Development of Parking near Monal Cafe, Dhalpur Kullu Phase-III ( finishing works)

Amount

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth with in all lead and lift disposed earth to be levelled and neatly dressed Pick work Jumper Work

Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level Tor Steel.

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in Foundation and plinth

Providing and laying cement concrete 1:1:2 (1 cement : 1 Sand : 2 graded stone aggregate20 mm nominal size) and curing complete excluding cost of form work. Foundation and plinth

Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1 : 6 :12 ( 1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size ) at plinth level in cement mortar 1 : 6 ( 1 cement : 6 sand )

Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in retaining walls including raking out of joints cement mortar 1 :6 ( 1 cement : 6 sand) (Rupees120.25 per Cum extra for Superstructure above plinth level and upto floor two level)

Providing & fixing MS Railing, 50/50 mm vertical ms pipe, 25/50 mm horizontal ms tube, vertical ms pipe 25/25 mm, with Red oxide paint ( Railing height 0.6m)

Steel work in single sections including cutting,hoisting, fixing in position and applying a priming coat of red lead paint In R.S.Joists,channels angles,tees

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,buttresses,plinth and string courses and the like.

Brick work using common burnt clay building bricks in foundation and plinth in Cement mortar 1:3 ( 1 Cement : 3 Sand) in Super-structure above plinth level upto floor two level (First class bricks)

20mm Lime plaster in two coats,backing coat 10mm thick with 1:3 (1 lime:3 surkhi)mortar and finishing coat 10mm thick with 1:2(1 Lime: 2 sand) mortar on fair side of brick/stone masonry/concrete wall for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete.

Cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 grade stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40 mm thick.

Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.

Providing and supplylng in standard length lSI mark high denslty Polyethylene HDPE Pipe suitable for potable water as per lS specification no. 4984/1995 lncluding all local and central taxes, trasnsportatlon, freight charges, octroi, lnspection charges, loading,unloading, conveyance to the dept. store etc. comp. 6.0 Kg/cm2 & Lowering, laying and joining HDPE pipes and specials of following classes and diameter (By buttfusion welding method) including cost of conveyance from stores to site of works including cost of labour, material, giving satisfactory hydraulic testing etc. comp.

Providing & installing Stainless Steel Automatic Boom Barrier including carriage of material in all leads & lifts.Make:- BGI Engitech Pvt. Ltd.

Supplying & installing safety fire bucket with stand having four buckets in one stand including carriage of material in all leads and lift.

Providing and installing stone benches of approx size 400 mm wide, 1000 mm long 400 mm high, etc complete including carriage of materials in all leads and lifts.

Stored Pressure Type Dry Chemical Powder (ABC) Fire Extinguishers With MAP 90% as per IS: 15683:2006, ISI Mark 9Kg. Capa., with gauge

Carbon di-Oxide type Fire Extinguishers as per IS: 2878, ISI Mark 9Kg. Capa. With ISI Mark