REPAIR/RE-CARPETING OF CERTAIN STRETCHES OF MAIN RAODS, ADJOINING, SHOULDERS, BERMS, KERBS INCL NECESSARY RAOD FURNITURES AT SEC A, B, C AND D AT MIL STN JNR

Repair to potholes and depth not exc 1 Sqm each including sweeping free from dustand mud or water scoring sunken surfaces in roads, paths etc., cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and applying a priming/tack coat @ 5 kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10 sqm, blinded with 0.09 cu m of stone chipping 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings).

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 Sqm and depth exceeding 50mm and n exc 100 mm stacking complete as directed.

Material and labour for preparing new scarified of black bituminous macadam top surfaces by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a priming/tack coat with paving bituminous VG-30 grade @ 7.5 Kg per 10 Sqm all as specified and directed.

Material and labour premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm ) to reqd gradient using paving bitumen any penetration of binder content of 4% (VG-30) by wt of total mix all as specified and directed.

Material and labour for preparing existing black top surface by brushing with wire brush for removing caked mud, dust etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a priming/tack coat with paving bitumineous VG-30 grade @ 2.5 Kg per 10 Sqm all as specified and directed.

Material and labour bituminous premix semi dense Asphaltic concrete 40 mm consolidated thickness with 5.5 % (bitumen VG-30) binder content weight of total mix using paving bitumen laid with mechanical paver and any penetration rolled and consolidated to reqd camber and gradient complete.

Material and labour for red/bajri 100mm thick (spread thickness) as in road side shoulders, spread rolled and compacted to using power roller exc 8 tonne & n exc 12 tonne complete all as specified and directed. Note: Moorum shall be brought from out side MD land royally if any shall be borne by the contractor. The rate includes for transportation of moorum irrespective of the distance involved.

Supply and fixing cat eye solar reflective type of metal body alloy size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, repairs including taking down of existing one complete all as specified and directed.

Material and labour for preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD land complete all as specified and directed.