REPAIR TO CHAJJA FACIA WPT SUNKEN FLOOR WATER PROOFING TREATMENT INT WATER SUPPLY FLOORING PLASTERING AND PERIODICAL SERVICES TO JCOS ORS MD ACCN AT HAMID BAGH AND RATANADA COMPLEX UNDER THE AREA OF AGE BRII OF GE ARMY CENTRAL JODHPUR (9037/E8)

Amount

Note: (i) 80% of materials required for incorporation in the work will be supplied/ Deposited by the contractor into B/R store yard, which will be issued as the work proceeds. (ii) No payment will be allowed for "materials lying at site" under this contract only work done payment shall be allowed. (iii) Note:- All items in BOQ are for"Materials and labour (M&L) /Supply and fix (S&F)" and to be executed in "Repairs " unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. bidders are requested to quote their rates accordingly.

Demolition Reinforced Cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for ,complete all as directed

M&L for Stone slab 25mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 150 cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edged rounded or chamfered including groove at the edge on bottom side as specified and directed, set, jointed and pointed in mortar ,complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and making good, cutting exceeding 10cm and n exc 20cm girth all in stone /concrete walls ,complete all as specified and as directed

Demolition Cement concrete in gound floors and pavings n.exc 15 cm thickness below or above ground level ,complete all as directed

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed

M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 20mm graded crushed stone aggregate) to receive floor finishes etc, complete all as specified and as directed.

M&L for 15-18mm thick udaipur green stone slab machine cut in cooking platform laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including polishing complete all as specified and as directed

M&L for 18-20 mm thick machine cut KOTA stone slab as in SHELVES , KITCHEN PLATFORM etc machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and polishing all as specified over and including 15mmthick 1:6 CM screed bed, complete all as specified and as directed.

Demolition of stone masonry built in cement mortar ,complete all as directed

M&L for precast cement concrete solid building blocks 1:2:4 type B1 (20mm graded crushed stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 , complete all as specified and as directed.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water ,complete all as specified and as directed

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement ,complete all as specified and as directed

M&L for Rendering 10 mm thick CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth ,complete all as specified and as directed

M&L for preparation of newly plastered surfaces of ceiling/ chhajja/ soffits of slab and applying three coat of white wash ,complete all as specified and as directed

M&L for two coat of cement based paint on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation of surface ,complete all as specified and as directed

M&L for two coat of oil bound distemper on newly plastered/ unplastered surfaces of walls over two coat of wall care putty including preparation of surface all as directed by Engr -in- charge.

M&L two coat of oil bound distemper on old plastered/ unplastered surfaces of walls over two coat of wall care putty including complete removal of existing treatment all as directed by Engr -in- charge.

M&L for coloured glazed joint free ceramic tiles (premium/1st quality) 300mmx450mmx6mmthick as per IS 13712 Grade II(a) over 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) all as specified and as directed. Make : Kajaria/Orientbell/Somany.

M&L for coloured non skid joint free ceramic tiles (premium/1st quality) 300mmx300mmx7mmthick as per IS 13712 Garde II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:4) all as specified and as directed by Engr -in-charge. Make : Kajaria/Orientbell/Somany.

M&L for vitrifide dark coloured tiles (premium/1st quality) 10 mm thick ( square, rectangular ) area of each tiles exc 0.18 sqm but n exc 0.36 sqm , in floor etc set and jointed in neat cement slurry and ointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4. ,complete all as specified and as directed Make : Kajaria/Orientbell/Somany.

All as per item No. 21 Above but as in skirting including 10mm thick backing coat in cm 1:4 ,complete all as specified and as directed

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar ,complete all as specified and as directed

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed

Dismantling mild steel work in any position any description including doors,windows, ventilators, gates but excluding framed truss etc ,complete all as directed

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm and refixing in same opening ,complete all as directed

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm and removing from site ,complete all as directed

Taking down chowkat or frame n exc 1.50 sqm (without taking off shutter from frame ) door,window, ventilator and removing from site ,complete all as directed

All as per Item No. 28 above but area exc 1.5 Sqm and not exc 4.00 sqm and removing from site complete all as specified and as directed.

S&F factory made 35mm thick 2nd class Hard wood pannelled door shutter (any no. of panel) with lock rail and panel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated ,complete all as specified and as directed

S&F 35mm thick 2nd class hardwood glazed and skelton shutter, open rebated and prepare to recieive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc ,complete all as specified and as directed

S&F factory made PVC shutter 30mm thick (style)consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain color PVC channel having a PVC sheet for top rail of 20mm width width stuck in side with solvent cement for stiles premium/1st quality and plain color PVC sheet for top rail lock rail on other side and as gap insert for top rail and bottom rail. Paneling of plain color PVC sheet to be fitted in the MS frame welded/ sealed to the stiles premium/1st quality & rails with suitable PVC sheet beading and jointed together with slovent cement complete all as specified.

S&F PVC door frame of size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube ,complete all as specified and as directed

S&F mild steel butt hinges medium weight, cold rolled of size 100 mm size ,complete all as specified and as directed

S&F repairs of mild steel butt hinges medium weight, cold rolled of size 75mm size by welding/ screwed etc as directed by Engr-in-charge.

S&F mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt ,complete all as specified and as directed

S&F mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate ,complete all as specified and as directed

S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design as approved by Engr-in-charge.

S&F 200mm long aluminium anodised tower bolt ,complete all as specified and as directed

S&F aluminium anodised handle extruded section of size 150mm long ,complete all as specified and as directed

S&F single action spring hinges , mild steel with steel wire spring , stove enamelled black ,100mm long ,complete all as specified and as directed

S&F repairs single action spring hinges , mild steel with steel wire spring , stove enamelled black ,100mm long ,complete all as specified and as directed

S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with or without cooler opening, dovetailed or welded all as specified.

S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, with or without cooler opening, dovetailed or welded all as specified.

S&F steel ventilator with top hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars,complete all as specified and as directed

S&F steel ventilator with top hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars,complete all as specified and as directed

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 ,complete all as specified and as directed

S&F repairs of mild steel box type/projecting type hinges medium weight for existing windows and ventilator (cutting of existing projecting type hinges from the frame), of appropriate size as per sample by welding etc as directed by Engr-in-charge.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface over 10Cm width or girth including preparation of surface ,complete all as specified and as directed

M & L for prepration of the new surfaces of steel windows & vents over 10Cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed

Hacking out old broken glass (any thickness , size , quality or description ) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones ,complete all as specified and as directed

S&F 3 mm thick plain glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane. ,complete all as specified and as directed

S&F 3 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane. ,complete all as specified and as directed

S&F galvanised mild steel wire cloth 0.40mm nominal dia of wire and average width of aperature 1.20 mm ,complete all as specified and as directed

S&F galvanised mild steel wire cloth 0.40mm nominal dia of wire and average width of aperature 0.63 mm as fixed in repair ,complete all as specified and as directed

S&F repair 20-22mm dia decorative type, powder coated curtain rods including brackets fixed to walls complete with two nos decorative knobs at each end (As approved by Engr -in-charge).

Taking up or down GI tubing 15 mm bore and connection, including cleaning for refixing or remove to store ,complete all as directed

Taking up or down GI tubing 20/25 mm bore and connection, including cleaning for refixing or remove to store ,complete all as directed

Taking up or down GI tubing 40 mm bore and connection, including cleaning for refixing or remove to store ,complete all as directed

Refxing old 15mm bore steel tubing and connection in new or old position (walls, ceiling or floor ) ,complete all as specified and as directed

Refxing old 20/25mm bore steel tubing and connection in new or old position ( walls, ceiling or floor ) ,complete all as specified and as directed

Refxing old 40mm bore steel tubing and connection in new or old position ( walls, ceiling or floor ) ,complete all as specified and as directed

Supply & Fixing GI tubing 15mm bore medium grade (ISI Marked) galvanized with and Including all fitting fixed on wall, ceiling or laid to floor complete all as specified.

Supply & Fixing steel tubing 20mm bore medium grade (ISI Marked) galvanized with and including all fittings on wall, ceiling or laid to floor complete .

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10cm girth ,complete all as specified and as directed

S&F repair stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of iron pipe or union complete all as directed.

S&F repair stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20/ 25mm bore of iron pipe or union complete all as directed.

S&F repair of CP bib tap 15mm dia, cast copper alloy,fancy type, concealed with wall flange, screwed for iron pipe all as specified and directed. Make: Jaquar/ Marc/Cera

S&F 15mm bore CP Stop valves,cast copper alloy, fancy type, concealed with wall flange, screwed pressure, screwed both ends for iron pipe for unions and fixed in repair ,complete all as specified and as directed. Make: Jaquar/ Marc/Cera

S&F CP Pillar taps 15mm bore fancy type , cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair ,complete all as specified and as directed Make: Jaquar/Marc/Cera

Dismantling of cast iron, PVC or AC drain pipe jointed in cement mortar of size 100mm bore ,complete all as directed

S&F 50mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/sqcm laid in trenches complete all as specified and as directed.

Dismantling of cast iron, PVC or AC drain pipe jointed in cement mortar of size 100mm bore ,complete all as directed

All as per item No. 73 above but 75mm dia ,complete all as specified and as directed

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors. ,complete all as specified and as directed

S&F 110mm dia PVC (SWR) bends (any radius), diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed

S&F 110mm dia PVC (SWR) Junction, single, equal or unequal, ordinary or inverted with spigot or socket branch complete all as specified and as directed.

M&L for 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) bends (any radius), diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed

M&L for 75mm outlet diameter dia PVC (SWR) floor trap, with grating including jointing to waste pipe fixed with solvent cement, and making floor good ,complete all as specified and as directed

S&F repairs of PTMT grating with or without hole including jointing with solvent cement 75 / 100 mm dia complete all as specified and as directed.

S&F repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white (ISI marked) with integral foot rests and cast iron `P' or `S' trap front or back inlet Including flush pipe of suitable dia HDPE pipe etc, fixed in repairs Including connection to trap etc making good to floor and treatment to sunken floor completely (in respective items) all as directed. Make: Hindware/ Parryware/ Cera.

S&F Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap Including flush pipe of suitable dia HDPE pipe CP Jet Spray and connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..,complete all as specified and as directed Make: Hindware/ Parryware/ Cera.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,complete all as specified and as directed. Make: Hindware/ Parryware/ Cera.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern 9-10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed complete all as specified and as directed. Make: Hindware/ Parryware/ Cera.

S&F repair Vitreous China wash basin, white, flat back, size 550 x 400 mm including brackets ,complete all as specified and as directed Make: Hindware/ Parryware/ Cera.

S&F repairs 32 mm dia 900mm long PVC flexible waste pipe suitable to steel sink and wash basin all as specified and as directed.

S&F repair Kitchen sink with drainage board made of stainless steel 0.8mm thick with plug, washers and wastes; Including bedding in cement mortar or Including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm & bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed Make: Blue Star/ Jayna/Nirali

S&F repair Kitchen sink without drainage board made of stainless steel 0.8mm thick with plug, washers and waste Including bedding in cement mortar or Including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm & bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed Make: Blue Star/ Jayna/Nirali

S&F Stainless steel plate rack of overall dimension not less than 750mm x 600mm x 250mm, thickness should not be less than 0.5mm complete all as directed . Make: Blue Star/ Jayna/Nirali

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed . Make: Jaquar/Cera

S&F 75 mm dia Chromium plated shower roses including shower aRM with or without swivel joints, 15mm bore, including fixing to steel pipe or union ,complete all as specified and as directed Make: Jaquar/Cera

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land ,complete all as directed

M&L for roof treatement in the following stages :- (a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement ,complete all as specified and as directed (b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . (c) Third layer of APP modified polmeric membrane centre core of 20 micron HMHDPE outer film 20 micron both sides thickness 1.5 mm having weight 2.25 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm. (e) Fifth layer of 40mm thick plain cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate)

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded cushed stone aggregate) over roof for making good depression/undulation and as in roof padding, roof kerb, as in mass concrete in sunken floor under WC etc to match the existing ,complete all as specified and as directed

Dismantling existing water tank of capacity exceeding 250ltrs and not exc500 ltrs and removing to MES store ,complete all as directed

Dismantling existing water tank of capacity exceeding 500ltrs and not exc1000 ltrs and removing to MES store ,complete all as directed

S&F rotational moulded polyethylene water storage tank triple layer white colour, (ISI Marked) (cylindrical vertical with closed top), hoisted and fixed in position all as directed of 500ltrs capacity complete all as directed. Make: Sintex pure/ Rotex/ Polytuff.

All as per item.No. 99 above but of capacity 1000ltrs ,complete all as specified and as directed Make: Sintex/ Rotex/ Polytuff complete all as specified and as directed.

Disconnecting existing tanks exc 250 lts and n.exc 500 lts, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position ,complete all as specified and as directed

Supply and fixing in repair Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule ,complete all as specified and as directed

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match ,complete all as specified and as directed

M&L for 50 mm thick PCC 1:3:6 type C1 (using 20mm graded curshed stone aggregate) as in plinth protection finished even and smooth without using of extra cement including forming joints in 2 mtr interval and filled with bitumen mastic all as specified ,complete all as specified and as directed

M&L for 75 mm thick P.C.C 1:2:4 type B-1 (using 20mm graded curshed stone aggregate) as in floors and paving etc and finishing cement concrete surface even and smooth without using extra cement ,complete all as specified and as directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm gradded stone aggregates) for receiving paver block ,complete all as specified and as directed

M&L for 25mm thick Sand filling as a cushion under paver block ,complete all as specified and as directed

M&L for machine made precast cement concrete blocks (interlocking paver) colour rubberised 60mm thick with 6mm top layers of anteabrasive material. The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than M-35, complete all as specified and as directed

Taking down of cupboard frames / door frames etc with shutters area exc 1.50 sqn but nexc 4 Sqm each & removal ,complete all as directed

S& F fabrication of press steel cup board shutter using 1.0 mm thick M S plain sheet and with frame 1.25 mm thick bent to shape including two coat synthetic enamel paint on internal surface & two coat of syn enamel paint wooden grain pattern on external surface along with locking arragement mortice lock handle with a set of two keys ( The Pressed steel cupboard frame in the middle may be with single or double rebate as per site condition. Quoted rate shall be inclusive of any such provisions) ,complete all as specified and as directed

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cm ,complete all as directed

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 16-18mm thickness PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M&L for 16-18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .

Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide ,complete all as specified and as directed

S&F 0 degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample ,complete all as specified and as directed

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabinet shutters ,complete all as specified and as directed

S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers ,complete all as specified and as directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple ,complete all as specified and as directed

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers ,complete all as specified and as directed

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge.

M&L for treating the plastered surface (Sunken floor) with two coat of epoxy or water proofing adhesive coating complete all as specified by the manufacturers instruction and as directed by engineer in charge.(Make Pidilite, STP, IWL)

M&L for 75 mm thick plain cement concrete 1:2:4 type B 1 (using 20 mm graded crushed stone aggregates) to use in sub base of floors of sunken portion laid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green complete all as directed by the E-in-Charge.

M&L for applying one coat of cold emulsion bituminous primer @ 0.25 Kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 2.0 mm thick as specified above shall be laid by torch application method as per manufacturer instructions including cushion layer of coarse sand thickness 25 mm shall be provided to protect membrane ,complete all as specified and as directed

S&F magic eye brass body 15 to 20 mm dia all as per sample including drilling necessary hole in panel door shutter complete all as specified and as directed by engr-in-charge.

complete Removal of existing treatment and preparation of old surfaces by brooming down or steel wire brushing scraping moulds, moss and effloroscent salts & trading oil and greasy spots to wall including cornices etc plastered or unplastered surtfaces (old decorated surfaces) and old plastered/unplastered surfaces of wall & applying two coat of exterier emulsion paint over one coat primer complete all as specified Note: Finishes shall be carrying out in G+2 bldgs on walls all as specified and as directed.

M&L for squarred rubble walling jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortor 1:6, complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and as directed.

M&L for face work masonry with 100-125mm thick white/chitter sand stone having rock face bushings not less than 15-20mm incl chisel drafted margin 20-25mm wide all as per local Jodhpur Pattern (KADAOU) regular coursed well bonded bedded & solidly hearted built in CM 1:4 complete all as specified. Height of Kadaou stone course shall not be less than 200mm all as directed at site.

M&L for keyed pointing to kodaou facework of Jodhpur sandstone in CM 1:3 using white cement & pigment to match the shade of the stone.

Preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over applying one coat of Birla white putty and application of Sand Paper to make surface even and smooth , complete all as specified and as directed.

Preparation of new surfaces of wall and applying two Coat of OBD over one coat of Birla white putty , complete all as specified and as directed.

Preparation of old surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even duly applying white putty and applying one coat of white wash , complete all as specified and as directed.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying one coat of oil bound distemper on wall surface , complete all as specified and as directed.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying one coat of white wash on wall surface , complete all as specified and as directed.

All as item No 134 here-in-before but one coat of cement based paint on external surfaces of wall complete all as specified and as directed.

Preparation of old decorated surfaces including washing, rubbing down stopping of cement based paint surfaces complete and applying two coats of cement based paint on surfaces of wall complete all as specified and as directed.

Preparation of new surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.

Preparation of old steel surface and applying one coat of synthetic enamelled paint to old steel Surfaces of any description, over 10cm in width or grith, not otherwise described , complete all as specified and as directed.

Preparation of old painted wooden surface of any discription not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and as directed.

Preparation of old decorated surfaces of any description, over 10cm in width or girth and applying for one coat of synthetic varnishing, complete all as specified and as directed.

50 mm thick PCC 1:3:6 type C1 (using 20mm gradded crushed stone aggregate) as in plinth protection , complete all as specified and as directed.

15mm thick rendering in CM 1:4 on stone masonry finished even and smooth without using extra cement , complete all as specified and as directed.

BEYLIM INFRA

SNEH CORPORATION