SPECIAL REPAIR TO BLDG NO P 229 OF 311 FD HOSP AND ANNUAL MAINTENANCE REPAIR WORK OF ECHS POLYCLINIC TYPE C BLDG NO P1 AT AHMEDABAD CANTT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.00 sqm complete all as specified and directed.

Refixing in same openings chowkhats or frames n. exc 1.5 Sqm with shutter(without taking off shutters from the frames) complete all as specified and directed.

M&L for mild steel work as in hold fasts & similar small articles conforming to Fe-410-0 or Fe-310 complete all as specified and directed.

S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165)

S&F 35 mm thick flush shutter , Solid core , construction with particle board core and plywood face panels commercial type on both sides complete all as specified and directed.

S & F anodised Aluminium alloy sections sliding windows with frames Series-'B' (18mm) and 1.5mm thick all section and , 2 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with stainless steel wire cloth .45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

M&L Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 300mm size complete all as specified and directed.

S & F 200mm size aluminium anodised, barrel tower bolt of extruded section.

S & F 150mm aluminium alloy handles, fabricated type anodised

M&L Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L Preparation of old surfaces of steel of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roofing, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete all as specified.

S&F pre-painted galvalume aluminium zinc coating plain steel sheet 0.45mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings cut to length & bent to shape required, fixed using hot dip galvanised, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete all as specified.

M&L for Extra over brick work for closing cavity at opening complete all as specified and directed.

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified.

M&L for 6mm thick AC plain building boards fixed to MS frame as in ceiling all as directed by Engr-in-Charge.

S&F mild steel rolled sections as in framing for fixing AC boards in ceiling and the like fixed with angle cleats and connecting plates of grade Fe-410-W (Gde-E-250 quality-A)

M&L for preparation of new/old surfaces of AC sheet and applying three coat of white wash as in ceiling complete all as specified and directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed by the EIC.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement (ht of bldg up to 4m) complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment on walls.

M & L applying 3 mm thick wall care putty on wall complete all as specified and directed.

M & L for preparation of new plastered surface and applying two coats of distemper oil emulsion, white or tinted over a coat of primer on wall complete all as specified and directed

M&L for preparation of new surface of walls and applying two coats of cement based paint over one coat of alkali resistant priming coat complete all as specified and directed.

M&L for complete removal of exisiting treatment and preparation of old decorated surface of walls (plastered unplastered ) including applying two coat of oil bound distemeper on walls leaving premises clean and tidy all as specified and directed by the Engineer-in Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including laid over 15mm thick screed in CM 1:6 complete all as specified and directed.

All as per item No 32 above but as in skirting including 10mm thick backing coat in CM(1:4) complete all as specified.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed by the EIC

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement complete all as specified.

M & L 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in flooring, surface finished even & fair without using extra cement complete all as specified.

M&L for chequered coloured cement concrete tiles 20cmX20cmX25mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

M & L for continuous brick edging with width equal to the width of the brick;laid dry on end vertically complete all as specified and directed.

S& F rolled mild steel in section as in purlins, rafters, and the like with angle cleats and connecting plates complete all as specified and as directed by EIC.confirming to Fe-410-w (Gde-E-250) quality B.

M&L for TMT bars (Fe 500), 6 to 8 mm dia and over upto incl 10mm dia as in stirrups bending spirally or hooping for columns, hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed.

M&L filling surface cracks not exc 5 to 7 mm wide with “Dr fixit cracks X power or equivalent polymer modified cracks filler all as per manufacturer instructions and as directed

M&L for non skid coloured ceramic tiles 300 x 300 x 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick cement screed bed in cement mortar in 1:6 complete alll as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm X 200mm X 6-7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in matching pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of first quality all as specified & directed

Taking down 15mm bore pipe steel tubing and connections of any description and from any position and removing from site.

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors (concealed type) complete all as specified.

S&F 15mm dia stop valves, fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair.

S&F 15mm dia Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair

S&F in repairs vitreous china squatting pan Orrisa pattern of size 580X440mm white with CI `p' or `s' trap front or back inlet and foot rests any pattern (excluding cistern and flush pipe) in repairs complete including lime concrete bedding complete all as specified & directed.

S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs

S&F anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

Dismantling of old PVC water tank exc 500 Ltr & n.exc 1000 Ltr capacity and hoisting and fixing in position after cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position incl 25mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed all as specified in SSR Part I

Taking down carefully surface aluminium point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc as required for the following :-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One light point controlled by two, two way switches.

(d) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(e) One socket outlet 6 amp controlled by one switch on indepdendent board.

(f) One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame for mounting modular switches, sockets as required for 3 pin 16 amps socket outlet controlled by one switch.

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / SSK / CONA as approved

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675501 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref no. 675511 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675555 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675552 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 675530 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x4 sqmm + 1x2.5 sqmm earth wire complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x6 sqmm + 1x4 sqmm earth wire complete.

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame all as per Legrand Mylinc cat ref no. 675558, 689009, 675564 & 675584 or eqivalent in Schneider Zencelo or MK Blenze as approved.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Philips cat ref no. ENDURALED BATTEN "BN 108C LED 20S PSU CDL WH" or equivalent in Wipro or GE Lighting as approved.

S&F LED fixture wall light 3.6 watt colour silver & synthetics 300mm x 107mm x 52mm weather proof IP 44 including connection all as directed. Make : Philips LED Jojoba, Code No : 34034/14/86 or eqivalent in Wipro as approved.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 16 amp.

(b) Double pole 63 amp.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully aluminium submain wiring with PVC surface conduit and making good disturbed surfaces complete.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair.

Dismantling of ceiling fan 1200/1400 mm sweep of any make, cleaning throughly, servicing of fan motor & parts fitted there in, oiling, greasing to bush / bearings, replacement of unserviceable parts where required, re- assembling, testing hanging at site as directed.

Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith all as specified and directed.

S&F modular switch two way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675502 or equivalent in Indoasian or C&S Electric as approved.

S&F modular bell push, 6 amp, 1 module all as per Legrand Mylinc cat ref no. 675504 or equivalent in Indoasian or C&S Electric as approved.

S&F door bell, AC, 240 volts, single pole complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

Taking out old unserviceable fittings and S&F LED fixture 8 watt including connection all as per Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 or eqivalent in Philips / Wipro / C&S (Nakshtra) as approved.

Taking out old unserviceable fittings and S&F LED bulkhead fitting 10 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips cat ref no. WT202W LED6S PSU S1 PC or equivalent in Wipro/C&S (SIRUS) as approved.

S&F in renewal 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp as required. Make - Legrand cat ref no 607841 & 408592 / 408593 or equivalent in Hager or Schneider as approved.

S&F air ventilation fan 300 mm in toilet in rectangular in shape, PVC body, white colour 230V including louver shutter complete all as specified and directed. Make : Bajaj / Havells / Crompton

S&F ceiling fan 1200 mm sweep, 5 star rating white colour single phase, ISI marked including connection with PVC insulated and sheathed 3 core copper conductor cable of size 0.50 sqmm complete. Make - Havells / Almonard / Crompton as approved.

S&F galvanized pressed steel terminal boxes concealed in wall of thickness 1.2 mm covered with modular plate white cover in renewal of normal existting switch board of size not exceed 200 mm x 250 mm x 60 mm deep or as per site requirement complete.

partechengineers

SNEH TRADERS