Construction of New Building for Govt. Arts and Commerce College at Gambhoi, Dist- Sabarkantha

Name of work :- Construction of New Building for Govt. Arts

and Commerce College at Gambhoi, Dist-

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 8642.00 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

2 Excavation for foundation for depth from 1.5 m to 3.0 m 4446.80 Cum 170.40

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

3 Filling in plinth with sand under floors including watering 190.00 Cum 481.81

ramming, consolidating and dressing complete

4 Filling in foundation and plinth with murrum or selected soil 773.00 Cum 294.39

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

5 Providing and laying controlled cement concrete M.150 for 894.00 Cum 4058.18

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

6 Providing and laying controlled cement concrete M.250 and 2043.00 Cum 4405.42

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete.

7 Providing and laying controlled cement concrete M250 and 148.00 Cum 7238.67

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

8 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 101.00 Cum 2811.44

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

9 Providing and laying controlled cement concrete M.250 and 461.00 Cum 5997.38

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

10 Providing and laying controlled cement concrete M.250 and 307.00 Cum 7254.15

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

11 Providing and laying controlled cement concrete M.250 and 334.00 Cum 6040.40

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

12 Providing and laying controlled cement concrete M.250 and 689.60 Cum 6586.58

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

13 Providing and laying controlled cement concrete M.200 and 45.00 Cum 6395.32

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

14 Providing and laying controlled cement concrete M.200 and 17.00 Cum 6976.24

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

15 Providing and laying controlled cement concrete M.250 and 22.00 Cum 6993.10

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

16 Providing TMT Bar FE 500D reinforcement for R.C.C. 723530.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

17 Providing throating or plaster drip and moulding to R.C.C. 338.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

18 Brick work using Common Burnt Clay building bricks 1341.00 Cum 4514.36

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

19 Half brick masonry in common burnt clay building bricks 204.00 Sqmt 688.93

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

20 Providing & Fixing Chicken mesh for joint between brick 1061.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

21 Providing 15mm thick cement mala plaster in single coat on 8903.00 Sqmt 255.13

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

22 Providing 10mm thick cement mala plaster in single coat on 5644.00 Sqmt 231.59

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

23 20mm thick sand faced cement plaster with Gutka Finish on 4883.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) with 5mm grooves, etc. complete.

24 Providing Water Proofing Treatment on Sunk Slab including 235.00 Sqmt 370.67

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average

50mm thick to prepare slope including water proofing

chemical etc. Complete for Sunk Slab for All Floor.

25 Applying two coats of putty & two coats of primer of 11763.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

26 Wall painting (three coats) with plastic emulsion paint of 6173.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

27 Ceiling painting (three coats) with plastic emulsion paint of 5637.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

28 Finishing wall with weather proof exterior emulsion paint 7438.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

29 Providing and laying polished Blue Kota stone slab flooring 3193.00 Sqmt 1019.00

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1:1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

30 Providing and laying polished Blue kota stone slab 25mm 122.00 Sqmt 1166.93

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing etc.

31 Providing and fixing pre-cast Rubber Dye / steel Dye inter 287.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

32 Providing and fixing Machine cut & Polished Blue Kota 21.00 Sqmt 1355.42

stone in 7.5 cm width Strip flooring for Ramp even grade

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm

33 P & L Mate Finished Antiskid Ceramic 10 mm thick tile 235.00 Sqmt 1266.54

flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface

34 Providing and laying coloured glazed tiles of the size 300 801.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

35 Providing and fixing Machine cut, Free edges, Mirror 133.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

36 Providing and fixing Machine cut, Free edges, Polished 779.00 Sqmt 2510.86

Green Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

37 Providing and laying water prooofing treatment with china 1434.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

38 Constructing Sandwich Platform of 18mm thick polished 9.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including

all labour material of approved quality including full

moulded round front edge fixed in wall for partition.

39 Providing and fixing flush door with Single shutters, solid 14.00 Sqmt 4211.70

core construction with frame of Anodized Alluminium

section (weight not less than 1.1 kg/mt.) with cross board

and finished with 1 mm thick laminate on both side of

shutter, machine glued PVC beading on periphery including

30cm long Stainless Steel Pipe handle on both side SS ASIS

304 grade, SS Stopper 20cm, SS Aldrop 30cm both side,

anodised alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm

40 Providing and fixing flush door with Double shutters, solid 135.00 Sqmt 4720.74

core construction with frame of Anodized Alluminium

section (weight not less than 1.1 kg/mt.) with cross board

and finished with 1 mm thick laminate on both side of

shutter, machine glued PVC beading on periphery, including

30cm long Stainless Steel Pipe handle on both side SS ASIS

304 grade, heavy duty Floor Spring each side, SS Stopper

20cm, SS Aldrop 30cm both side, anodised alluminium butt

hinges with necessary screws. (B) Non-decorative type and

block board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

41 Providing and fixing FRP frame size 100x50 mm and 35mm 61.00 Sqmt 2615.04

thick FRP shutter having extra reinforcement on sides &

edges in polish finish. The core of the shutter & frame is to

be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

42 Providing and fixing window having extruded aluminum 27.60 Sqmt 2140.33

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt

kg/m, vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt

,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc complete for window.

43 Providing and fixing window having extruded aluminum 183.00 Sqmt 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

44 Providing and fixing window having extruded aluminum 48.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

45 Providing and fixing standared extruded of alluminium 364.00 Sqmt 1525.00

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

etc complete for Fix window

46 Providing and fixing Standard extruded colour anodized 12.00 Sqmt 1368.55

alluminium section frame weight 1.094 kg/Rmt.with

Adjectable Glass Louvers of 5 mm thick transparent glass

colour tinted float glass with transparent silicon gasket with

allu. Powder coated fittings & fixtures.

47 SIGNAGES ON DOOR :Providing and fixing 304 grade 75.00 Nos. 1262.50

stainless steel 1.5mm thick brushed steel finish plate fixed

on a door using S.S studs and with punched (laser cut)

lettering carried out on S.S plate of required size and text as

directed by engineer etc. complete. Size 30 cm x 15 cm

48 Providing erecting and fixing double coated ISI water tank 40000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

49 Providing, laying and jointing in true line and level 110 880.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

50 Providing, laying and jointing in true line and level 160 76.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

51 Providing laying and jointing in true line and level 50mm 186.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm 480.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 15mm

53 Providing 410.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing concealed center point to wall ceiling

54 Providing 45.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

55 Providing and fixing concealed center point to wall ceiling 240.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

56 Providing and fixing Gun metal check or non-return fullway 26.00 Nos. 420.63

wheel valve.(C) 25mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

57 Providing and fixing ball cock of approved. quality as 4.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

58 Providing and fixing wash down water closet (Wall Hung 18.00 Nos. 5172.51

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

59 Providing and fixing water closet squatting Pan (Indian type 6.00 Nos. 1637.50

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

and trap to be measured and paid for separately) (A)

Vitreous China.(I) Long pattern = White colour including

100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in

cement Mortar 1:1 (1-Cement : 1-Fine sand) with 25mm dia.

chromium plated brass half trun flush cock of approved

quality including fixing in pipe line xing G.I. inlet

connection for flush pipe with W.C. Pan etc. complete.

60 Providing and fixing Urinal or approved quality including 12.00 Nos. 1074.86

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

61 Providing and fixing washbasin (ii) Flat Back washbasin 20.00 Nos. 2180.72

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc. complete

62 Providing and fixing screw down bib taps of following 33.00 Nos. 186.83

size.(A) Brass screw down bib tap polished bright. (i) 15mm

63 Providing and fixing PVC SWR Nahni trap IS 14735 for 37.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

64 Providing and fixing S.W. gully trap with C.I. grating brick 18.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

65 Providing and fixing C.P. brass towel rail comlete with C.P. 18.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

66 Providing and fixing 600mm x 450mm bevelled edge mirror 12.00 Nos. 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

67 Providing and fixing in position PVC cowel went to pipes 6.00 Nos. 75.75

68 Constructing brick masonry chamber for underground C.I. 10.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

69 Providing and laying (to level or slopes) and jointing with 20.00 Rmt 531.18

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(B) 150mm dia.

70 Providing and laying (to level or slopes) and jointing with 20.00 Rmt 352.73

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(A) 100mm dia.

71 Applying general insecticide pest control treatment to floors, 1443.00 Sqmt 80.62

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

72 Providing and fixing Safety Grills of required pattern for 7897.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

73 Providing and fixing a set of wall mounted 38mm dia. U 6.00 Nos. 2323.00

shaped horizontal stainless steel collapsible grab bar, 38mm

vertical stainless steel fixed grab rail of grade SS 304 from

round pipe supported and 75mm dia 8mm thick SS 304 base

flange on wall including anchor fastners, nuts, accessories as

per detailed drawing etc. complete as directed by architect or

engineer in charge.

74 Providing and fixing of conspectus tape 50mm width on of 192.00 Rmt 1923.04

treads in staircase including cutting pasting etc. As per

harmonised guidelines complete in all respect to the entire

satisfaction of engineer in charge.

75 Providing and fixing 90 cm high Stainless Steel railing made 91.00 Rmt 3760.33

from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16

gauge) as hand rail with S.S.304 grade baluster of 32 mm

dia (16 gauge) as a vertical support fixed in RCC Slab/ steps

of stair at 1.2 mt. c/c including three horizontal S.S. pipes of

16 mm dia (16 gauge) at equal distance fixed by 16 mm dia

(16 gauge) S.S. pipe with baluster including accessories as

per detailed drawing as directwed etc. complete

76 Steel work, welded in built up sections framed work 569.00 Quintal 9108.49

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

77 Painting two coats (excluding priming coat) on external 118.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

78 Filling available excavated earth (excluding rock) in 9831.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

79 Gabian Structure for Retaining Earth (Providing and 11160.00 Cum 1560.45

construction of a gabain structure for retaining earth with

segments of wire crates of size 7 m x 3 m x 0.6 m each

divided into 1.5 m compartments by cross netting, made

from 4 mm galvanised steel wire @ 32 kg per 10 sqm

having minimum tensile strength of 300 Mpa conforming to

IS:280 and galvanizing coating conforming to IS:4826,

woven into mesh with double twist, mesh size not

exceeding 100 x 100 mm, filled with boulders with least

dimension of 200 mm, all loose ends to be tied with 4 mm

galvanised steel wire)

80 Laying of a geotextile filter between pitching and 5477.00 Sqmt. 753.46

embankment slopes on which pitching is laid to prevent

escape of the embankment material through the voids of the

stone pitching/cement concrete blocks as well as to allow

free movement of water without creating any uplift head on

81 Providing and laying in position Ready Mixed M-300 grade 1824.00 Cum 5226.82

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous

agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing and

reinforcement including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS 456 shall

be maintained) (Cement level 475 kg )

82 Providing formwork with sheathing steel sheet so as to give 153.00 Sqmt. 280.69

a finished surface including centering shuttering strutting

and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete

work in (Upto 10 ton) (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

83 Providing formwork with sheathing steel sheet so as to give 1037.00 Sqmt. 357.12

a finished surface including centering shuttering strutting

and propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal

of the same for in situ reinforced concrete and plain concrete

work in (Upto 10 ton) (C)Vertical surface such as walls (any

thickness) partitions & lime including attached pilasters

buttresses plinth & string course & like.

84 Brick work using common burnt clay building bricks having 182.30 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

85 Providing and laying controlled cement concrete M.150 and 66.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

86 Providing & laying weep hole in Aburtments, and returns by 3425.00 Each 86.73

using A.C. pipe of 100mm including laying in proper grede

and jointing the completed as per detailed specification.

87 Providing and laying - Filter Media 600mm thick directed at 2105.00 Sqmt 1238.93

the back of abutments, returns and wing walls as per detailed

specifications.

88 Providing and fixing concertina coil fencing with punched 1210.00 Rmt. 565.60

tape concertina coil 600 mm dia 10 mt openable length

having 50 no rounds per 6 mt length, upto 3mt height of wall

with existing angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge. placed 2.4mt or

3.00mt apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I.barbed

wire tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/intakewell.

89 Drilling of pilot bore hole of size 250/300 mm diameter at 250.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

90 Reaming of 250/300 mm diameter pilot bore hole to size 200.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

91 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

92 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

93 Supply of 200 mm diameter V-wire screen pipe of slot size 65.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

94 Supply of M.S. Bore clamps with 3 holes on either side with 1.00 Pair 1753.36

nuts and bolts of standard make and suitable size (g)

mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

95 Supply of Bore Plug having 100 mm height made from M.S. 1.00 Nos. 834.26

plate with 3 holes at equal distance on circumference for

nuts-bolts type, locking arrangement with nut-bolts & lock

nuts of standard make complete. (b) from 5 mm thick M.S.

plate (for top also) (ii) suitable for 200 mm dia. pipe.

96 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

97 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 8.00 Nos. 71.71

mm diameter and 150 x 150 x 6 mm size etc. complete.

98 Supply of Gravel of size selected size up to 4mm to 6 mm, 12.00 Cmt 2295.73

including stacking and filing etc. complete.

99 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

100 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

101 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

102 Providing and erecting PVC corrugated Flexible conduit 175.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (3) 32 mm diameter

103 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

104 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON-OFF isolator (AC - 3/23 duty) main fuses, single

phasing preventer, indicating lamps for R-Y-B phases,

overload relay, automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start-stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L&T, Seimens or BCH make only (a)

DOL upto 7.50 H.P.

105 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 200.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

106 Providing and fixing butterfly valve of IS approved brand 2.00 Nos. 1595.80

107 Excavation for foundation upto 1.5 m depth including 228.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

108 Excavation for foundation for depth from 1.5 m to 3.0 m 23.20 Cum 136.33

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

109 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 5.00 Nos 958.17

size having weight not less than 35Kg.

110 Clearing and grubbing road land including uprooting rank 4.00 Hectare 28455.10

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

111 Earthwork for embankment including breaking clods, 84988.90 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

112 Rolling and consolidation of soling including filling in 30459.60 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

113 Box cutting the road surface to proper slope and camber for 2188.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

114 Construction of B.I.T.C. granular sub base by providing 876.00 Cum 1132.02

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

115 Providing, laying, spreading and compacting stone 649.00 Cum 1507.20

aggregates of specific sizes to water bound macadam (Grade-

II) (B.T. Metal of size 45 to 63 mm) specification including

spreading in uniform thickness, hand packing, rolling with

wheeled steel/ vibratory roller in stages to proper grade and

camber, applying and brooming requisite type of screening/

binding Materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

116 Compaction and finishing of cement concrete road by trimix 4204.00 Sqmt. 72.72

process providing extra labour charges for the trimix vaccum

dewatering service process on cement concrete road surface

by using vaccum dewatering pump floater surface vibrator

including making rough finish to surface as per in including

levelling the complete.

117 Supplying and fixing reinforced concrete heavy duty non- 50.00 Rmt. 660.00

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

118 Construction of Cattle trap made from ISMC 100 border and 11.00 Sqmt. 6146.86

G.I. pipe 50 mm dia. Heavy duty at 12cm spacing by

welding and for supports 2 nos. I.S.M.C. 100x75x6 section

fixing in prepared chamber as per drawing.

119 Constructing Brick masonry road gully chamber 500mm x 20.00 Nos. 2017.20

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

120 Supplying of yellow or Goradu soil with all lead and lift 1807.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

121 Supplying of well rotted FYM manure with all lead and lift 91.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

122 Scarifying the surface of soil including spreading of DAP 4080.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

123 Supplying and planting Dibbling semi carpet lawn at 4080.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

124 Bowling and developing flowering plants grown in nursery 25.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

125 Bowling and developing flowering plants grown in nursery 50.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

126 Bowling and developing flowering plants grown in nursery 60.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

127 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

128 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

129 Bowling and developing flowering plants grown in nursery 50.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

130 Bowling and developing flowering plants grown in nursery 50.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

131 Bowling and developing flowering plants grown in nursery 50.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

132 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

133 Bowling and developing flowering plants grown in nursery 400.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

134 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

135 Bowling and developing flowering plants grown in nursery 50.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

136 Bowling and developing flowering plants grown in nursery 400.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

137 Bowling and developing flowering plants grown in nursery 400.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

138 Bowling and developing flowering plants grown in nursery 35.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

139 Bowling and developing flowering plants grown in nursery 40.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

140 Labour charges for planting various plantsafler proper anti- 1810.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

141 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

142 Providing laying and jointing in true line and level 40mm 250.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. and fixing brass screw down stop tap.(A) 15mm

143 Providing 10.00 Nos. 205.83

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

144 Rubber Hose Pipe 15 mm dia of approved brand and make 250.00 Rmt 90.90

145 Providing and fixing G.I. Nipple as directed 30.00 Nos. 50.50

146 Providing & Laying Rain Water Junction Chamber of Clear 15.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

147 Providing & Laying Filter chamber of brickwork 0.23 thick 15.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

148 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

149 A Pump Room. Supply & fixing Diesel engine driven min. 1.00 Nos. 555500.00

pump of S5 mt. head and 137 M3/ Hr. capacity with

RPM diesel engine with battery charger. Base plate, AVM

pad etc. complete as directed including necessary concrete

platform as directed. (Make:-L)

150 Fire Pumps & Accessories, Yard Hydrant, Internal Hydrant, 1.00 Nos. 153924.00

Hose Reel & Sprinkler System Supply, Installation, Testing

& Commisioning of Main Fire Pump Of Capacity 20 H.P.

with 55 mtr. Head, Pump

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

151 Supply, Installation, Testing & Commisioning of control 1.00 Nos. 90900.00

Panel suitable for automatic operation of fire fighting pumps

consisting (a) Necessary cabling, wiring, earthing from panel

to individual equipment shall be included in the quoted

price. (b) Facility for more selection i.e. auto or manual. (c)

Protection failure and control cabling. (d) Interlocking of

pressure switch with pumps.

152 Supply, Installation, Testing & Commisioning of 150mm 1.00 Nos. 3535.00

dia. Pressure Gauge of range 0 - 15 kg/cm3 confirming to as

per specification complete as required.

153 Supply, Installation, Testing & Commisioning of Pressure 1.00 Nos. 4545.00

Switches for automation of fire pumps, Pressure switches

shall be double pole, single throw type suitable for 3 phase

supply with diaphragm. Alluminium Enclosure with IP

protection as required.

154 Supply, Installation, Testing & Commisioning of the 80.00 meter 2390.67

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. a) 150 mm dia.

155 Supply, Installation, Testing & Commisioning of the 90.00 meter 1711.95

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. b) 100 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

156 Supply, Installation, Testing & Commisioning of the 20.00 meter 1277.65

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. c) 80 mm dia.

157 Supply, Installation, Testing & Commisioning of the 100.00 meter 1100.90

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. d) 65 mm dia.

158 Supply, Installation, Testing & Commisioning of the 90.00 meter 989.80

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. e) 50 mm dia.

159 Supply, Installation, Testing & Commisioning of the 80.00 meter 858.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. f) 32 mm dia.

160 Supply, Installation, Testing & Commisioning of the 300.00 meter 555.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. g) 25 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

161 Supply, Installation, Testing & Commisioning of C.I. 2.00 Nos. 9738.42

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. a) 150 mm dia.

162 Supply, Installation, Testing & Commisioning of C.I. 4.00 Nos. 8932.44

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. b) 100 mm dia.

163 Supply, Installation, Testing & Commisioning of C.I. 4.00 Nos. 5555.00

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required. d) 50 mm dia.

164 Supply, Installation, Testing & Commisioning of Cast iron 1.00 Nos. 9090.00

Dual plate Check valve (PN 1.6) a) 150 mm dia.

165 Supply, Installation, Testing & Commisioning of Cast iron 2.00 Nos. 7564.90

Dual plate Check valve (PN 1.6) b) 100 mm dia.

166 Supply, Installation, Testing & Commisioning S.S. Single 6.00 Nos. 5656.00

Headed Fire Hydrant Valve with 80mm N.B. Flanged inlet,

63 mm dia. Female instantaneous outlet type S.S. coupling,

blank cap, chain, twist release type lug & all accessories

Confirming to IS:5290. Including fixing with supports,

flanged tapping from wet riser, orifice plate.

167 Supply, Installation, Testing & Commisioning of Weather 3.00 Nos. 4595.50

proof standard M.S. Fire Hose Cabinet wall mounting type

(450mm x 450mm x 250mm deep) having single or double

opening with necessary locking arrangement by allan key

suitable for housing 1 nos. hose pipe, 1 nos. Branch pipe &

nozzle spanner.

168 Supply, Installation, Testing & Commisioning non 3.00 Nos. 5641.86

percolating rubber reinforced lined Fire Hose pipe (as per

IS:636) of 63mm dia and 15 mtr. Long. The hose shall be

rated for burst pressure pf 35.7kg/sqcm. Hose shall be

complete with ISI marked SS male & female coupling

(IS:903) bound & riveted to hose pipe with copper rivets &

1.5mm copper wire.

169 Supply, Installation, Testing & Commisioning of 63mm dia. 3.00 Nos. 5641.86

Instantaneous pattern SS 304, short branch pipe, 20mm dia

nozzle confirming to IS

170 Supply, Installation, Testing & Commisioning of First Aid 3.00 Nos. 6565.00

Hose Reel equipment conforming to 15:884 comprising of

hose reel drum, 8 mm shut off noz:z.le, Ru bber hose of

mm dia x 30 mtr. long, painting, swinging type fixing

bracket, anchor fastener, bolts & nuts etc.

171 Supply, Installation, Testing & Commisioning of SS Ball 3.00 Nos. 858.50

Valve. A) 25mm dia.

172 Supply, Installation, Testing & Commisioning of Cast Iron 2 1.00 Nos. 8585.00

Way Fire Brigade Inlet as per 1S: 904 having 63 mm dia

in/et with blank cap and chain with necessary fit ti ngs,

flanges, nut bolts etc. complete as required. (For Hydrant

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

173 Supply, Installation, Testing & Commisioning of Gun Metal 1.00 Nos. 959.50

Air Release Valve with necessary fittings. Size: 25mm (For

174 Supply, Installation, Testing & Commisioning of Quartzoid 156.00 Nos. 454.50

Bulb type Sprinkler Heads. A) Pendent Sprinkler 57°C

175 Fire Alarm System Alarm panel Microprocessor based 8 1.00 Nos. 16665.00

176 Manual Call Point 3.00 Nos. 454.50

177 2 core x 1.5 sqmm wire with pvc conduct and required 250.00 Rmt. 166.65

178 Smoke Detector 45.00 Nos. 1565.50

179 II) Fire Extinguisher and Exit Signages Supply, installlation, 5.00 Nos. 6447.84

testing and commissioning of Carbon Dioxide (CO2) type

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

marked / TAC approved fitted with required accessories

including wall suspension brakets.

180 Supply, Installation, Testing & Commisioning of ABC type 5.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

181 Signage Boards 30.00 Nos. 252.50

182 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 5.00 Sqmt 1311.18

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade

183 Providing and laying Ceramic tiles 6mm thick in skrting 1.00 Sqmt 1090.32

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

184 Excavation for foundation upto 1.5 m depth including 60.00 Cum 212.53

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

185 Excavation for foundation for depth from 1.5 m to 3.0 m 20.00 Cum 235.05

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

186 Half brick masonry in common brunt clay building bricks 15.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

187 Providing 15mm thick cement plaster in single coat on 88.00 Sqmt. 184.78

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

188 Providing and laying (to level or slopes) and jointing with 10.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

189 Providing and Constructing sock pit of 3.46 mt. dia outside 2.00 Nos 76345.90

and 6 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

190 Providing corrugated G.I. sheet of class-3 roofing fixed with 1054.00 Sqmt. 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

191 Demarkation of road alingment including marking out road 1.00 Km 2706.50

line by providing and fixing wooden pegs or steel rod of

required size at every 25 M to 50 M. including excavating

trenches ion both sodes of 0.30 m. x 0.30M. including

supplying of labours and all materials for every work etc.

192 Providing flood gauge marks on substructure as per design 4.00 Sq.m. 165.69

including painting complete.

193 Providing and laying boulders apron on river bed for 720.00 Cum. 1083.81

protection against scour with stone boulders weighing not

less than 40 kg each complete as per drawing and Technical

194 Excavation for foundation in sand, gravel, clay soft soils and 1237.00 cum 511.45

murrum etc. including shoring, strutting dewatering as

necessary and disposing of the excavated stuff as

directed.(A) Depth upto 3.0 M. and lead upto 100m for

195 Providing and filling in foundation with ordinary Cement 259.00 Cu.m. 3615.61

concrete M-150 mix and providing necessary vertical pin

headers including formwork, vibrating, ramming and curing

196 Providing and Casting in situ controlled Cement Concrete M- 906.00 Cu.m. 4659.10

250 for R.C.C. Raft and cutt-off walls including necessary

shuttering laying, vibrating, ramming and curing complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

197 Providing and casting in situ controlled cement concrete M- 706.00 Cu.m. 5266.33

250 for R.C.C. return as per drawings including centering

shuttering, scaffolding where necessary, laying vibrating,

curing and finishing complete.(A) Height from 0.0 to 5.0 M.

(1) Piers (2) Abutment (3) RCC return

198 Providing and casting in situ controlled cement concrete M- 644.00 Cum. 5397.06

250 for R.C.C. solid slab including centering, scaffolding,

curing and finishing complete.

199 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 441.00 Pt. 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

200 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 310.00 Pt. 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed..(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat-

III (Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

201 Point wiring for Individual Plug with & earth wire of 1.5 57.00 Pt. 510.05

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

202 Point wiring for on board Looped Plug with 6A Modular 215.00 Pt. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories.Cat-III

(Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

203 Providing following type of Modular Type Accessories 6.00 Ea 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two Pin/RJ-11

Telephone Socket[A] For One Gang Cat.III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

204 Providing following type of Modular Type Accessories 3.00 Ea 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

205 Providing following type of Modular Type Accessories 215.00 Ea 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank Plate

Single Cat.III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

206 Providing following type of Modular Type Accessories 60.00 Ea 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (8) Computer RJ-

45 socket Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

207 Providing following type of Modular Type Accessories 51.00 Ea 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

208 Providing following type of Modular Type Accessories 51.00 Ea 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

209 Providing and erecting ISI mark Medium class RIGID PVC 2315.00 Mtr. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b) 25 mm

210 Providing and erecting ISI mark Medium class RIGID PVC 370.00 Mtr. 54.54

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (c) 32 mm

211 Providing & erecting PVC Corrugated Flexible Conduit with 385.00 Mtr. 21.21

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm

212 Providing & erecting PVC Corrugated Flexible Conduit with 205.00 Mtr. 27.27

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm

213 Supplying and laying UPVC cable trunking system 63.00 Mtr. 428.24

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes (2) 100 mm x 50 mm trunking

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

214 Providing and erecting Mains with 1.1 KV grade FRLS PVC 5691.00 Mtr. 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm (Make: -

RR Kabel, Havells, Avocab, KEI,Johnson)

215 Providing and erecting Mains with 1.1 KV grade FRLS PVC 2640.00 Mtr. 112.11

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

216 Providing and erecting Mains with 1.1 KV grade FRLS PVC 675.00 Mtr. 425.21

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm ) (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

217 providing and erecting Mains with ISI marked, 1.5KV grade 198.00 Mtr. 91.91

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

218 providing and erecting Mains with ISI marked, 1.5KV grade 199.00 Mtr. 300.98

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (i) One wire 35.00 sq. mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

219 providing and erecting Mains with ISI marked, 1.5KV grade 117.00 Mtr. 470.66

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (j) One wire 50.00 sq. mm

220 Supplying and erecting Flexible PVC insulated multi strand 376.00 Mtr. 22.22

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. (c) 1.00 Sq.mm

core round/ flat PVC sheathed

221 Supplying and erecting Flexible PVC insulated multi strand 767.00 Mtr. 31.31

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. (d) 1.50 Sq.mm

core round PVC sheathed

222 Supplying and erecting Flexible PVC insulated multi strand 336.00 Mtr. 46.46

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

223 Providing & Erecting approved make following size of TV 135.00 Mtr. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC

insulation. e).RG-11

224 Supplying & erecting approved make Telephone Cable 150.00 Mtr. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured.

225 Supplying & erecting approved make LAN cable of 1920.00 Mtr. 47.47

following size in existing pipe as per direction [C] CAT -

226 Providing & erecting main Distribution (MDF) indoor type, 6.00 Ea 994.85

back mounted frame as per DoT standard approved with

krone strips (a) Suitable for 10 pair

227 Supplying & erecting M.S. Box having 16 Gauge painted 13.00 Ea 88.88

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size. (c) 200 mm x

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

228 Providing & erecting Switch board for Computer or electric 60.00 Ea 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-

III (Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

229 Decorative call bell Ting-tong box type 250 volts complete 8.00 Ea 71.71

230 Supplying and erecting LED indoor fittings with LEDs of 331.00 Ea 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with

integral/ non-integral driver . (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

231 Supplying and erecting led lamps with following wattage 32.00 Ea 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (i) 5 to 8 watts Cat-III

(Make:- Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

232 Supplying and erecting LED indoor fittings with LEDs of 25.00 Ea 1794.77

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) LED Panel Light

with provision for Plane front frame with translucent cover

fixed to housing complete.IP20 (vi) 36 watts, 24" x 24",

Surge- 2KV Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

233 Supplying and erecting LED street light / Flood light fittings 25.00 Ea 4997.48

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

shown.)(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with over-

voltage protection.(ii) above 48 to 60 Watts Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

234 Supplying and erecting LED street light / Flood light fittings 12.00 Ea 8453.70

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(v) above 120 to 160 watts Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar)

235 Supplying and erecting LED street light / Flood light fittings 12.00 Ea 10818.11

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(v) above 120 to 160 watts Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar) (vii) above 200 to

watts Cat-III (Make:- Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

236 Supplying and erecting LED street light / Flood light fittings 2.00 Ea 4819.72

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (ii)32-

40W Cat-III (Make:- Wipro, LT,Philiphs,Havells,Jaquar)

237 Providing and erecting Approved make Four pole moulded 28.00 Ea 6173.12

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

238 Providing and erecting Approved make Four pole moulded 17.00 Ea 8055.76

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

239 Providing and erecting Approved make Four pole moulded 5.00 Ea 20946.39

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A.

with variable thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

240 Providing and erecting Approved make Four pole moulded 4.00 Ea 25228.79

case circuit breaker having breaking capacity ICU of 50 KA

and above at 415 V having Normal current rating 400A.

with variable Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

241 Providing and erecting Approved make Earth fault Relay 2.00 Ea 5415.62

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected

in existing M.S.housing. (3) 250 A -400 A , CT Ratio 1/400

242 Supplying & erecting approved make Four Pole 415V 1.00 Ea 22255.35

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(F)400A Cat-III (Make:- Indoasian, L&T (LK), ABB,

243 Supplying and erecting triple pole & neutral 440V / 500V 13.00 Rn.Mtr 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

244 Supplying and erecting triple pole & neutral 440V / 500V 7.00 Rn.Mtr 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

245 Supplying and erecting triple pole & neutral 440V / 500V 2.00 Rn.Mtr 7319.47

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. capacity

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

246 providing and erecting Miniature circuit breaker single pole 51.00 Ea 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III (Make:- Indoasian, L&T (LK), ABB,

247 Providing and erecting Miniature circuit breaker single pole 164.00 Ea 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat-III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

248 Providing & erecting 240 V MCB double pole switch for 7.00 Ea 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

249 Providing & erecting 415 V MCB Four Pole for Motor & 17.00 Ea 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (B.) for 63 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

250 Providing and erecting Sheet Steel powder coated MCB 1.00 Ea 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet

steel double door (IP-43) (iv)12 way

251 Providing and erecting Sheet Steel powder coated MCB 13.00 Ea 2913.85

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (ii)6

way (Make:- Indoasian, L&T (LK), ABB, Schneider)

252 Providing and erecting Approved make RCCBs conforming 40.00 Ea 2235.13

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (iI) 40 Amps.DP Cat. III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

253 Providing and erecting metallic vitrified danger notice board 7.00 Ea 69.69

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

254 Providing and erecting Annealed bare Copper wire 8 to 16 51.61 Kg. 794.87

255 Providing and erecting Pipe type earthing having 150 25.00 Ea 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

256 For using salt and charcoal / coke as required for pipe type 25.00 Ea 171.70

257 Supplying & erecting earth pit of minimum bore dia.150mm 11.00 Ea 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

258 Providing & erecting weather proof, dust & vermin proof, 13.00 Sq.Mtr 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size. (B) The standard companies switch gear

shall be used and only manufacturers at CPRI approved

factory (i) with 350mm depth

259 Providing , erecting , fabricating the M.S. structure as per 520.00 Kg 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted

with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

260 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 450.00 Mtr. 220.18

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

261 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 460.00 Mtr. 284.82

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (C) 3 1/2 core 50 Sq. mm (

25 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

262 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 120.00 Mtr. 378.75

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (

35 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

263 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 260.00 Mtr. 540.35

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (F) 3 1/2 core 120 Sq. mm (

70 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

264 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 350.00 Mtr. 904.96

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (H) 3 1/2 core 185 Sq. mm (

95 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

265 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 210.00 Mtr. 1747.30

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (K) 3 1/2 core 400 Sq.mm (

185 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

266 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 310.00 Mtr. 117.16

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (A) 4 core 4 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

267 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 680.00 Mtr. 140.39

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (C) 4 core 10 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

268 Making trench in soft soil of suitable width of 90 cm deep 1255.00 Mtr. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

269 Making trench in Hard Murrum / Tar Road of suitable width 627.50 Mtr. 74.74

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

270 Making trench in Hard Murrum / Tar Road of suitable width 251.00 Mtr. 357.54

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal (B) If additional

machinery like hammer driller or JCB use [Add]

271 Providing & laying. R.C.C. Hume pipe for cable to be laid 65.00 Mtr. 263.61

90 cm. below ground across the road crossing or on floor

with necessary material in an approved manner and making

the ground as per original. (E)150 mm dia

272 Providing & laying approved make Double walled 1615.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer Dia

273 Providing & laying approved make Double walled 518.50 Mtr. 137.36

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (D)

120 mm Outer Dia

274 Providing & laying approved make ISI marked Rigid PVC 30.00 Mtr. 236.34

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The pipes

as following size of dia & weight per 6 mtr. (F) 110 mm

inner Dia. (11.63 Kg/6 RMT)

275 Providing and, fixing heavy duty flange type brass cable 24.00 Ea 33.33

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

276 Providing and, fixing heavy duty flange type brass cable 54.00 Ea 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (C) 2 to 4 core 10 Sq. mm

277 Providing and, fixing heavy duty flange type brass double 12.00 Ea 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

278 Providing and, fixing heavy duty flange type brass double 12.00 Ea 103.02

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (C) 3 & 1/2

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

279 Providing and, fixing heavy duty flange type brass double 4.00 Ea 140.39

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (E) 3 & 1/2

core 120 Sq. mm

280 Providing and, fixing heavy duty flange type brass double 4.00 Ea 238.36

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (G) 3 & 1/2

core 185 Sq. mm

281 Providing and, fixing heavy duty flange type brass double 2.00 Ea 369.66

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (J) 3 & 1/2

core 400 Sq. mm

282 Solder less crimping type Aluminium lugs conforming to IS 96.00 Ea 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

283 Solder less crimping type Aluminium lugs conforming to IS 216.00 Ea 13.13

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (B)

284 Solder less crimping type Aluminium lugs conforming to IS 48.00 Ea 20.20

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

285 Solder less crimping type Aluminium lugs conforming to IS 48.00 Ea 25.25

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (E)

286 Solder less crimping type Aluminium lugs conforming to IS 16.00 Ea 45.45

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (G)

287 Solder less crimping type Aluminium lugs conforming to IS 16.00 Ea 80.80

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. ( I )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

288 Solder less crimping type Aluminium lugs conforming to IS 8.00 Ea 110.09

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (L)

289 Providing and erecting Approved make Ceiling fan with 310.00 Ea 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton, Havells, Orient)

290 Supplying and erecting 19 / 20 mm. nominal bore Medium 310.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

291 Supplying & erecting fan hook box of 10 mm M.S. round 310.00 Ea 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

292 Supplying & erecting single phase approved make industrial 45.00 Ea 2054.34

exhaust fan suitable for medium duty ring mounted low

noise operation suitable for medium duty having following

dia size and maximum speed in RPM [A] 305 mm dia

RPM Cat.II (Make:- Crompton, Havells, Orient)

293 Supplying and erecting approved make Octagonal pole made 25.00 Ea 8192.11

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 59 kg

294 Supplying & erecting approved make SMC press moulded 14.00 Ea 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (b)

250mm x 200mm x 100mm [deep]

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

295 Providing street light pole bracket comprising main B Class 25.00 Ea 561.56

MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fastners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple

with check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket

296 Supplying & erecting approved make Digital time switch 4.00 Ea 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

297 Supplying & erecting power contactor ,AC3 duty for time 4.00 Ea 2782.55

switch complete erected as per direction Cat III [D] 4 pole

440V 40 Amp.(Make:- Indoasian, L&T (LK), ABB,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

298 Supplying, erecting, testing, commissioning approved make 2.00 Ea 141616.14

M.S. Polygonal High Mast Pole having following general

(a) Polygonal Section fabricated from M.S. Plate confirms

BSEN 10025 & Hot deep galvanized minimum 65/86

micron (as per IS 2629 /1985) Lantern carriage with ring and

rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm dia

S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No. Lightening

arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core

ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting reversible

motor and switchgears having door not more than 1400mm

x 300mm with waterproof gasket & hinges & locking

(f) Pole structure comprises suitable size of reversible motor,

cable and necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness

supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns.

(i) Necessary Cement Concrete foundation as per IS

including testing & commissioning of the entire structure for

following size of High Mast poles [1] High Mast 12 Mtr.

TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No. -

299 1, Bottom Thickness

Supplying & erecting- 3 mm,

dualSizechannel

of Base amplifier

Plate - Dia ,power

handling capacity of 180 watt ,four micro phone inputs with

independent level control ,built in FM tuner,with preset

memories,USB drive & SD card for MP3 playback ,100v

/telephone input with priority and VOX,frequency response-

80 Hz to 18k Hz Philips / /distortion less than 1% @ rated

power up to 50 units [[Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

300 Supplying and erecting wall mount speaker with rated power 35.00 Ea 2569.44

of 30 watt/power tapping 30/15/7.5 watt available,opening

angle 180 degree H * 77 degree V ,sound pressure level

dB ,frequency response of 70Hz to 20KHz [[Approved by

Competent Authority i.e. not Below the rank of Executive

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

301 Providing and erecting cordless microphone with UHF 4.00 Ea 5135.85

Diversity handheld wireless microphone/caller wireless

complete with receiver and transmitter unit,Cardiod ,polar

pattern,dynamic microphone,LCD display for battery and

frequency status and information ,32 preset channels,with

compatible groups of 8 channels,14 hrs.battery

life,frequency response 80Hz to 18KHz.,RF sensitivity <1.0

Uv,image rejection > 55 dB,dynamic range >95 dB and

receiver having 32 channels,S/N ratio>100 dBA,Dynamic

range>95 dB,distortion<1% [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

302 Providing and erecting approved make split air-conditioning 11.00 Ea 36819.55

unit consisting of copper condensing unit with fan motor,

hermetically sealed rotary compressor with accessories etc.

duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied

proper insulated copper tubing,drain PVC pipes suitable for

( cost includes powder coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control) with necessary

core cutting.(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

(b) for 1.5 ton capacity

303 Supplying and erecting insulated pair of soft copper tubing 59.00 Rmt. 965.56

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up

to 4 TR capacity

304 Providing & Erecting full SS Body (SS 304) Split type water 6.00 Ea 61115.10

cooler having storage capacity 160 to 175 Ltr.(Tank SS 304)

& Cooling capacity 150 ltr. Per hour @ an ambient temp of

350 C.The outlet temp. of the water should drop by 150C

within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A,

fan motor, Copper Condensing unit with company fabricated

Outdoor Unit water tank surrounded by evaporating coil,

thermostats, relay etc.complete with necessary copper tube

& Insulation, M.S Chanel Stand with Painting for water tank

& M.S. Powder Coated Stand for Outdoor unit with

Installation. With DPELCB and 4 Way DB Box with

accessory Three core Cord for connection.(Make:- Blue

Star,Usha,Voltas)

305 Supplying and erecting water filter cum purifier with ultra 6.00 Ea 5424.71

violate technology. (Aquaguard / waterdoc model or

equivalent symphony/ crystal/videocon model)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

306 Supplying & erecting 5 stage single reverse osmosis water 6.00 Ea 29187.99

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed[C] 50 Ltr / Hr with 150 psi 2 nos

307 Supplying and erecting approved make panel mounting type 10.00 Ea 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

308 Supplying and erecting approved make panel mounting type 10.00 Ea 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

309 Providing & erecting L.T. Current Transformer with bar 30.00 Ea 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

310 Supplying and erecting approved make suitable panel 30.00 Ea 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

311 Providing & erecting open well horizontal mono block 2.00 Ea 15707.52

pump set with cast iron body, complete for three phase

submersible motor having[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

312 Supplying & erecting approved make motor control 2.00 Ea 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make only.(A)

DOL up to 5.0 H.P.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

313 Providing and erecting ISI marked PVC insulated PVC 80.00 Mtr 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

314 Providing Water proof straight Joint in PVC insulated flat 2.00 Ea 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

315 Supplying of following size of HEAVY UPVC column pipe 65.00 Rmt 359.56

with coupler and wire lock [B] 50 mm dia

316 Supplying, & erecting C.I. swing, check type non-return 2.00 Ea 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

317 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe as

directed by Engineer - in - charge with necessary plumbing

as desired.[D] 50 mm dia

318 Supply, Installation, Testing & Commissioning of following 35.00 Per KW 42455.35

size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall Profile,

Front Cover : High Transmission Low-Iron Tempered Glass

(AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 19.5%-

22%, Normal operating temperature 45'C, Junction Box

with Waterproof IP67 & MC4 Compatible and Enclosed

with Bypass diodes, 100% Electroluminescence test to

ensure error free Modules, Thep. temp. co-efficient of the

PV module shall equal or better than -0.45%/degree C. Solar

PV modules of minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear

Power Warranty includes all mechanical and electrical

parameters of the Solar panel. Modules must be complied to

the DCR(Domestic content requirements). The Ration of AC

to DC is 5:6 for the Installation capacity which are given in

AC KW. Integrated, Input Reverse Polarity Protection

Integrated, Insulation Resistor Detection Integrated,

Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage Protection

Power Warranty includes all mechanical and electrical

parameters of the Solar panel. Modules must be complied to Rates Total Amount

parameters of the Solar panel. Modules must be complied to Rates Total Amount

the DCR(Domestic contentItemrequirements).

of work The Ration of AC Quantity Unit

No. In figure to estimated

to DC is 5:6 for the Installation capacity which are given in Rs. Ps. quantities

AC KW. Integrated, Input Reverse Polarity Protection

Integrated, Insulation Resistor Detection Integrated,

Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: The mounting (Rectangular pipe /

square pipe / circular pipe) with requisite cross bars, nuts

and bolts, etc. shall be Hot deep galvanized with minimum

80micron coating. The Rectangular / square /circular hollow

pipe section used for the structure should have a minimum

thickness of 2.0 mm. other than above, the material

thickness should be minimum 2.5 mm. A certificate of a

structural engineer certifying the strength and stability of the

mounting structure to withstand the weight and wind speed

of 150 km/hour throughout the life span of 25 years of the

system, shall be submitted by the vendors. Hot Dipped

Galvanized steel coils. suitable arrangement for base plate

for foundation , solar panel mounting, the structure should

be suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j

bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality.The ground clearance of

the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility

requirement. a. Column –The minimum section (thickness)

should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be

40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the

CEIG drawing approval, lightining arrester system as per the

CEIG drawing approval, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is

included in agency scope (Excluding All charges namely

GEDA Application fees, Solar connectivity Charges, Meter

of 150 km/hour throughout the life span of 25 years of the

system, shall be submitted by the vendors. Hot Dipped Estimated

Rates Total Amount

Rates Total Amount

Item Galvanized steel coils. suitable arrangement for base plate according

Item of work Quantity Unit to estimated

No. for foundation , solar panel mounting, the structure should In figure

be suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j 3 4 5

bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality.The ground clearance of

the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility

requirement. a. Column –The minimum section (thickness)

should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be

40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the

CEIG drawing approval, lightining arrester system as per the

CEIG drawing approval, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is

included in agency scope (Excluding All charges namely

GEDA Application fees, Solar connectivity Charges, Meter

connectivity Charges, Meter testing Charges and system

stability/strenthning charges.) (C ) Grid Tied Solar Power

System: 11 - 25 kW (3 - phase)

Total Cost of Construction Cost

Deputy Executive Engineer

R&B Sub Division

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…199840026.1 Put to tender Rs.199840026.1

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Dismentalling of Credit materials amounting of Rs. __________ must be recovered from Contractor's

respective R.A. Bill.

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division

Himmatnagar Himatnagar