Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹9.2 L+₹37,275.65 (4.22%)Rejected-Finance R O VILLAGE KHERI CHANGAN PO KANGTA FELOG TEHSIL DADAHU ST DISTT SIRMOUR HP | L2 | Rejected-Finance Rejected | |
| 3 | L3₹9.4 L+₹54,312.60 (6.15%)Rejected-Finance CHIYAMIMYANA PO KANSAR TEHSIL PAONTA SAHIB SIRMOUR HP | SIRMAUR | SIRMAUR | HIMACHAL PRADESH | L3 | Rejected-Finance Rejected |
Tender Value
Refer Docs
EMD Value
₹27,300
Closing Date
29 May 2021, 11:00 amClosed
Executive Engineer Jal Shakti Division Nahan
Executive Engineer Jal Shakti Division Nahan
C/O 1 No. RCC main storage tank 25000 ltrs capacity, 5000 ltrs capacity and 1 No RCC inake chamber and Laying and jointing and dismantling of GI pipe in distribution system and FHTC) under JJM.
2021_HPIPH_47676_6
NHN-SMR00-722- 2326-2406 dt 20-5-2021
Open Tender
Civil Works
Item Rate
90 days
Nahan
Please refer Tender documents.
10 documents required · 10 mandatory
₹400
Executive Engineer Jal Shakti Division Nahan
₹27,300
Yes
12 Aug 2021
21 May 2021
29 May 2021
21 May 2021
29 May 2021
21 May 2021
Amount
Excavation in foundation & plinth in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge.
Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
a)Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc.in all thickness.
b)Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string sources and the like.
Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.
Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforced for reinfoece concrete work in wall(any thickness not less than 0.1m thickness) attahced pillaster buttresses, plinth and string courses etc. from top of foundation level upto floor two level,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..
Providing and laying reinforced cement concrete work 1:2:4(1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) nominal size and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs, landings shelves and their supports balconies beams,girders bressumers and cantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
Supplying and fixing C.I ( man holes cover )with locking arrangement for frame of internal dimension 500mm rectangular C.I cover (Medium duty) single seat the weight of cover to be not less 58 KG, I/c allleads, lifts and carriage of material at site and as directed by the Engineer Incharge.
Fixing G.I pipe for scour pipe, outlet pipe 50mm dia , including all leads, lifts and carriage of material at site and as directed by tbe Engineer Incharge.
Steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position and applying and priming coat of red lead paint in gratings, framed guard bars, ladders, railings , brackets and similar work. including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
Excavation in drains and channels etc.in earth work in all kinds of soil such as Kankar Moorum,Shingles, Conglomerate saturated soil decomposed or soft rock &hard rock by blasting including dressing of sides and beds,disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and thenreturning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of the Engineer Incharge.
Laying and jointing GMS pipes(light grade)of various dia metre for stands post and scour pipe including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
40mm dia (L)
25mm dia (L)
20mm dia (L)
15mm dia (L)FHTC
Providing and fixing G.I.union including Nipple of approved make and relevent ISS complete in all respect i/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
G.I.Union
15mm dia (L)
20mm dia (L)
25mm dia (L)
40mm dia
Providing and fixing brass fullway valve with wheel including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
20mm dia
25mm dia
40mm dia
Providing and fixing brass bib tap of approved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
15mm dia
Manufacturing & supplying of G.I. pipes manifold distributor vertical with 65 mm dia (G.I. Pipe will be issued by the department free of cost) by cutting and welding the distributor shall be 50 cmlong having4 no's 15 cm diab connection at the top with 10" long nipple of 15 mmdia G.I. pipes both side& providing elbow 15 mm dia and 25 mm dia to 32 mm dia bottom inlet by properly pluging at the top with G.I. socket and with MS sheet 3.15 mm thick at the bottom as per direction of the Engineer-in -charge at the site of work.
P/F nipple 15 mm dia FHTC
Chaman Lal Contractor
Deepak Kumar Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .