Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 CrAccepted-AOC 101 | ₹2.2 Cr Quoted ₹2.7 Cr | L1 | Accepted-AOC AGREEMENT DONE |
| 2 | L2₹2.7 CrRejected-Finance GRAM BHURAVLI KA PURA POST LAHAR TEHSIL KALARAS DISTRICT MORENA M P | MORENA | MADHYA PRADESH | 476001 | ₹2.7 Cr | L2 | Rejected-Finance Committee had decided to sanction lowest rate |
| 3 | L3₹2.7 CrRejected-Finance 1 A6 D K PARK RUPALI CANAL BHATAR ROAD SURAT 395007 GU | SURAT | SURAT | GUJARAT | 395007 | ₹2.7 Cr | L3 | Rejected-Finance Committee had decided to sanction lowest rate |
| 4 | L4₹2.8 CrRejected-Finance | ₹2.8 Cr | L4 | Rejected-Finance Committee had decided to sanction lowest rate |
| 5 | L5₹2.9 CrRejected-Finance | ₹2.9 Cr | L5 | Rejected-Finance Committee had decided to sanction lowest rate |
Tender Value
₹3.5 Cr
EMD Value
₹3.5 L
Closing Date
5 Jan 2026, 5:30 pmClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER PUBLIC HEALTH ENGINEERING DIVISION UMRALI NAKA ALIRAJPUR
Balance work of JJM Piped Water Supply Scheme under Jal Jeevan Mission at Village 1 MATHNA 2 SEJAWADA distt. Alirajpur
2025_PHED_457818_2
32/2025-26
Open Tender
Civil Works - Water Works
180 days
Alirajpur
as per nit
4 documents required · 4 mandatory
₹15,000
₹3.5 L
1 Apr 2026
22 Dec 2025
7 Jan 2026
22 Dec 2025
5 Jan 2026
22 Dec 2025
Earth work in Excavation for pipe trench in all kinds of soil and WBM in areas including dressing, watering and ramming and disposal of Excavated earth lead upto 50 meters and lift upto 1.5m, disposal earth to be leveled, neatly dressed. USOR. Item.no. 16.4 -P.no.207
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road In ordinary or Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR. Item. no. 16.6-(a) P.no.208
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no.16.15.1-P.no.209
Providing & laying mechanically mixed cement concrete 20mm nominal size graded crushed stone excluding cost of centering & shuttering. 1:2:4 (M-15) . USOR.Item.no. 16.23 (a) (II)-P.no.210
Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 90 mm dia HDPE 6 Kg/cm²
Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 110 mm dia HDPE 6 Kg/cm²
Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 160 mm dia HDPE 6 Kg/cm²
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, Class PN 10, 80mm dia, USOR 4.41 P- 71
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, Class PN 10,100 mm dia, USOR 4.41 P- 71
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, Class PN 10,150 mm dia, USOR 4.41 P- 71
Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 , 90mm dia 6 kg/sq.cm
Providing and laying including testing Bend 90̊ confirming to IS specifications.USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 110 mm dia 6 kg/sq.cm
Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 160 mm dia 6 kg/sq.cm
Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no. 10 90mm dia 6 kg/sq.cm
Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no.10 110mm dia 6 kg/sq.cm
Providing and laying including testing equal tee confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no.10 90 mm dia 6 kg/sq.cm
Providing and laying including testing equal tee confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no.10 110 mm dia 6 kg/sq.cm
Providing and laying including testing equal tee confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no.10 160 mm dia 6 kg/sq.cm
Providing and laying including testing reducer confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no.11 90 x75 mm dia 6 kg/sq.cm
Providing and laying including testing reducer confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no.11 110 x90 mm dia 6 kg/sq.cm
Providing and laying including testing reducer confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no.11 160x140 mm dia 6 kg/sq.cm
Providing and laying including testing End Cap confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.8 -P.no.11 , 90 mm dia 6 kg/sq.cm
Providing and laying including testing End Cap confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.8 -P.no.12 110 mm dia 6 kg/sq.cm
Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler 90mm ,USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. . 9.14.1.8 - P.no.16
Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure ratedSDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler 110mm ,USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. . 9.14.1.10 - P.no.16
Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange, GI Reducer UPVC MTA FTA etc. as per requiement of site i/c cost of labour etc. complete as per approved specification and as directed by Engineer in charge USOR 17.19 P 228
Provision for jointing of Rising main to sump well/OHT and OHT to Distribution pipe line with cost of material/specials such as Bends, MTA as per rerquirement of site i/c cost of labour with excavation, labour as per requirement complete as per approved specification and as directed by Engineer in charge.USOR 17.20 P-229
Construction of Brick masonry valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 110x80x100cm with - Heavy Duty SFRC chamber cover with frame size 130cm x 100cm x 10cm including cost of materials, labour etc. complete. USOR 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020 p-7
Filling available excavated earth in trenches, lead up to 50m and lift up to 1.5m in all kind of soil excluding watering and ramming.. USOR.Item.no.16.10 (b)-P.no. 208
Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.2 -P.no. 1
Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item., For connection with 20 mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) . USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.3 -P.no. 1
Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.4 -P.no. 1
Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.5 -P.no. 2
Design, drawing, construction, testing and commissioning of GSR/Sumpwell of following capacities with all necessary fitting and accessories as mentioned in the relevant chapter of USOR, IS codes and departmental circulars. Complete turn key job for following capacities :- 20 Kilo Litres USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 USOR 26.2 P 17
capacities :-30 kl
Design and Construction of RCC framed brick masonry pump house over the sump with all necessary fitting and requirement as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job. This item will only be used with item no 26.2 only in cases where pumphouse to be constructed above the proposed sumpwell. USOR 2nd ADDENDUM OF Issued vide order no. 254 dt 06.08.2020 USOR 26.3 P 18
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) - All kinds of soil. MPPWD SOR Item 2.6 page 13
Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. - Ordinary rock MPPWD SOR Item 2.7.1 page 13
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete. Thermo-Mechanically Treated bars.(TMT) MPPWD SOR Item 5.16.6 page 79
Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : M 20 -Grade Concrete MPPWD SOR Item 5.2.1 page 75
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level. MPPWD SOR Item 5.9 page 76
Lintels, beams, girders, bressumers and cantilevers. - Coping sides MPPWD SOR Item 5.9.5 page 77
Foundations, footings, bases of columns, etc. for concrete up to plinth level.MPPWD SOR Item 5.9.1 page 76
Columns, Pillars, Piers, Abutments, Posts and Struts. MPPWD SOR Item 5.9.6 page 77
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) MPPWD SOR Item 4.1.1.4 page 38
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters,columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor two level, excluding the cost of centering, shuttering and finishing : With 20mm nominal size graded stone aggregate.M 20 - Grade concrete - Coping MPPWD SOR Item 4.2.1.2 page 39
Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand) MPPWD SOR Item 6.6.2 page 109
12 mm cement plaster of mix :1:6 (1 cement : 6 sand) MPPWD SOR Item 13.1.2 page 397
Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work ( Two or more coat applied @ 1.67 ltr/10 sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5 mm on horizontal surfaces with an elongation of 150 % and water proofing of upto 3 bars on vertical surface. MPPWD SOR Item 13.52 page 405
Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. MPPWD SOR Item 2.25 page 18
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. MPPWD SOR Item 10.2 page 278
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. MPPWD SOR Item 13.69.1 page 408
Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. . MP PWD SOR No. 11.66 P. NO. 325
Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. 3.0 H.P. Head mt. 15-24 Discharge LPM 615-195 USOR.Item.no. 24.20.113 P.no.268
Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239-2011 Part-II. 50 mm dia Class Medium , USOR 6th &7th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 17.8.1 -P.no.32
Supply & erection of readymade mini pump house (control panel box) GI sheet of 18 gauge of size 90cmx90cm x60cm with 40x40x5mm angle Iron frame to fix it 200mm below ground level with hold fasts grouted in foundation and 300mm above ground level for clearance suitable for fixing of control panel, fuse unit, main switch etc. as per approved specification.USOR item 17.18, P - 227
11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area including labour complete. (Schedule Ref. C-1.2 of MPMKVVCL for SOR 2019-20)
11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP including labour complete. (Schedule Ref. C-5.2 of MPMKVVCL for SOR 2019-20)
11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line including labour complete. (Schedule Ref. C-5.1 of MPMKVVCL for SOR 2019-20)
L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter including labour complete. 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger)(Schedule Ref. D-3.2 of MPMKVVCL for SOR 2019-20)
11/0.4 KV out-door type transformer sub-station. 25 KVA on 140 kg. 8.0 meter long PCC Pole including labour complete.(Schedule Ref. E-1.1 of MPMKVVCL for SOR 2019-20)
Earth work in excavation by mechanical means (Hydraulic exavator)/manual means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) i/c disposal of exacavated earth,lead upto 50 m & lift upto 1.5 m ,disposed earth to be leveled & neatly dressed.Soft rock with or without blasting or bituminous pavement/cement concrete road. (C) Hard rock requiring chiseling / where blasting is prohibited.PHE SOR 16.6 (c) P- 208
Supplying and installation of energy efficient 5 star rated BEE rating ISI marked required capacity three phase centrifugal mono block inline booster pump set excluding cable. 15-20 M head and 350 LPM TO 270 LPM.2 H.P. phe usor 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020 Item.no.17.37.3 -P.no.3
Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable.5.0 H.P. Head Mt.15-24, Discharge LPM 930-420 .PHE USOR 24.20.113 (ii) P- 268
Providing and fixing following check (non-return) valves Class-I, confirming to IS-778/1984 (Reaffirmed 2005) female ends, tested to 21.09 kg/sq.cmt.50 mm dia flange .PHE SOR 16.8 P- 86
Supply & Filling moorum for pipe bedding or over the pipe ( including supply of moorum ) .PHE SOR 16.11 (a) P- 208
Design, drawing, construction, testing and commissioning of Elevated Service Reservoir/ Over Head Tank (ESR/OHT) with all necessary fitting as mentioned in relevant chapter of USOR, IS codes and departmental guidelines. Complete turn key job for following capacities with 9/12/15 meter staging height from GL 125kl/15 mtr .PHE SOR phe usor 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020
Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler 160mm ,USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.14.1.12 -P.no. 17
Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site,transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Equal Tee. USOR.6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.14.2.9 -P.no. 17 110 mm dia HDPE
Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, inpressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site,transit insurance, loading, unloading, stacking etc. complete. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.14.2.8 -P.no. 17, Electro Fusion Equal Tee 90 mm dia HDPE
Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, inpressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Reducer USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.14..4.13 -P.no. 18, 110 x 90 mm dia
Steel work in welded built-up section/ framed work,including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar,ladder , railings, brackets, gates and similar works PHE SOR 16.25 (d) II P= 211-212
Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.Hard muram MPPWD SOR item 2.27.1 p-19
Providing and fixing G.l chain link fabric fencing of required width in mesh size 25 x 25 mm made of G.l wire of dia. 3 mm including strengthening with 2 mm dia. Wire or nuts, bolts and washer as required complete with posts of angle iron size 50x50x5mm 2.5 meter apart and strut of required size including bottom to be split and band at right angle in opposite direction for l0 cm length and drilling holes upto l0 mm dia and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix l:2:4 (l cement:2 sand :4) graded stone aggregate 40 mm nominal size) every l5s post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineering charge. PHE USOR II amnd. 17.35 P- 3 Issued vide order no. 254 dt 06.08.2020
Fabrication, Providing and fixing of typical information board of size 1.50mX0.90m made out as detailed belowl. Tow vertical support (post) made out from ISA angle 50.X50X6mm this shall be minimum 0.75m below GL and 2.25m above GL. The vertical post shall be erracted on 450mmX450mmXl000mm foundation blocks (250mm above GL and 750mm below GL) made of cement concrete 1:2:4. 2. The board shall be fabricated from l.6mm thick MS sheet of size 1.50mX0.90m, The frame of board shall be fabricated with angle ISA 40X40X6 cross member support from'behind and flat 20X5mm support all around board. 3. Whole structure shall be painted by standard color with lettering, border, heading, and logo etc using synthetic enamel paint of superior quality including supply, welding, excavation, concreting, painting of base, border and lettering, painting and other required details etc complete as directed by Engineer in charge USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 17.48 -P.no. 32
Finishing walls with Acrylic Smooth exterior paint of required shade : New work ( two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10sqm) PHE SOR 16.42 (1) P- 216
Providing, fixing including testing following double flanged cast iron (horizontal cast) pipe per IS : 7181 of 2.75 M length 100 mm dia PHE SOR 3.5 P- 34
Providing, fixing including testing following double flanged cast iron (horizontal cast) pipe per IS : 7181 of 2.75 M length 150 mm dia PHE SOR 3.5 P- 34
Providing & fixing of following Cast iron double flanged sluice valves as per I.S.:14846- 2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 80 mm dia PN 1.6 PHE SOR 8.1 P- 111
Providing & fixing of following Cast iron double flanged sluice valves as per I.S.:14846- 2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 100 mm dia PN1.6 PHE SOR 8.1 P- 111
Providing & fixing of following Cast iron double flanged sluice valves as per I.S.:14846- 2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete 150 mm dia PN1.6 PHE SOR 8.1 P- 111
Construction of Brick masonary valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 110x80x100cm M-20 RCC chamber cover size 130x100cmx120cm including cost of materials, labour etc. complete. PHE SOR 16.45 P- 217
Providing and laying in position including testing following cast iron double flanged 90° Duck Foot Bend. Heavy Class 100 MM dia PHE SOR 3.14 P- 38
Providing and laying in position including testing following cast iron double flanged 90° Duck Foot Bend. Heavy Class 150 MM dia PHE SOR 3.14 P- 38
Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS1239/2011 Part-II 20 mm dia medium PHE SOR 6.1 P- 86
Providing for Lightning Conductor
Providing Water level Indicator
Aluminium Ladder
Providing and laying of 80 mm thick factory made cement concrete interlocking paver block of M-30 grade
Water Profing treatment over roof wall chhaja balcony
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.49 MB
nitmathnasejawada.pdf
Tender Documents • 6.47 MB
BOQ_552916.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid