99/EDCB/2023-24

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-I Bareilly Approx. distance upto 80 Km. Including safe loading and unloading.

ST Pole 11 Mtr

ACSR Weasal

LT XLPE Cable 1x240 sqmm

11 KV Incoming Panel (VCB)

11 KV Outgoing Panel (VCB)

11 KV XLPE Cable size 3x300 sqmm

11 KV XLPE Cable size 3x185 sqmm

11 KV Outdoor Cable Jointing Kit suitable for 11 KV 3x300 sq mm XLPE Cable

11 KV Outdoor Cable Jointing Kit suitable for 11 KV 3x185 sq mm XLPE Cable

11 KV Straight through Cable Jointing Kit suitable for 11 KV 3x300 sq mm XLPE Cable

Other Line material

Dismantling and removing of old and used/damaged 11 KV VCB ( Incoming & Outgoing) in Control room including opening/cutting of power cable connection and earthing strip with dragging/cartage from control room to J.E. Store.

Erection/Installation of following new panel (VCB) in control room including grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply.

11 KV Incoming Panel (VCB)

11 KV Outgoing Panel (VCB)

Providing cutting, fixing and welding of MS Strip from existing, earthing to new 11 KV VCB Complete in all respect, all material shall be arranged by the Contractor.

Installation of 11 KV Fuse Set at various DT complete in all respect

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

ST Pole 11 Mtr long (Single)

ST Pole 11 Mtr long (Double)

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

ST Pole 11 Mtr long (Single)

ST Pole 11 Mtr long (Double)

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Laying, Stringing & Sagging of Following Conductor complete in all respect

ACSR Weasal Conductor

Laying of LT Cable 1x240 sq mm complete in all respect

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Under Ground Laying of 11 KV XLPE Cable 3x300 sqmm in Single Circuit as per norms complete in all respect

Under Ground Laying of 11 KV XLPE Cable 3x185 sqmm in Single Circuit as per norms complete in all respect

Filling of Cable Jointing Kit complete in all respect

Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)

Stone Pad 300x300x75 mm

Holding Clamp for fuse set

Holding Clamp for T Off, Cross Arm and Expouser Pole

F Clamp with Nut & Bolt

Painting Number Mark with Paint

Top Channel & Dropper Clamp

E Bracket

Aluminium Paint

Red Oxide Paint

Aluminium Lug 240 Sqmm with Nut & Bolt

PG Clamp

Danger Board With Clamp

Barbed Wire

G I Pipe Dia 6"

Clamp

Nut Bolt with washer

Safe back carriage of Following item (if any) from work site to C.B. Ganj store Bareilly approx distance upto 10-80 Km including loading & unloading.

Scrap

M A ELECTRICALS

BHARAT ELECTRICAL TRADERS