

repairing using CID joints including CID joints,rubber,nut

bolts,hiring excavator,Hydra/crane ,Dewatering

machine,fuiel,operator etc compl. & labour as required. ( incl.

cost of jointing all material but excluding cost of pipe) - 600 mm

1 No Labour charges for repairing of leakage in MS pipeline of No 9771.00

following diameter at different places including necessary

excavation manually or by machinery, dewatering, removing of

mud, cleaning of pipe and leakage portion, grinding, cutting the

pipeline or joint if necessary incl. welding the joint by using ISI

marked welding rods duly approved by EIC of appropiate

number and size inclusive of excavator, Hydra/ Crane, D.G. set,

welding machine, Gas cutter with LPG Cylinder, Oxygen

cylinder, Grinding machine etc. with fuel, opertor & labour as

required. (incl. all material but excluding cost of pipe) - 813 mm

26.4158 CUM Providing C.C.M.:100 for encasing pipes using trap metal size CUM 4113.80

12 mm to 50 mm incl. form work curing consolidation etc.

Complete for various location on pipeline using trap metal

mm nominal size - Encasing at connection Thrust Bolck

133.571 CUM Refilling the pipeline trenches incl. ramming, watering, CUM 22.00

consolidating desposal of surplus stuff as directed within a

radius of 3 km.

Dy. Executive Engineer

P. H. Sanitary Sub Division

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

Mechanical Section

SITC of Polder Pumpset:

Providing, Installation, and Commissioning and testing of Polder Type

Submersible, Non Clog type with required capacity & head as per IS

suitable for water having upto 10000 PPM turbidity with suitable

submersible wet type, water cooled ,squirrel cage motor to IS 9283 working

on three phase , 50 Hz ±3%, 415 V±10%, AC Supply , 2900 RPM synchronize

speed with 10 Mtr.Copper Conductor Flat Cable from pump to starter panel

2 No. 1 with cable end terminations (4) all supports,clamps,pipe fittings along with No. 4,47,049.00

mechanical seal,bearing bush,stainer etc.complete set & following MOU:

Casing CI, SS CF8M Impeller, Bronze:wearing ring & Bearing bush, TC

mechanical seal, CS/S.S Bearing, S.S shaft with sleeve, SS strainer &MS

Capacity :- 400 m3/hr, 25 m, 60 HP

Overhauling and repairing of SCF pumpset:

Dismantling of pump assembly, overhauling of SCF pump set 55 HP

including replacement of mechanical seals (primary and secondary),

bearings (NDE & DE), O-rings, dual PVC-sheathed round type flexible cable

3 No. 2 wire 10 m, changing of oil, dynamic balancing of rotor and impeller, and No. 2,39,516.00

rewinding of motor. The job also includes complete assembly of the

pump–motor set along with hydraulic testing of the pump set including

Transportation to and fro.

Installing Pumpset on Pontoon:

After servicing and overhauling of the 55 HP SCF pump sets, upon arrival at

site, the pump sets shall be safely unloaded from the vehicle. Thereafter,

using a long-arm crane and experienced manpower, installation of the

pumping machinery along with accessories shall be carried out in the well

3 No. 3 with the help of steel chains, jigs/fixtures, clamps, steel flexible wires, and No. 34,913.00

proper tools and instruments. During lowering and installation of the pump

sets, due care shall be taken to ensure that no damage occurs to the

pontoon structure.

SITC of Electric Resistance Welded (Up to 400mm)/Submerged Arc

Welded(Above 400mm) M.S.Pipe having beveled ends plate or coil

conforming to IS-3589-2001 or its latest revision/ ammendment for

following thickness outside diameter at GWSSB store or site anywhere in

Gujarat State including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading conveyance to Departmental

60 RMT 4 stores, stacking etc. all complete. Including Lowering, laying, jointing and RMT 2,587.00

welding M.S. pipes in position to the correct line and level, including outer

guniting and internal epoxy lining, and epoxy painting on pedestal or

chairs, on prepared formation or bedding in trenches.

At Suction and Delivery Side - Size 273 mm dia.(5 mm thick)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

SITC of Electric Resistance Welded (Up to 400mm)/Submerged Arc

Welded(Above 400mm) M.S.Pipe having beveled ends plate or coil

conforming to IS-3589-2001 or its latest revision/ ammendment for

following thickness outside diameter at GWSSB store or site anywhere in

Gujarat State including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading conveyance to Departmental

stores, stacking etc. all complete. Including Lowering, laying, jointing and

welding M.S. pipes in position to the correct line and level, including outer

guniting and internal epoxy lining, and epoxy painting on pedestal or

chairs, on prepared formation or bedding in trenches.

At Suction and Delivery Side - Size 508 mm dia.(6.3 mm thick)

Hose Pipe: Supply & erection of corrugated hose as per relevant IS with SS

304 double wire braiding of 3 meters length of following diameter with MS

flange of suitable size and thickness fitted on one end. SS 304 Corrugated

Hose with SS 304 double wire braiding 1 end fixed other end swivel MS ASA

150 # 10 mm thick flange size 250 NB X 3 mtr. Each pipe to be provided

with Floater without any additional cost.

Specials - Manufacturing, Supply, Delivery, Lowering & Laying of MS

Specials confirming to relevent IS including all taxes, duties, insurance,

transformation, freight, octoroi, inspection, loading, unloading,convey to

3300 Kg 7 site,stacking etc. compete. Labour charges for lowering laying, erecting, Kg 106.52

fixing, various size of MS Specials such as bypass pipes, joints, channel,

angles plates etc. complete.

Supply, fabrication & erection of metallic floating Jetty / Pontoon for pump

sets with required capacity chain pulley block and gantry girder structure

including required materials like MS angles, channels, floats, GI / MS pipes,

hardware, MS / Aluminum chequered plate with MS / GI safety railings etc.

complete. The floats shall be fabricated using barrels/drums in a modular

5 No. 8 arrangement, with provision for dismantling and removal of the individual No. 3,40,000.00

barrels after completion of the work.

For Single Pump Having Motor Rating from 51 HP Upto 100 HP ( 1 Pump in

1 No. of Pontoon)

Chain Pulley Block:

Providing chain pulley block with triple gear arrangement, lifting hook, laod

chain & hand chain & locking device etc.

3 Ton, 6 m lift

Butterfly Valve : SITC Of ISI mark CI D/F Butterfly Valves as per IS:13095

(Latest Edition) of following class anddiameter including all taxes,

insurance, transportation, freight charges, octroi, nspection charges,

5 No. 10 loading, unloading,conveyance to departmental stores, stacking etc. No. 9,509.00

complete. and giving satisfactory hydraulic testing etc. complete.

250 mm dia - PN 1.0 (Delivery Pipe)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

Butterfly Valve : SITC Of ISI mark CI D/F Butterfly Valves as per IS:13095

(Latest Edition) of following class anddiameter including all taxes,

insurance, transportation, freight charges, octroi, nspection charges,

1 No. 11 loading, unloading,conveyance to departmental stores, stacking etc. No. 47,557.00

complete. and giving satisfactory hydraulic testing etc. complete.

500 mm dia - PN 1.0 (Header Pipe)

S.I.T.C. of both end Flanged CI /MS Dual Plate Check Valve confirming to

API-594/598 standard with PN 1.0 Rating of approved make etc. Complete

as per specification.

250 mm dia - PN 1.0 (Delivery Pipe)

S.I.T.C. of both end Flanged CI /MS Dual Plate Check Valve confirming to

API-594/598 standard with PN 1.0 Rating of approved make etc. Complete

as per specification.

500 mm dia - PN 1.0 (Header Pipe)

Supply, installation, testing & commissioning of flange ends Expansion

Bellow as per EJMA standards of overall length of minimum 300 mm,

designed for 15 mm axial compression and 5 mm axial extension with tie

rods etc. of following MOC & pressure ratings. MOC: Bellows: SA 240 Gr.

304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

250 mm dia - PN 1.0 (Delivery Pipe)

Supply, installation, testing & commissioning of flange ends Expansion

Bellow as per EJMA standards of overall length of minimum 300 mm,

designed for 15 mm axial compression and 5 mm axial extension with tie

rods etc. of following MOC & pressure ratings. MOC: Bellows: SA 240 Gr.

304; Internal Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS - IS

500 mm dia - PN 1.0 (Header Pipe)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

Full Bore Electromagnetic Flow Meter- Regular Power operated

Design, Supply, Installation, Testing, Commissioning of Full Bore

Electromagnetic flow meter with factory calibrated, Regular Power

Operated, flanged connection, Flow sensor, Indicator, transmitter and

totaliser with all accessories viz. surge arrestor, associated cables, cabinets,

hardwares, etc complete as per following specifications:

(I): Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process connection as per IS

or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/

Hastelloy Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding

Electrode, Neoprene/ Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die

1 No. 16 Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with No. 2,63,124.00

Junction Box, CS flanges.

(II) Flow Transmitter/ Converter ( Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for indication of actual

flow rate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to

m/sec velocity, 4 to 20 mA with HART/Modbus output, one scalable pulse,

one status output, IP 67 protection, Die cast aluminium/ polycarbonate/

SS316 with Anticorrosive Paint/ PU finish with glass window enclosure,

Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to

transmitter communication etc along with wall mounted/ stand mounted

For 500 mm dia. Nominal Bore( PN-1.0)

Dismentaling of Existing Pumping machineries and Co-ordinated

accessories with Delivery, Header and Bypass piping and electrical items

225 Kw 17 etc.as per site requirnment and carting it to subdivisional Store/Headwork Kw 919.00

as instructed by Engineer in charge.

Hiring of vehicle for transportation of goods

10 Day 18 Heavy Commercial Vehicle: Truck (Up to first 100 kms per day) Day 3,000.00

Hiring of vehicle for transportation of goods

1000 Km 19 Heavy Commercial Vehicle: Truck (Extra km) Km 24.00

Supplying, Fabricating and erecting MS supports, chanels, angles, etc.

Providing, Erecting, Fabricating the M.S. Structure as per requirement on

site incorporating proper size of MS Angle, Square, Round, flat, Bars,

Channels, Sections, ISBM Girder complete with cutting, welding, grinding

2000 Kg 20 and finishing duly painted with one coat of red oxide with erection on site Kg 77.00

as per direction of engineer incharge with neccessary grouting, cementing,

plastering & finishing complete.

Supplying & fixing Steel Chequered Plate having 10 mm thickness, duly

painted with two coats of black Japan colour for fabrication of Ladder and

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

RCC Foundation:

Providing & laying reinforced cement concrete in Thrust Block / Pipe /

Valves Supports etc. with tar steel black trap kapchi as coarse aggregate for

20 Cum 22 raft, grillage footing inclusive providing binding necessary size TMT steel Cum 8,566.40

bar with centering form work, consolidating as per directive in 1:2:4 ratio.

Supply and installation of MS fabricated structure cabin @ site of work

using 65 mm, 50 mm & 25 mm square pipes with cabin size 5 mtr X 3 mtr X

2.13 mtr including providing & fitting of (1) backalite sheet 3.5 mm thick in

sides, (2) 20 guage MS sheet outer side for side walls, (3) backalite sheet

3.5 mm thick sheet for roof side, (4) 24 guage GI sheet out side with 15 mm

plywood sandwitch fitting & flooring with 19 mm water proof plywood

1 No. 23 sheet and (5) shock proof rubber mating. Job includes oil painting two No. 4,65,734.00

coats, door locking handle arrangement, providing proper air ventilation

and fuse box. The meter & fuse box should be fitted on timber hold fast for

holding screw or nut bolts by semi skilled labour as per detailed technical

specifications, drawings and instructions of the Engineer-in-charge.

SWITCH FUSE UNIT:

SITC of Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse

Unit Cubical type for panel mounting complete with operating mechanism

1 No. 24 suitable to operate on 415V A.C. With HRC fuses of suitable load confirming No. 21,484.00

to IS. 13947 (Part I & III). of following capacities

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

Supply, Installation, Testing & Commissioning of LV MCC Panel totally

enclosed, dust & vermin proof, indoor type, minimum degree of protection

– IP 52 as per IS: 2147, operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral

effectively grounded, with instrumentation compartments accommodating

LED type indicating lamps, control contactors as per IS: 13947, CT of

accuracy class-I as per IS: 2705, relays, meters & control MCBs, air insulated

electrolytic grade Aluminum bus bar for three phase & neutral system with

incoming breaker – microprocessor based Air Circuit Breakers (electrically

operated drawout type) / air break fixed type MCCB with trip free

mechanism, current limiting type as per IS: 8828, Motor Contactor (as per

Type-2 coordination), Overload Relay with built-in single phasing

prevention feature & auxiliary feeders as per SLD drawings, momentary

1 No. 25 contact type push buttons, equipment fittings, bus bars, cable boxes, cable No. 2,76,107.00

gland, incoming & outgoing cable connection for 1100V grade, Aluminium /

Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable,

10% spare terminals, power wiring using 1100V grade, FRLS insulated

copper conductor wires conforming to IS: 694 & 8130, cable compartments

/ alleys of minimum 300 mm size, GI / Aluminum earth bus bar for entire

MCC shall be fabricated from cold rolled, cold annealed (CRCA) sheet steel

& minimum thickness of various members shall be as follows:

Base Frame / Channel / Gland Plate: 3 mm, Load Bearing Members / Doors:

2 mm and Internal Partitions: 1.6 mm.

Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin type

CT, Digital MFM, Analogue Ammeter, SPP, Timer etc.

Lighting Distribution Board (LDB):

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

1 No. 26 MCB to be used) suitable for Three phase incoming and single phase No. 4,652.00

horizontal type outgoing Per phase isolation type (PPI) single door 4 way

Prewired Lighting Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (2 nos.), 16A SP MCB (2 nos.)

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE insulated,

stranded Copper conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on

wall surface with necessary clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor as per site requirement)

conforming to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of following sizes:

KV , 3.5 C x 300 Sq. mm Cu. XLPE (GEB to SFU to MCC Panel)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

PVC insulated flat submersible cable as per detailed technical specifications

1250 RMT 28 of R/C of GWSSB conforming to IS 694, IEC 60227 / 60228. RMT 652.00

3.0 C x 35 Sq. mm Flat PVC Copper Cable

PVC insulated flat submersible cable as per detailed technical specifications

200 RMT 29 of R/C of GWSSB conforming to IS 694, IEC 60227 / 60228. (With Lugs) RMT 58.00

3.0 C x 2.5 Sq. mm Flat PVC Copper Cable

Providing & fitting heavy duty brass cable glands (nickel-plated) with

6 No. 30 washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables No. 813.00

of following type & sizes:

Double Compression Brass Cable Glands 300 Sq. mm

Providing & fitting heavy duty brass cable glands (nickel-plated) with

5 No. 31 washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core cables No. 203.00

of following type & sizes:

Double Compression Brass Cable Glands 35 Sq. mm

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits for 1.1kV

grade PVC/ XLPE insulated cable including necessary earth connectivity

connection, material & consummables making the termination/ joint

6 No. 32 complete ensuring the joint resistance is within the permissble limit as per No. 1,204.00

IS, of following types & sizes: 3C/3.5C/4C

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits for 1.1kV

grade PVC/ XLPE insulated cable including necessary earth connectivity

connection, material & consummables making the termination/ joint

10 No. 33 complete ensuring the joint resistance is within the permissble limit as per No. 972.00

IS, of following types & sizes: 3C/3.5C/4C

Making Trench in Soft Soil of Suitable width for laying cable and back filling

300 RMT 34 the same and making the surface as normal Ground. (LT Cable) RMT 55.00

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

Maintenance free Chemical Earthing

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to submit

test certificate including value of earth resistance of installation duly

4 Lot 35 stamped and signed by agency and officer Incharge has to ensure the value Lot 4,546.00

of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size HOT deep galvanized iron strip for

300 Kg 36 earthing of HT and LT components using proper clamps. Kg 77.00

Supplying, erecting, testing commissioning approved make M.S. Polygonal

High Mast Pole having following general specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 &

Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern

carriage with ring and rubber lines for erection of luminaries of suitable

(b) Maximum telescopic section not more than four

(c) Double drum pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr

and above size)

(d) Approved make L.E.D aviation light = 1 No. Lightning arrestor = 1 No.

with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible motor and

2 No. 37 switchgears having door not more than 1400mm x 300mm with waterproof No. 1,40,214.00

gasket & hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and

necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast poles

High Mast 12 mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No. -

1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm thick,

Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos. Suitable for mounting

Fitting of Light - 6 Nos.

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pontoon Work with Machinery at Fodara Dam

SCHEDULE - B4 (Pontoon Mech)

Quantity Unit Description Unit Rate Amount

Supplying and erecting LED Flood light for High mass fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free high pressure

die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

12 No. 38 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . CRI > No. 8,370.00

85 %( fittings required LM-79 & LM-80 certificates).(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings. The

Engineer incharge may select any wattage capacity between the ranges

Flood Light, IP-65, 4 kV integral surge protection, 440 VAC line supply with

over-voltage protection.

above 120 to 160 W

Supplying and erecting LED streetlight fitting with high power white LEDs

wattage of 3 watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free high pressure die cast aluminium housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and polycarbonate optics/ lenses with company mark/name

engraved or embossed 120 to 300 v, power factor more than 0.95, THD <

10%, CCT 3000 K to 5700 K, uniformity ratio > 0.45, Luminaire efficacy >

lumens/watt. LED driver efficiency > 85%. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

Street Light (IP-65), Surge protection- 4 KV integral and light must have

V AC line supply with over -voltage protection. 30 watts

With B' class galvanised iron pipe 32 mm outside dia 45 cms long duly

welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or

corner for mounting street light luminaire with necessary hardware

materials duly painted.

Total Amount Rs..

Total Amount Rs..

Dy. Executive Engineer

P. H. Mech. Sub. Division

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Mechanical Section

3 Phase Borewell Submersible Pump Sets

Supply, Installation, Testing & Commissioning of approved

make Electric motor driven Borewell submersible pump set

14 No. 1 conforming to I.S. 8034 and motor conforms to IS-9283 14 No. 75,451.00

working at 3 phase 400/440 volt 50 C/S A.C. supply &

Capacity :- Cat SP 2.0, 1700 LPM, 52 m, 30 HP

SITC of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe

having beveled ends plate or coil conforming to IS-3589-2001

or its latest revision/ ammendment for following thickness

outside diameter at GWSSB store or site anywhere in Gujarat

State including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading

conveyance to Departmental stores, stacking etc. all

complete. Including Lowering, laying, jointing and welding

M.S. pipes in position to the correct line and level, including

outer guniting and internal epoxy lining, and epoxy painting

on pedestal or chairs, on prepared formation or bedding in

At Delivery Side - Size 139.7 mm dia.(4.5 mm thick)

SITC of Electric Resistance Welded (Up to

400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe

having beveled ends plate or coil conforming to IS-3589-2001

or its latest revision/ ammendment for following thickness

outside diameter at GWSSB store or site anywhere in Gujarat

State including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading

conveyance to Departmental stores, stacking etc. all

complete. Including Lowering, laying, jointing and welding

M.S. pipes in position to the correct line and level, including

outer guniting and internal epoxy lining, and epoxy painting

on pedestal or chairs, on prepared formation or bedding in

At Header Side - Size 168.3 mm dia.(4.5 mm thick)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Butterfly Valve : SITC Of ISI mark CI D/F Butterfly Valves as

per IS:13095 (Latest Edition) of following class anddiameter

including all taxes, insurance, transportation, freight charges,

octroi, nspection charges, loading, unloading,conveyance to

14 No. 4 departmental stores, stacking etc. complete. and giving 14 No. 3,658.00

satisfactory hydraulic testing etc. complete.

125 mm dia - PN 1.0 (Delivery Pipe)

S.I.T.C. of both end Flanged CI /MS Dual Plate Check Valve

confirming to API-594/598 standard with PN 1.0 Rating of

14 No. 5 approved make etc. Complete as per specification. 14 No. 7,479.00

125 mm dia - PN 1.0 (Delivery Pipe)

Specials - Manufacturing, Supply, Delivery, Lowering & Laying

of MS Specials confirming to relevent IS including all taxes,

duties, insurance, transformation, freight, octoroi, inspection,

3360 Kg 6 loading, unloading,convey to site,stacking etc. compete. 3360 Kg 106.52

Labour charges for lowering laying, erecting, fixing, various

size of MS Specials such as bypass pipes, joints, channel,

angles plates etc. complete.

Supplying & fixing Steel Chequered Plate having 10 mm

105 Sqm 7 thickness, duly painted with two coats of black Japan colour 105 Sqm 4,557.00

for fabrication of Ladder and walkway.

Chain Pulley Block:

Providing chain pulley block with triple gear arrangement,

2 No. 8 lifting hook, laod chain & hand chain & locking device etc. 2 No. 57,120.00

3 Ton, 30 m lift

Supplying, Fabricating and erecting MS supports, chanels,

Providing, Erecting, Fabricating the M.S. Structure as per

requirement on site incorporating proper size of MS Angle,

Square, Round, flat, Bars, Channels, Sections, ISBM Girder

5600 Kg 9 complete with cutting, welding, grinding and finishing duly 5600 Kg 77.00

painted with one coat of red oxide with erection on site as

per direction of engineer incharge with neccessary grouting,

cementing, plastering & finishing complete.

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

RCC Foundation:

Providing & laying reinforced cement concrete in Thrust Block

/ Pipe / Valves Supports etc. with tar steel black trap kapchi

20 Cum 10 as coarse aggregate for raft, grillage footing inclusive 20 Cum 8,566.40

providing binding necessary size TMT steel bar with centering

form work, consolidating as per directive in 1:2:4 ratio.

SWITCH FUSE UNIT:

SITC of Approved make Four Pole LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel mounting

1 No. 11 complete with operating mechanism suitable to operate on 1 No. 21,484.00

415V A.C. With HRC fuses of suitable load confirming to IS.

13947 (Part I & III). of following capacities

Design, engineering, procurement, installation, testing and

commissioning of minimum 500A and upto 630A, 4 Pole, Air

Break Fixed MCCB conforms to IS/ IEC 60947-2 with trip free

mechanism, current limiting type with Thermal Magnetic

release (O / C, S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary contacts with all

1 Set 12 necessary Electro-Mechanical protections & interlocks etc. 1 Set 52,931.00

MCCB module shall have enclosure dimensions- 600(H) x

600(W) x 600 (D) & following technical features: 4 Pole, MCCB

with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of

Icu), TM release

Supply & erection bus bar chamber conforming to IS-375

fabricated from 16 G.M.S.sheet, dust & vermin proof having

hinged door with rubber gasket and necessary busbar

supports with aluminium busbar having current density not

more than 0.8 A/ sq. mm (Rated current/ cross section area)

duly wrapped with colour insulation tape for phase sequence,

three phase & neutral each suitable for following current

capacity with necessary painting mounted on wall or pedestal

frame of required size with necessary connections. Need to

have punched holes in each busbars as per the requirement

of engineer in charge.

Suitable upto 630A

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Control Panel Board:

SITC of Auto Transformer Starter suitable for local & remote

pump control application consisting of Auto Transformer

(vacuum impregnated, air cooled having three (3) tappings at

50%, 65% and 80%), incomer MCCB / MPCB, overload relay

14 No. 14 and contactors as per Type II coordination including digital 14 No. 24,276.00

MFM with RS 485 communication port, analogue type

ammeter with selector switch, run hour meter, required

protective relays & control accessories.

ATS:- 21 to 30 HP

Lighting Distribution Board (LDB):

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

1 No. 15 company of MCB to be used) suitable for Three phase 1 No. 4,652.00

incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) single door 4 way Prewired Lighting

Distribution Board Suitable to house :

Incoming: 25A FP, ELMCB (30mA), Cat-III

Outgoing: 20A SP MCB (2 nos.), 16A SP MCB (2 nos.)

Supply, laying, testing & commissioning of 1.1 kV grade, XLPE

insulated, stranded Copper conductor, galvanised steel flat

strip / round wire armoured, extruded PVC type ST2

sheathed, heavy duty cable (to be laid on wall surface with

150 RMT 16 necessary clamps / in existing cable trench / cable trays / 150 RMT 7,224.00

conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS: 7098 (Part-1) & IEC:

(Part-1) of following sizes: 1.1 KV , 3.5 C x 300 Sq. mm Cu.

XLPE (GEB to SFU to Busbar)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Supply, laying, testing & commissioning 1.1 kV grade, XLPE

insulated, stranded Aluminium conductor, galvanised steel

flat strip / round wire armoured, extruded PVC type ST2

sheathed, heavy duty cable (to be laid on wall surface with

1680 RMT 17 necessary clamps / in existing cable trench / cable trays / 1680 RMT 165.00

conduit / pipe sleeves at road crossing or floor as per site

requirement) conforming to IS:7098 (Part-1) & IEC:60502

(Part-1) of following sizes:

3.5 C x 35 Sq. mm Al. XLPE (Busbar to Panel)

PVC insulated flat submersible cable as per detailed technical

4900 RMT 18 specifications of R/C of GWSSB conforming to IS 694, IEC 4900 RMT 310.00

3.0 C x 16 Sq. mm Flat PVC Copper Cable

PVC insulated flat submersible cable as per detailed technical

200 RMT 19 specifications of R/C of GWSSB conforming to IS 694, IEC 200 RMT 58.00

60227 / 60228. (With Lugs)

3.0 C x 2.5 Sq. mm Flat PVC Copper Cable

Providing & fitting heavy duty brass cable glands (nickel-

plated) with washers & rubber ring conforming to IS, suitable

for 3, 3½ & 4 core cables of following type & sizes:

Double Compression Brass Cable Glands 300 Sq. mm

Providing & fitting heavy duty brass cable glands (nickel-

plated) with washers & rubber ring conforming to IS, suitable

for 3, 3½ & 4 core cables of following type & sizes:

Double Compression Brass Cable Glands 35 Sq. mm

Providing & fitting heavy duty brass cable glands (nickel-

plated) with washers & rubber ring conforming to IS, suitable

14 No. 22 for 3, 3½ & 4 core cables of following type & sizes: 14 No. 154.00

Double Compression Brass Cable Glands 16 Sq. mm

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits

for 1.1kV grade PVC/ XLPE insulated cable including necessary

earth connectivity connection, material & consummables

6 No. 23 making the termination/ joint complete ensuring the joint 6 No. 1,204.00

resistance is within the permissble limit as per IS, of following

types & sizes: 3C/3.5C/4C

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits

for 1.1kV grade PVC/ XLPE insulated cable including necessary

earth connectivity connection, material & consummables

making the termination/ joint complete ensuring the joint

resistance is within the permissble limit as per IS, of following

types & sizes: 3C/3.5C/4C

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits

for 1.1kV grade PVC/ XLPE insulated cable including necessary

earth connectivity connection, material & consummables

making the termination/ joint complete ensuring the joint

resistance is within the permissble limit as per IS, of following

types & sizes: 3C/3.5C/4C

Making Trench in Soft Soil of Suitable width for laying cable

1000 RMT 26 and back filling the same and making the surface as normal 1000 RMT 55.00

Ground. (LT Cable)

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Maintenance free Chemical Earthing

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

8 Lot 27 certificate including value of earth resistance of installation 8 Lot 4,546.00

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size HOT deep galvanized

400 Kg 28 iron strip for earthing of HT and LT components using proper 400 Kg 77.00

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Supplying and erecting LED streetlight fitting with high power

white LEDs wattage of 3 watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free

high pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with

diffuser and polycarbonate optics/ lenses with company

mark/name engraved or embossed 120 to 300 v, power

factor more than 0.95, THD < 10%, CCT 3000 K to 5700 K,

uniformity ratio > 0.45, Luminaire efficacy > 100 lumens/watt.

LED driver efficiency > 85%. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of

12 No. 29 Wattage capacity of LED fittings.The Engineer incharge may 12 No. 2,520.00

select any wattage capacity between the ranges shown.)

Street Light (IP-65), Surge protection- 4 KV integral and light

must have 440 V AC line supply with over -voltage protection.

With B' class galvanised iron pipe 32 mm outside dia 45 cms

long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base

plate, erected on wall or corner for mounting street light

luminaire with necessary hardware materials duly painted.

Hiring of vehicle for transportation of goods

20 Day 30 Heavy Commercial Vehicle: Truck (Up to first 100 kms per 20 Day 3,000.00

Hiring of vehicle for transportation of goods

2000 Km 31 Heavy Commercial Vehicle: Truck (Extra km) 2000 Km 24.00

Horizontal Bore in Well – Drilling of horizontal bore in well in

210 32 hard strata of required size and length (without air 210 622.00

RMT compressor test & dewatering) 115 mm dia. RMT

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and

Pontoon Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering

Villages and 02 Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Pumping Machinery for Wells at Khambhala Dam

SCHEDULE - B5 ( Well Machinery Mech)

Quantit Sr. Quantit

Unit Description Unit Rate Amount

Providing dust and vermin proof MS cabin having two

compartments, one for panel board and other for energy

meter and fuse unit with required locking arrangement

minimum degree of protection IP 52 as per IS 2147 fabricated

from CRCA sheer steel minimum thickness for base frame /

channel / gland plates for 3 mm for load bearing

members,1.6 mm for ineternal members including cutting,

bending, drilling, welding, riveting with ineternal

partitions.The sheet steel enclosure shall be powder coated

as per applicable standard with shade as required with finish

thickness of paint film not less than 80 microns.The cabin

shall have following dimension.

2.5 M X 1.25 M x 0.6 M suitable to incorporate 2 panels of

Total Amount Rs….

Total Amount Rs….

Dy. Executive Engineer

P. H. Mech. Sub. Division

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Borewell and Pumping Machinery at Various Khambhala, Fodara and Javantri Gala

SCHEDULE - B6 ( Borewell Mech)

Quantity Unit Description Quantity Unit Rate Amount

Bore Drilling: Drilling of 315 mm dia. bore in overburden strata and

lowering of 225/250 mm dia. PVC casing pipe up to required length,

and further drilling of 200 mm dia. bore in all types of rocky strata,

2880 RMT 1 soft rock and hard rock by DTH rig, including flushing of bore hole by 2880 RMT 544.00

air compressor up to sand-free discharge, measuring yield of bore by

V-notch, and fixing of bore cap etc. complete. From 0 to 350 meters

Providing and supplying ISI-marked rigid PVC pipe, standard length,

with coupler joint, 250 mm dia. PVC casing pipe (6.0 kg/cm²),

288 RMT 2 including all local and Central taxes, transportation, freight charges, 288 RMT 1,035.00

etc., complete.

Bore Plug: Providing, supplying and fixing bore plug of 100 mm

height, made from PVC of standard make, suitable for the specified

diameter pipe, complete.

SITC of 3 Phase Borewell Submersible Pump Sets Electric motor

driven borewell submersible pump set confirming to IS 8034 and

16 No. 4 motor confirming to IS 9283 working at 3 phase 400 / 440 volt 50 Hz 16 No. 40,878.00

AC supply & 2900 RPM.

Capacity :- Cat 7.1, 510 LPM, 87 m, 20 HP

SITC of various size of ISI marked Heavy duty GI column pipe as perIS:

1239 part I with latest amendment for installation of Borewell

768 RMT 5 Submersible pumps with couplings. 768 RMT 865.00

80 mm Dia (Delivery Pipe)

SITC of ISI Marked HDPE- PE-100 Pipes in standard length suitable for

Sewage & Industrial Effluents as per IS Specification no. 14333-1996

or its latest revision / amendments including all local & central taxes

150 RMT 6 & duties, freight charges, loading, unloading & conveyance to 150 RMT 585.00

departmental stores etc. complete. 125 mm, PN 10 (Header Pipe)

SITC of ISI Marked HDPE- PE-100 Pipes in standard length suitable for

Sewage & Industrial Effluents as per IS Specification no. 14333-1996

or its latest revision / amendments including all local & central taxes

300 RMT 7 & duties, freight charges, loading, unloading & conveyance to 300 RMT 937.00

departmental stores etc. complete. 160 mm, PN 10 (Header Pipe)

S.I.T.C. of both end Flanged CI /MS Dual Plate Check Valve

confirming to API-594/598 standard with PN 1.0 Rating of approved

make etc. Complete as per specification.

80 mm dia - PN 1.0 (Delivery Pipe)

SITC of GI Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee,

Coupling, Reducer, Flanges, etc.)

SWITCH FUSE UNIT:

SITC of Approved make Four Pole LT Heavy Duty Switch Disconnector

Fuse Unit Cubical type for panel mounting complete with operating

2 No. 10 mechanism suitable to operate on 415V A.C. With HRC fuses of 2 No. 7,993.00

suitable load confirming to IS. 13947 (Part I & III). of following

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Borewell and Pumping Machinery at Various Khambhala, Fodara and Javantri Gala

SCHEDULE - B6 ( Borewell Mech)

Quantity Unit Description Quantity Unit Rate Amount

SWITCH FUSE UNIT:

SITC of Approved make Four Pole LT Heavy Duty Switch Disconnector

Fuse Unit Cubical type for panel mounting complete with operating

2 No. 11 mechanism suitable to operate on 415V A.C. With HRC fuses of 2 No. 11,569.00

suitable load confirming to IS. 13947 (Part I & III). of following

Design, engineering, procurement, installation, testing and

commissioning of 160A, 4 Pole, Air Break Fixed MCCB conforms to IS/

IEC 60947-2 with trip free mechanism, current limiting type with

Thermal Magnetic release (O / C, S / C & E / F) with adjustable

settings & having minimum 2NO+2NC potential free auxiliary

2 Set 12 contacts with all necessary Electro-Mechanical protections & 2 Set 38,044.00

interlocks etc. MCCB module shall have enclosure dimensions-

400(H) x 600(W) x 600 (D) & following technical features: 4 Pole,

MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu),

Design, engineering, procurement, installation, testing and

commissioning of 315A, 4 Pole, Air Break Fixed MCCB conforms to IS/

IEC 60947-2 with trip free mechanism, current limiting type with

Thermal Magnetic release (O / C, S / C & E / F) with adjustable

settings & having minimum 2NO+2NC potential free auxiliary

2 Set 13 contacts with all necessary Electro-Mechanical protections & 2 Set 44,931.00

interlocks etc. MCCB module shall have enclosure dimensions-

500(H) x 600(W) x 600 (D) & following technical features: 4 Pole,

MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu),

Supply & erection bus bar chamber conforming to IS-375 fabricated

from 16 G.M.S.sheet, dust & vermin proof having hinged door with

rubber gasket and necessary busbar supports with aluminium busbar

having current density not more than 0.8 A/ sq. mm (Rated current/

2 No. 14 cross section area) duly wrapped with colour insulation tape for 2 No. 3,031.00

phase sequence, three phase & neutral each suitable for following

current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary connections.

Suitable upto 200 A

Supply & erection bus bar chamber conforming to IS-375 fabricated

from 16 G.M.S.sheet, dust & vermin proof having hinged door with

rubber gasket and necessary busbar supports with aluminium busbar

having current density not more than 0.8 A/ sq. mm (Rated current/

2 No. 15 cross section area) duly wrapped with colour insulation tape for 2 No. 5,090.00

phase sequence, three phase & neutral each suitable for following

current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary connections.

Suitable upto 300 A

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Borewell and Pumping Machinery at Various Khambhala, Fodara and Javantri Gala

SCHEDULE - B6 ( Borewell Mech)

Quantity Unit Description Quantity Unit Rate Amount

Control Panel Board:

SITC of DOL / Star Delta starter suitable for local & remote pump

control application consisting of MPCB, overload relay and contactors

16 No 16 as per Type II coordination including digital voltmeter, analogue 16 No 13,771.00

ammeter with selector switch, run hour meter, required protective

relays & control accessories.

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable

200 RMT 17 (to be laid on wall surface with necessary clamps / in existing cable 200 RMT 622.00

trench / cable trays / conduit / pipe sleeves at road crossing or floor

as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502

(Part-1) of following sizes:

1.1 KV , 3.5 C x 185 Sq. mm Al. XLPE (GEB to SFU to Busbar)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable

160 RMT 18 (to be laid on wall surface with necessary clamps / in existing cable 160 RMT 343.00

trench / cable trays / conduit / pipe sleeves at road crossing or floor

as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502

(Part-1) of following sizes:

1.1 KV , 3.5 C x 95 Sq. mm Al. XLPE (GEB to SFU to Busbar)

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium conductor, galvanised steel flat strip / round

wire armoured, extruded PVC type ST2 sheathed, heavy duty cable

(to be laid on wall surface with necessary clamps / in existing cable

500 Sqm 19 trench / cable trays / conduit / pipe sleeves at road crossing or floor 500 Sqm 134.00

as per site requirement) conforming to IS:7098 (Part-1) & IEC:60502

(Part-1) of following sizes:

MCCB to Bus bar chamber , 1.1 KV , 3.5 C x 25 Sq. mm Al. XLPE

(Busbar to Panel)

PVC insulated flat submersible cable as per detailed technical

2000 RMT 20 specifications of R/C of GWSSB conforming to IS 694, IEC 60227 / 2000 RMT 194.00

3.0 C x 10 Sq. mm Flat PVC Copper Cable

Providing & fitting heavy duty brass cable glands (nickel-plated) with

10 No. 21 washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core 10 No. 522.00

cables of following type & sizes:

Double Compression Brass Cable Glands 185 Sq. mm

Providing & fitting heavy duty brass cable glands (nickel-plated) with

10 No. 22 washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core 10 No. 392.00

cables of following type & sizes:

Double Compression Brass Cable Glands 95 Sq. mm

Name of work :- Pipeline Connectivity, SITC of Pumping Machinery for Open Wells and Borewells, and Pontoon

Arrangement with Pumping Machinery under Ranavav Group Water Supply Scheme Covering 49 Villages and

Cities.Tal.Porbandar & Ranavav, Dist. Porbandar

Headwork: Borewell and Pumping Machinery at Various Khambhala, Fodara and Javantri Gala

SCHEDULE - B6 ( Borewell Mech)

Quantity Unit Description Quantity Unit Rate Amount

Providing & fitting heavy duty brass cable glands (nickel-plated) with

32 No. 23 washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core 32 No. 203.00

cables of following type & sizes:

Double Compression Brass Cable Glands 25 Sq. mm

Providing & fitting heavy duty brass cable glands (nickel-plated) with

32 No. 24 washers & rubber ring conforming to IS, suitable for 3, 3½ & 4 core 32 No. 120.00

cables of following type & sizes:

Double Compression Brass Cable Glands 10 Sq. mm

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits for

1.1kV grade PVC/ XLPE insulated cable including necessary earth

connectivity connection, material & consummables making the

12 No. 25 termination/ joint complete ensuring the joint resistance is within 12 No. 1,204.00

the permissble limit as per IS, of following types & sizes: 3C/3.5C/4C

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits for

1.1kV grade PVC/ XLPE insulated cable including necessary earth

connectivity connection, material & consummables making the

12 No. 26 termination/ joint complete ensuring the joint resistance is within 12 No. 1,045.00

the permissble limit as per IS, of following types & sizes: 3C/3.5C/4C

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits for

1.1kV grade PVC/ XLPE insulated cable including necessary earth

connectivity connection, material & consummables making the

32 No. 27 termination/ joint complete ensuring the joint resistance is within 32 No. 972.00

the permissble limit as per IS, of following types & sizes: 3C/3.5C/4C

Cable Termination Kit (With Lugs)

Providing & fitting heat shrink cable termination / jointing kits for

1.1kV grade PVC/ XLPE insulated cable including necessary earth

connectivity connection, material & consummables making the

64 No. 28 termination/ joint complete ensuring the joint resistance is within 64 No. 852.00

the permissble limit as per IS, of following types & sizes: 3C/3.5C/4C

Making Trench in Soft Soil of Suitable width for laying cable and back

filling the same and making the surface as normal Ground. (LT Cable)