PROVISION OF SECURITY WALL AROUND 01 ACRE OF ICG LAND AT BARUVAPETA VILLAGE AT SRIKAKULAM DISTRICT AP

Amount

Schedule "A" Part – I to Schedule "A" Part – XVII: NOTE: Schedule "A" Part – I to Part – XIV EXCEPT Schedule "A" Part –IIA , Schedule "A" Part – XV, Schedule "A" Part –XVI and Schedule "A" Part –XVII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only Contractor shall insert their rates for Schedule "A" Part –IIA Schedule "A" Part – XV, Schedule "A" Part –XVI and Schedule "A" Part –XVII under Green coloured field under Column - 6 only

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified.

Spreading and levelling in layers n.exc 25 cm thick all as specified. Note:- The earth obtained from excavted material for security wall,complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil, complete all as specified.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, etc. or for shaft, wells, cespits manholes, piers holes, etc. nexc 10sqm on plan and getting out in hard/dense soil.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in soft/loose soil complete all as specified.

Excavation in trenches exc 1.5 M in depth and not exc 3.0 M in depth and getting out in soft/loose soil complete all as specified.

Excavation over areas not exceeding 1.5 M deep for foundation etc. and getting out in hard / dense soil complete all as specified.

M&L cement concrete 1:4:8 type D2 (40mm graded stone aggregate) in foundations, filling and mass concrete.

M&L RCC design mix M-30 ( 20mm graded stone aggragate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete, complete all as specified.

M&L RCC design mix M-30 ( 20mm graded stone aggragate) Columns, pillars, piers, posts and struts, complete all as specified.

M&L RCC design mix M-30 ( 20mm graded stone aggragate) for beam, lintel beam, cantilevers, bressummers,etc, complete all as specified.

M&L RCC design mix M-30 ( 20mm graded stone aggragate) for slab supported on walls, beams and columns in floors roofs, landings, balconies, canopies,deck slab and in shelves and the like, complete all as specified.

High strength corrosion resistant TMT bars, grade Fe-500D, 10mm dia and over, Cut to length, bent to shape required Including cranking, Bending spirally hooking for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

High strength corrosion resistant TMT bars, grade Fe-500D, 6mm to 8mm dia and over, Cut to length, bent to shape required Including cranking, Bending spirally hooking for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

High strength corrosion resistant TMT bars, grade Fe-500D of 5mm to 10mm dia bars as in stirrups and binders, Cut to length, bent to shape required Including cranking, Bending spirally hooking for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces, complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions flat rough finised surfaces, complete all as specified.

M&L Formwork to sides and soffits of floor or roof beams,beam haunchings, girders,bressummers, lintels, cantilevers, shelves including suports over hangs etc, complete all as specified.

M&L formwork to soffits of suspended slabs such as roof slabs floor slabs, landings and similar work n.exc 200mm thick, complete all as specified.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

M & L 100 mm thick Cement concrete for sub base type D2, 1:4;8 (using 40 mm graded aggregate) complete all as specified and directed.

M & L 25 mm thick Cement concrete for sub base B-1, 1:2:4 (20mm graded aggregate)complete all as specified and directed.

M&L 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone agg )as in plinth protection finishing the cement concrete surface even and smooth without using extra cement, complete all as specified.

M&L brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified.

M&L rendering 10 mm thick on brickwork/concrete in CM (1:6) finished even and smooth without using extra cement .(Note: Rate shall be Including for necessary Scaffolding and Safety Measures where required at site), complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement including mixing of water proofing liquid, complete all as specified. (Note : - Rate of water proofing liquid shall be paid under respective item).

M&L 5 mm thick plastering in CM (1:4) finished even and smooth on ceiling and concrete surfaces, complete all as specified.

Supply only water proofing liquid, complete all as specified.

S &F Anodised Aluminum powder coated (Minimum thickness of powder coating 50 micron thick) Sections for Partitions,Windows and door with frame and shutter fully or partly glazed, sliding/openable/fixed with panel inserts of 4.8mm thick sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing,anodized aluminium snap beading, screws, anodized aluminium fittings such as handles including taking down existing aluminium window/door/partition of any description: the size of aluminium sections shall be all as specified in relevent IS code and SSR Part-I. [Notes: (i) Supply and fixing of panel inserts of glass/gauze will be measured and paid separately (ii) Weight of aluminium sections only shall be accounted for payment purpose. However unit rate quoted shall be deemed to include for cost of rubber beading,glazing clips, neoprene packing, fittings such as handles complete all as specified and as directed .(Note: Rate shall be Including for necessary Safety Measures where required at site) MAKE: Jindal / Hindalco / Ajit India / Indal

S&F 4.8 mm thick tinted glass ordinary quantity and glazing with rubber gasket in squares exceeding 0.50 sqm in each pane .(Note: Rate shall be Including for necessary Safety Measures where required at site) MAKE: Saint Gobain / Modiguard Float .

M&L for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed upto 4th floor. (Note: Rate shall be Including for necessary Safety Measures where required at site).

M & L Preparing New plaster surface apply three coast of white wash on internal walls (Note: Rate shall be Including for necessary Scaffolding and Safety Measures where required at site).

Preparing new plaster surface apply two coat of cement base paint over a coat of primer on external walls complete all as specified.

Preparation of new plastered surfaces and applying three coats of white wash on ceiling, complete all as specified.(Note: Rate shall be Including for necessary Scaffolding and Safety Measures where required at site).

Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exe 25cm, complete all as specified.

Removing excavated material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting poit , complete all as specified.

Sand filling under floors or in foundations including watering and consolidation, complete all as specified.

M&L 80 mm thick PCC M-40 machine pressed precast concrete glazed coloured interlocking pavor block any shape and size confirming to IS-15658-2006 using with grey cement and pigment, complete all as specified.

Providing cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) in copings/benching, complete all as specified.

MS Framed work such as gates ,grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, ornamental and intricate design,portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc, complete all as specified.

MS Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified.

Mild steel Plain bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Boring for bored cast-in-situ piles 600mm dia in any strata except SDR/hard rock and getting out and disposal of spoil out side MD land using Hydraulic system of boring method, complete all as specified and directed.

RCC M-30 grade design mix (20mm gradaed stone aggregates) as in piles and pile caps,complete all as specifiefd and directed.

Carrying out low strain integrity test on bored cast in situ piles including analysing the result as per ASTM D 5882 and as directed by Engr - in- Charge.

Chipping out pile up to cut off level including disposal up to a distance of 50 m all as specified and directed.

M&L RCC (design mix) M-30 (20mm graded aggregates) in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter fair finished flat surfaces of concrete, complete all as specified.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified.

Preparation of newly plastered surfaces of walls and applying two coats weather proof paint over a coat of primer, complete all as specified.

Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) confirming to IS 1161-1979 Gde-St -240, complete all as specified.

Preparation of new or previously un-treated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

Hand packing broken stone or boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified.

S&F in repair 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified.

M&L 20 mm thick granite of any type any colour as per requirement of user table rubbed and polished in gate pillars and similar structures in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified.

M & L for excavating in post holes each n exc. 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25cm, watering and removing surplus soil to distance n exc50m and making good surface, complete all as specified.

M& L Cement concrete 1:2:4 Type B 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed.

S & F for Mild steel angles , bars , flats, etc as in posts and struts in fencing including cutting tops to shape as supports for stiffening of fencing , wall ties, hold fasts, clamps plain angle cleats for securing purlins as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165.

Supply & Fixing for PVC coated Chain link MS galvanisd fencing of 3.2mm dia of size 50X50mm or type including line wires, any type of standards, rails, straining bolts, etc including provission of binding wire and all as specified and directed by Engr in Charge.

S&F for Mild steel round bars of 10mm dia, cut to length, bent to shape required horizontally woven in chain link fenced and all as specified and directed by Engr in Charge

S&F Mild steel work as in posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165.

M&L Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer.

S&F galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., complete all as specified., (Note: each line wire measured separately).

S&F CONSECZALsuper razor punch barb tape (SRPBT) aluminium base helix coil with and include necessry GI Fixing clips for securing. with following specification : (i) Dia of coil(unstreched-600m m) (ii) No of circle-51 turns per coil (iii) weight of each coil with hessian pack 8.5 kg (iv) coverage per coil -8 RM (v) cental core wire: made from 2.6 mm dia GI H.T.SS wire as per IS-4454 galvanised as per IS-2629 (vi) Razor punched strip:-Razor punched tape is CONSECZAL steel comprising of AL base with Zinc alloy @ 150gm/M2 confirming to ASTM-729/A-729M with additional primer treatment of epoxy/Polyurethane & final paint top coat of caulified green shade (BSL 139) by Hot dipping process complete all as pecified and as directed.

S&F of Steel tubular swaged poles complete with cast iron base plate finial taper plug bolts nuts & screws as specified type 410 SP-31 (9 Mtrs long) complete all as specified.

S & F of LED Street light fittings 70 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrision resistant including themal management in multiple optic with IP 65/66 protection, complete all as specified . Make: Wipro/Philips/CG.

Supplying, laying, jointing and testing LT UG XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade of size 35 Sqmm 3.5 Core, complete all as specified.

Supplying, laying, jointing and testing LT UG XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade of size 10 Sqmm 2 Core, complete all as specified.

Sand cushioning/sand covering for underground cable protection complete all as specified. Note : Punned down thickness only shall be measured).

Brick sub class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified.

GI tubes light grade IS marked of 40 mm dia with all fittings laid in trenches etc for protection of cable complete all as specified.

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead of 32x6 mm (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS bar 8mm dia 150mm c/c reinforcement, 32mm dia GI light grade for protection of earth electrode 20mm dia for watering all as speicified and directed and tested on completion.

S & F of GI tubing bracket of size 40 mm dia medium grade, 1.2 Mtr. Long, bend in 120 degree for mounting of street light fittings with MS clamp of MS flat size 50x5mm with, nuts, bolts, and washers, wi complete all as specified.

S & F of cable loop box PVC of size 280x170x130 mm including 6 Amp MCB and 20Amp foure way backallite connector for loop in and out fixed in pole including necessary clamps bolts/nuts, complete all as specified and directed.

S & F of caPVC copper flexible cable three core 1.5 sqmm drawing internally in poles for connection of street light from pole box to street light fitting, complete all as specified.

M & L for cement concrete type B1, 1:2:4 (20mm graded crushed stone aggregate) in lintles up to 45cmx45cmx20cm height square shape for making coping of poles, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Carrying out following initial load testing on 600mm dia piles complete all as per IS and as directed including necessary anchroing and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements)

(a) Compression test

(b) Pull out test

(c) Laterlal test

Carrying out routine load test on 600mm dia piles complete all as per IS and as directed including necessary anchroing and support piles of suitable load/size to be casted as required (Quoted rates are inclusive of all these requirements).

(a) Compression test

(b) Pull out test

(c) Laterlal test

M & L for point wiring on wall and surface wiring on ceiling/roof/truss/false ceiling with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized Modular sunken boxes made out of MS sheet of standard thickness with earth dolly and crown plate and cover plate for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with captive MS screw including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing all as specified and directed by Engineer-in-Charge for the following:- (a) For one light/ fan point/Socket point controlled by one switch.

All as per descripition abovehere in before but using 2.5 Sqmm cpper wire for power socket.

Ceiling rose surface type bakelite 65x50mm three terminal ISI marked.

Switch modular flush type, 6 amps, 230V AC, single pole, one way complete all as directed.

Switch modular flush type, 16 amps, 230V AC, single pole, one way complete all as directed.

Socket, 6A - 2/3 pin combined 2 module,complete all as specified

Socket, 6A/16A - 2/3 pin combined 2 module,complete all as specified

BEE 5 Star rated energy efficient (BLDC) wall mounted fan, 400mm sweep silent operation, suitable to operation on 90-245V, 1300 RPM double ball bearing. Complete all as specified and directed. Make: Gorilla/CG/Usha/Havells/Orient

BEE 5 Star rated new generation, energy efficient, environmental friendly, long life, verstile pressure, die-cast aluminium, IP-66 road way lumnaire with luminious efficacy not less than 135 Lumens/watt, 35 W LED including suitable GI tubing bracket for mounting, MS clamp, nuts and bolt Compete all as specified and directed.Make : Wipro/Philips/Osram/CG

BEE 5 Star rated energy efficient LED light fitting 1x 18/20 watt, with luminious efficacy not less than 135 Lumens/watt four feet, white batten fittings with drivers etc complete with all accessories including three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as specified and directed Make : Wipro/Philips/Osram/CG

Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, SPN, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. Make : Legrand/Schneider / Hager

Supply and fixing MCB Single Pole and nertral 6 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection rating and commissioning . Make : Legrand/Schneider /Hager .

Supply and fixing MCB Single Pole 6 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection rating and commissioning . Make : Legrand/Schneider /Hager .

M&L for Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I 2009 specification.

SREE CONSTRUCTIONS

RAGHU RAMA PANDA

MEGHANA CONSTRUCTIONS

Sai Sri Constructions

Ruchira Associates

SAI KRISHNA ASSOCIATES

V.Venkata Ramaiah

K Eswar Chandra