Supply, Fitting,Fixing of Godrej Make Chairs for Auditorium ( Room No. 328) at Academic Block of West Bengal National University of Jurisdical Sciences Campus at 12,LB Block, Sector-III, Salt Lake City, Kolkata-700 098 during the year 2017-18

Amount

Jupiter Mid Back Chair Supply , Fitting & Fixing of original Godrej make Auditortium Chair . The Supply should be as per approved drawing & design/ specifications. The following OEM Certifications must be furnished during the submission of Bid :ISO 9001:2015, ISO 50001:2018 , ISO 45001:2018,ISO 14001:2015,ISO 13485:2016,(All ISO must be from NABCB Accredited Agency), BIFMA (Membership & Level 2,3 Product Certificates ), Indian Design Mark, AIOTA ( All India Occupational Therapist Association) , Greenguard by UL and Indoor Air Quality Gold by SCS GLOBAL Services. Price must include delivery to location and fitting fixing charges all inclusive. Authorised Dealers of OEM are also allowed to submit above certificates of OEM with a proper consent letter from OEM. Bidder turn over criteria: The minimum average annual financial turnover of either bidder or, OEM should be more than 100 crores during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid document. Documentary evidence in the form of certified audited balance sheets of relevant periods or a certificate from the chartered accountant / cost accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case of turnover of OEM the above mentioned certificate of OEM should be attached. 1. SEAT ASSEMBLY: The seat should be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert arid upholstered with fabric. * Approx. Seat Size: Depth: 42.0cm. Width @ rear: 44.0cm. Width @ front: 41.0cm. 2. BACKREST ASSEMBLY: The back assembly should be flexing type and made of Polyurethane Foam moulded with MS. tubular frame insert and upholstered with fabric and back cover. The insert should be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MS tubular frame with flexible nylon straps running across the length and width of the frame. * Approx. Back Size: Height: 65.5cm. Width @ top: 34.5cm. Width @ seat level: 46.0cm. 3. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +1-2 kg/m3. . OLYURETHANE FOAM: The Polyurethane foam should be moulded with density = 45 ±2 kglcu.m . COVERS: The back cover and mechanism cover should be vacuum formed from black ABS sheets. 6. ARMREST ASSEMBLY: The Armrest understructure should be upholstered PU foam moulded with MS insert. Arm _tops should be made of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced with wooden insert. Armrest width = 7.0 ±0.5cm and should be offered as common / individual armrest between chairs. 7. UNDERSTRUCTURE: • MS black powder coated ( DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not should be use. • Footprint should be a of base plate: made of HR steel 15.0 ±0.2cm X 22.0 ±0.2cm X 0.5 ± 0.05 cm thick. • Backrest supporting beam width: 46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2 ±00.16cm MS tube. • Understructure fixed to ground by anchors with washer and nut. (Rate including all taxes & duties)

WELL DECOR

M/S EASTMAN