Kerala

Active

Works

Civil Works - Roads

253 ADDITIONAL FACILITIES TO KRISHIBHAVAN AT ELANTHOOR GP (Retender)

Local Self Government Department

ELANTHOOR | Pathanamthitta, Kerala

Amount: ₹1.2 LCloses: 6 Oct 2026

Timeline

Published26 Sept 2026
Closes6 Oct 2026
Bid Opening7 Oct 2026

Tender Value

₹1.2 L

EMD Value

₹2,903

Closing Date

6 Oct 2026, 2:00 pm

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

ASSISTANT ENGINEER ELANTHOOR GP

Work Description

253 ADDITIONAL FACILITIES TO KRISHIBHAVAN AT ELANTHOOR GP (Retender)

Tender Information

Tender ID

2026_LSGD_872206_28

Reference Number

1/AE/LIDEW/ELTR

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Period of Work

210 days

Location

ELANTHOOR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredNIT (.pdf)

RequiredSBD (.pdf)

RequiredFOT (.pdf)

RequiredINTEGRITY PACT (.pdf)

RequiredEPAY (.pdf)

RequiredLICENSE (.pdf)

RequiredGST (.pdf)

RequiredPAN (.pdf)

RequiredPRELIMINARY AGMT (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹2,903

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

26 Sept 2026

Published

26 Sept 2026

Bid Opening

7 Oct 2026

Download Starts

26 Sept 2026

Download Ends

6 Oct 2026

Submission Starts

26 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1maintenance
1.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	0.15	cum	-	-
1.002	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.15	cum	-	-
1.003	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	166.33	kg	-	-
1.004	OD4456/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required	53.12	sqm	-	-
1.005	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	152.28	kg	-	-
1.006	OD16999/2026-2027:Supplying and fixing 25x25x10g or nearest available size GI welded mesh and applying a coat of Primer including all charges etc.complete	38.62	sqm	-	-
1.007	OD17002/2026-2027:Supplying and fixing 150mm PVC rain water gutter,Semicircular section including fittings with 32x5mm flat supports at 1m interval etc. complete	7.1	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.24 MB

Tendernotice_2.pdf

PDF • 0.25 MB

Tendernotice_3.pdf

PDF • 0.27 MB

Tendernotice_4.pdf

PDF • 0.28 MB

Tendernotice_5.pdf

PDF • 0.25 MB

Tendernotice_6.pdf

PDF • 0.26 MB

Work Item Documents

253sbd.pdf

Tender Documents • 1.69 MB

BOQ_1479536.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1maintenance
1.001	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	0.15	cum	-	-
1.002	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.15	cum	-	-
1.003	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	166.33	kg	-	-
1.004	OD4456/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required	53.12	sqm	-	-
1.005	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	152.28	kg	-	-
1.006	OD16999/2026-2027:Supplying and fixing 25x25x10g or nearest available size GI welded mesh and applying a coat of Primer including all charges etc.complete	38.62	sqm	-	-
1.007	OD17002/2026-2027:Supplying and fixing 150mm PVC rain water gutter,Semicircular section including fittings with 32x5mm flat supports at 1m interval etc. complete	7.1	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1maintenance

1.001

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

0.15

cum

1.002

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

0.15

cum

1.003

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

166.33

1.004

OD4456/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required

53.12

sqm

1.005

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

152.28

1.006

OD16999/2026-2027:Supplying and fixing 25x25x10g or nearest available size GI welded mesh and applying a coat of Primer including all charges etc.complete

38.62

sqm

1.007

OD17002/2026-2027:Supplying and fixing 150mm PVC rain water gutter,Semicircular section including fittings with 32x5mm flat supports at 1m interval etc. complete

7.1

metre