Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | SHAJI T.J L1 | SHAJI.K.K L2 |
|---|---|---|---|---|---|
| 1.00Roof Truss | |||||
| 1.00 | OD18778/2025-2026:Engaging man mazdoor for cleaning roof top | 3 | each | 1,000 ₹3,000 | 966 ₹2,898 Lowest |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 6.48 | sqm | 343 ₹2,222.64 Lowest | 355.27 ₹2,302.15 |
| 1.00 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded
stone aggregate 40 mm nominal size derived from natural sources) | 0.49 | cum | 8,065 ₹3,919.59 Lowest | 8,337.64 ₹4,052.09 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 718.3 | kg | 172 ₹1,23,548.12 Lowest | 178.73 ₹1,28,382.3 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 387.59 | kg | 167 ₹64,727.53 Lowest | 172.1 ₹66,704.24 |
| 1.01 | 10.20:Providing and fixing bolts including nuts and washers complete. | 0.96 | kg | 156 ₹149.76 Lowest | 161.69 ₹155.22 |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 190.92 | sqm | 750 ₹1,43,190 Lowest | 774.78 ₹1,47,921 |
| 1.01 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 15.91 | metre | 838 ₹13,332.58 Lowest | 866.24 ₹13,781.88 |
Tender Value
₹4.0 L
EMD Value
₹9,953
Closing Date
30 Aug 2025, 2:00 pmClosed
Joint Director
O/OJointDirector,HydraulicResearch,KERI,Peechi
Providing Roof truss for Sedimentation Office Building
2025_Irrig_790194_1
IRR/IDRB/EST/4770/2025_5_1_1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Peechi
Please refer Tender documents
10 documents required · 10 mandatory
₹880
₹9,953
23 Sept 2025
23 Aug 2025
1 Sept 2025
23 Aug 2025
30 Aug 2025
23 Aug 2025
Amount
Roof Truss
OD18778/2025-2026:Engaging man mazdoor for cleaning roof top
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.20:Providing and fixing bolts including nuts and washers complete.
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
SHAJI.K.K (BID ID -2316971)
Bidder Name
SHAJI.K.K
SHAJI T.J
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .