REPAIRS TO COMPOUND WALL FENCING IN AOR AT ZONE B AHMEDABAD

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins & jambs etc. complete

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete.

Dismantling of fencing, wire mesh of any description and in any position complete.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) complete

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil complete.

M&L for Sand filling under floors or in foundations including watering and consolidation complete

M&L for plain cement concrete 1:4:8 Type D-2 using 40mm graded aggregates as in foundations, filling and mass concrete etc complete

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling mass concrete complete

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping, benching, holdfast, fixing of fencing post above wall etc, finished even and smooth using extra cement incl use of necessary form work complete

M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) in columns, posts, boundary pillars, brackets, appex stone, kerb stone etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and set in cement mortar 1:4 with joints to match complete.

M&L for providing precast cement concrete louvres and jallies 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4 including all mouldings (Post shall be measured separately) complete.

M&L for reinforced cement concrete Nominal mix type B1 1:2:4 (20mm graded agreagate) in beams, cantilevers, bressummers, lintels over 1.5m span etc complete.

M&L for brick work with sub class 'B' bricks old size bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius complete .

M&L half brick thick brick work with sub class "B" bricks old size straigth or curved on plan exc 6m mean radius built in CM (1:4) complete.

M&L Formwork, rough finished to sides and soffits of floor or roof beams, beam haunch girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, etc. complete

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh / welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete

S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm nexc 15cm long dia of shank 11 to 15mm complete.

M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complete.

Supply only mild steel round bars of 10 mm dia as in line wire cut lengths, Hooking ends etc conforming to Fe- 410 - W (Gde E-250) quality A (For tying chain link fencing complete

M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complete .

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete.

S&F galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire staples or steel pins etc complete

Supply only chain link fencing any size any type etc complete.

M&L for 75 mm thick PCC(1:4:8) type D2 using 40mm graded stone agg as in sub base finished even and rough to receive finishes complete.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete

M&L for glossy finish Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick with grey cement and pigment and set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 complete.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

Taking down cement plaster on brick or stone wall including scrubbing down with water etc complete.

M&L for 15mm thick rendering in two layer on brick work or concrete faces of surfaces of wall, 5mm thick plaster in CM:1:4 mixed over 10mm thick plaster in CM 1:6 & finished even and smooth without using extra cement complete.

M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of Cement wash with Portland cement slurry to a smooth bodied opaque finish primer complete.

M&L for preparation of new steel surfaces exc 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for preparation of new untreated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete

SNEH TRADERS

DMA PROJECTS

Shree Krushna Supply Corporation