Providing, Supply of 200mm Temper proof Air valve with isolating Sluice Valve, 300mm Sluice Valve and by back old dismantle/scrape/un usable material for Jalundra-Madhavgadh pipe line project

Name of Work:- Providing, Supply of 200mm Temper proof Air valve with isolating Sluice Valve, 300mm Sluice Valve

Item Quantities Item of work Rate Total Amount

Item Quantities Item of work Rate Total Amount

No. estimated In In words Unit according to

but may be Figures estimated

more or Rs. Ps. quantities

Item No.:- 01 Providing & Supplying Ductile Iron Single Chamber

Triple Function Tamper Proof Air Valve as per IS 1538/AWWA C-

512 with body & cover of Ductile Iron , SS Float and Gasket of

EPDM with liquid Epoxy Coating both inside & Out side, Flange

drilling as per IS:1538, SS Bolt & Fastners with Manually

Operated Double flanged Sluice Valve Non rising type Metal Forty Seven Thousand

1 75.000 seated sluice valve as per IS-14846/2000 flages drill to IS 1538 47575.00 Five Hundred and No

with H/Wheel Operated with both side Coating including S.S. Seventy Five Rupee Only

Nut & Bolts, all taxes excluding GST, insurance, transportation,

fright charges, octroi, inspection charges, loading, unloading

conveyance to departmental store, staking etc. complete.

For 200 mm With isolating sluice valve PN

Item No.:- 02 Providing & Supplying Ductile Iron Manually

Operated double Flange Resilient seated soft sealing sluice

valves with body bonnet of ductile iron/S.G. iron Wedge fully

rubber lined with EPDM food grade quality and seals of NBR

and valve should be vaccum tight and 100% Leak proof with Thirty Six Thousand

face to face dimensions as per BS 5163-89/IS 14846-2000/DIN Three Hundred Twenty

2 6.000 3202 F 4. all the valves should be with electrostatic powder 36328.75 No

Eight and Seventy Five

coating both inside & Outside including S.S. Nut & Bolts, all Paisa Only

taxes excluding GST, insurance, transportation, fright charges,

octroi, inspection charges, loading, unloading conveyance to

departmental store, staking etc. complete.

For 300 mm sluice valve PN

Thirty Seven Lakh Eighty Six Thousand Ninty Eight Rupees Only

I/We am/are willing to carry out the work at………………………...…% above/below.

Percent (Should be written in figures and words.) of the estimated rates mentioned above. Amount of my/our tender works out as under :-

Estimate Amount Estimate Amount Put to tender. Rs:

Put to tender.Rs: 3786098.00

%below Rs: Add……… %above.Rs:

In words.. In words

Note All works shall be carried out as per public works Department Handbook and other specification of Division or As directed.

Note All the columns is schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

Note Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions,

:3: site, moisture, weather etc..

Note To be continued on additional sheets, if found necessary.

Signature of the contractor: Signature of the Executive Engineer