DAY TO DAY REPAIRS TO FLOORING, STAIR CASE, SUNKEN FLOOR, SEWAGE DOWN TAKE PIPE AND REPLACEMENT OF WPT, WC/BATHROOM SANITARY FITTINGS AND OTHER MISC ITEMS IN DOMESTIC AREA AND REPAIR / MAINT OF E/M INSTALLTION AT AF STN HALWARA

Amount

Demolition for cement concrete exceeding 15cm thickness but above ground floor as sunken floor, complete all as specified and directed.

M&L for cement concrete type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring, complete all as specified and directed.

M&L for applying two coats of water proofing coating of approved make on the entire surface of sunken portion as per manufacturer's instructions, complete all as specified and directed.

M&L for 15mm thick cement screed in cement mortar 1:3 mixed with integral water proofing compound including a bonding coat of approved make and applying as per manufacturer's instructions, complete all as specified and directed.

M&L 25mm thick cement concrete type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement, complete all as specified and directed.

S&F in repair 32mm dia GI pipe 450mm long beveled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x450mm) x 6-7mm thick (1st quality) on vertical surfaces as in skirting / dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L Non skid jointless cerermic coloured tiles 7 to 8 mm thick (1st quality) (Square/rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment, complete all as specified and directed.

M&L Non skid jointless cerermic coloured tiles 7 to 8 mm thick (1st quality) (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment, complete all as specified and directed.

All as per above item No 10 above but in vertical surfaces as Dado/Skirting and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor tiles, complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exceeding 1.5 Sqm but not exceeding 4 sqm each and refixing in same opening, complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed.

S&F in repair 100 mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repair aluminium handles cast type anodised 150mm long, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed.

S & F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of 12 mm dia square guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Glazing & Wire cloth shall be measured and paid separately. (ii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars, complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with SS wire staples, complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F of CPVC pipes outer dia 20mm SDC 11 & plain CPVC SDR 11 fittings in trenches fixed to walls,floors, & ceilings including cutting and chases and making good, complete all as specified and directed.

S&F of in repair CPVC pipes outer dia 32mm SDC 11 & plain CPVC SDR 11 fittings in trenches, fixed to walls,floors, & ceilings including cutting and chases and making good, complete all as specified and directed.

S&F in repair 15mm bore stop cock cast copper alloy fancy type chromium plated with long shank and cup concealed type, complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy fancy type CP with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F as in repair 15mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

All as per item No 32 above but 20mm bore.

S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe and fixed, complete all as specified and directed.

S&F in repairs Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms ), complete all as specified and directed.

S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts, complete all as specified and directed.

S&F in repairs PVC valve less syphonic action type flushing cistern 10 ltrs capacity low level white with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair swivel shower with shower arm CP fancy type 15mm size, complete all as specified and directed.

S&F in repair Pillar taps, 15mm bore of PTMT fancy type any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms), complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges, complete all as specified and directed.

S&F in repair glass shelf bathroom corner having radius 300mm min including fixing arrangement, complete all as specified and directed.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm, complete all as specified and directed.

S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S&F in repair health faucet (ABS body) mild steel chromimum plated suitable for 15mm dia pipe with 1.2 mtr long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and directed.

S&F in repair Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain, waste pipe and plug and proclain stopper but including bracket, complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flishing cistern and flush pipe complete incl. provn of cement concrete bedding, complete all as specified and directed.

S&F in repair Viterous China wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S&F in repair 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted including 20mm ball valve and fixed in position, complete all as specified and directed.

S&F in repair 750 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted including 20mm ball valve and fixed in position, complete all as specified and directed.

S&F in repair 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted including 20mm ball valve and fixed in position, complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints, stack clamps, including all fittings (any type of 'T'/tee ,bend,Y, Branch piece single/double, reducer , vent coil, access door, junction single/double, equal/unequal , any type of trap etc) 75mm dia fixed to walls/floor/trenches etc and height of building upto G+5, complete all as specified and directed.

All as per Srl item No 52 here in before but for 110mm dia pipes.

Demolition on reinforced cement concrete of any description and in any position not otherwise specficially provided for, complete all as specified and directed.

M&L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) as in Precast cement concrete cover slab for tank staging, manhole cover and similar article with plain face, set in cement mortar 1:4, complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooping for columns hooking bends and binding with including mild steel wire (annealed) not-less than 0.9mm dia or securing with clips quality, complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required area not exc 150 sqcm, complete all as specified and directed.

M&L for cleaning and removing with bleaching powder to all scale, sludge, mud, algae and dirt etc from tanks capacity upto and including 1000 liters from mouths of circulating pipes etc and washing with clean water including writing in words with synthetic enamel paint as CLEANED ON (date), complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description, complete all as specified and directed.

Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 61 above but except bricks.

M&L for 15 mm thick rendering in cement mortar 1:6 on Brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

All as per srl item No 63 above but 15 mm thick in cement mortar 1:4 including water proofing compound, complete all as specified and directed. Note : Water prooging compound will be measured and paid separately as "Supply only".

M&L for preparation of new surface of wall and applying two coat of distemper oil emulsion over a coat of primer above 2mm thick wall putty, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying three coats of white washing, complete all as specified and directed.

M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots applying one coat of distemper oil emulsion on old surfaces, complete all as specified and directed.

M&L for preparing old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot,, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of white wash on walls, complete all as specified and directed.

Supply only Integral water proofing compound, complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant priming plastered and other surfaces, complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed.

M&L for preparation of old surfaces plastered or unplastered including washing, rubbing down and stopping of distempered or painted surface and applying one coat of acrylic smooth exterior emulsion paint of required shade all as per manufacturers instructions, complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coats of cement base paint on walls, complete all as specified and directed.

M&L for plastering 5 mm thick in cement mortar 1:3 finished even & smooth without using extra cement as on ceiling, complete all as specified and directed.

M&L for prepration of new surfaces of and applying three coat of white wash on ceiling, complete all as specified and directed.

M&L for prepration of old surfaces of applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for prepraration of old surfaces of wood over 10 cm width or girth and applying one coats of synthitic enamel paint, complete all as specified and directed.

M&L for prepraration of old surfaces of steel over 10cm width or girth and applying one coats of synthitic enamel paint, complete all as specified and directed.

M&L for preparation of old plaster / concrete surfaces and applying one coats of synthetic enamel paint using min 3 tints coloures as in camoflaging pattern complete all as specified and directed.

S&F in repair stainless steel grating 100mm dia over floor trap, complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L Non skid jointless cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06Sqm but n.exc 0.11 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment, complete all as specified and directed.

M&L for pressed steel frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast etc, complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed.

M&L for PCC 1:3:6 type C1 as in hold fast, pressed steel frames and back filling of pressed steel frame, complete all as specified and directed.

S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated, complete all as specified and directed.

S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I, complete all as specified and directed.

M&L for preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F 300 mm long aluminum anodised sliding door bolts ,Aluminium alloy,door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed.

S&F Floor doors stoppers of aluminium alloy body and tounge anodisede with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed.

S&F mild steel 300mm helical door spring , ordinary rat tail rod patteren including roller and roller plate fixed to wooden frame or welded to steel frames, complete all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded but wood grain printed PVC sheet used and fixing in the frame, complete all as specified and directed

Dismantling of AC/fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings, complete all as specified and directed.

S&F in repair roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165), complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws, complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description, complete all as specified and directed.

S & F Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers, cleats, fasteners, complete all as specified and directed.

S & F gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving’s n exc 15cm thickness below or above ground level & removal out side MoD land, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection/floor sub base etc, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type BO using 12.5mm graded stone aggregate as in floor to receive tiles, complete all as specified and directed.

M&L for 40mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) finish even and smooth with using extra cement, complete all as specified and directed.

M&L for rubber Finish chequered cement concrete tiles 30cmx 30cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:4 etc, complete all as specified and directed.

S & F in repair steel rolling shutters with ball bearing, guide channel as directed including top covers anchoring rod, hasp and staple and one shop coat of primer, erect in position as directed complete push or pull or manual type having thickness of laths 1.00 mm, complete all as specified and directed.

All as per item No 105 above but gear operated type with bevel gear box and crank handle.

Demolition of stone slabs and tiles of any description or thickness etc, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over and including cement screed bed 20 mm thick in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

All as per item No 108 above but as in skirting over 10mm thick bedding layer in cement mortar 1:4.

JINDAL AND COMPANY

BEHL AND COMPANY

Deol Builders

JAI DURGA CONSTRUCTION COMPANY

M/S SANGA SINGH AND CO