8354 MAINT/ REPAIR TO CERTAIN TILING OF WALL/ FLOORING WORK, PCC FLOORING WORK ETC, INCL INT ELECT OF OTM/ MD ACCN OF R AND OFLT MES COLONY UNDER GE (EAST) BAREILLY

Amount

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.

Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement etc complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed

M&L for non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for non- skid glazed joint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n exc 0.36 sqm, in dado/skirting etc including 10 mm thick rendering in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement including to match coloured tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles (square/ rectangular) with border in vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified light shade colored ceramic tiles 10 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over including cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror finish incl screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror polish complete including rendering, 10mm thick CM 1:4 on vertical surface complete all as specified directed.

M&L for 18 mm thick granite of black colour (table rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M&L in replacement for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in replacement for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in replacement of factory made pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) kerb stone including weathering, slightly rounded or chemferred angles and throating complete all as specified and directed.

M&L in replacement for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick masonary wall surfaces or on fair faces of brick masonary in cement mortar 1:4 finished even and smooth using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as on concrete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying cement slurry over existing roof surface @ 3 Kg/Sqm inculding mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4 over RCC roof slabs for laying water proofing treatment including mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note for item No. 33 & 34: The Cost of Water proofing liquid shall be deemed to be included in this item)

M&L for PCC 1:5:10, type E-2 (using broken brick aggregate) as sunken sub base of floor fillings complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified , including filling of PCC 1:4:8 complete all as specified and directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified , including filling of PCC 1:4:8 complete all as specified and directed.

S&F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F 150 mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S&F steel windows with pressed steel frame (size 95x 45x 1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open in side) dovetailed or welded complete all as specified and shown on Drg No TD/088 dt 07 Jan 2002. Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane (upto 3 story building) including Hacking out old, broken glass (any thickness,) size quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all specified and directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in replacement stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in ms window / wooden shutter complete all as specified and directed

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing or composite panel LDPE core PET coating (both side decorative type) fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 63x38x1.48mm thick with rawl plug (b) Middle and lock rail : 85x44x1.48mm thick (c) Bottom rail : 114x44x1.48mm thick (d) Top rail/style : 114x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (g) Making good of wall surface to match with existing surface complete.

S&F Powder coated aluminium sliding windows and frame with movable shutter (sliding on minimum two PVC roller of best quality on two tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:- (i) Window frame : 63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) Aluminium fittings such as aluminium suitable fittings for auto interlocking closing (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium sliding windows and frame with movable shutter (sliding on minimum two PVC roller of best quality on two tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:- (i) Window frame :63x35mm X 1.15 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F in replacement Powder coated aluminium ventilators box type with louvers & wire mess neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter: 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F for aluminium powder coated frame hollow sections members of size 63.50 mm x 38mmx 1.48 mm thick, 4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for kithen cabinet / cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on pvc edging, design of shelf as per site requirements basis, complete all neccessary fitting complete all as specified and directed.

S&F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails, bottom rails and middle rail of size 63.50 mm x 38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided complete all as specified and directed.

S&F 12 mm thick toughned glass door with powder coated aluminium frame including neccessary locking, handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass, off cuts complete with finishing wall in CM 1:4 complete all as specified and directed.

S&F 12 mm thick toughned glass partion wall with or without powder coated aluminium frame with any type of eaching designed on tougned glass, off cuts complete as requirement of site with arrangement for suitable height with off cuts complete all as specified and directed.

M&L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/ sqm shape as ordered with frame channel of 34 X 11mm X 1.7mm thick fixed with screw inside of the window complete all as specified and directed.

S&F in replacement Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as specified and directed.

S&F in replacement door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dut fixed complete all as specified and directed.

M&L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.

S&F in replacement PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.

S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed.

S&F in replacement 300mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

S&F in replacement 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed

S&F in replacement vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all s directed.

S&F vitreous China corner wash hand basin, size 250 mm x187mm or suitable size & any design approved by GE including 15mm dia fancy CP pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all directed.

S&F in replacement vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling, waste pipe, complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F vitreous china counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specifed and directed.

S&F in replacement fancy type 150mm size square brass CP shower rose complete all as specifed and directed.

S&F in replacement 15 mm dia pillar tap fancy type chromium plated, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified directed.

S&F in replacement 15 mm bore dia bib tap fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified directed.

S&F 15 mm bore dia fancy type chromium plated brass two way bib cock with wall flange suitable complete all as specified and directed.

S&F in replacement fancy type brass chromium plated toilet paper holder, complete all as specified.

S&F in replacement 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm, complete all as specified.

S&F in replacement stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified and directed.

S&F in replacement fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.

S&F in replacement fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed.

S&F in replacement of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in replacement 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed.

S&F in replacement Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360x675x750 mm, S Trap-300 mm including making good to floor complete all as specified and directed.

S&F in replacement fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.

S&F in replacement vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.

S&F in replacement vitreous China coloured European type WC with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.

S&F in replacement, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. Model: Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32, Parryware Cat No 8177*, Cera Cat No B1810110 snow white"

S&F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.

S&F in replacement PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in replacement PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F in replacement PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F in replacement PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.

S&F in replacement 0.8 mm thick stainless steel kitchen sink size 590x 460x 230mm undermount, single bowl (bowl size 540x410x230 mm), including waste pipe & SS coupling, washers etc. with all necessary fittings complete all as specified and directed.

S&F in replacement stainless steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack complete all as specified and directed.

S&F in replacement MS steel work in tubular trusses for sign board posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240, complete all as specified and directed.

S&F in replacement Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165 complete all as specified and directed.

S&F 1.25 mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete including cutting out of existing sheet if required complete all as specified and directed.

S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart including dismantling complete all as specified and directed.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed.

M&L for applying two coats of white wash on old decorated or undecorated ceiling surfaces including preperation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down and applying two coat of cement based paint on old decorated or undecorated wall surface complete all as specified and directed.

M&L for applying two coats of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 4 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One 5A flush type socke out let t point on same board board

One light point controlled by two Nos of 2 way switches

One 5A flush type switch socket point on independent board

All as per Srl item No 124 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S&F switch piano flush type single pole, two way 5/6 Amps complete all as specified and directed.

S&F switch piano flush type single pole, one way 15/16 Amps complete all as specified and directed.

S&F ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

S&F Lamp holder (batten/angle) PVC/ Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.

S&F in replacement buzzer, capton ding dong, AC, 230V, sigle pole complete all as specified & directed.

S&F bell push switch flush type, 240 Volts, complete all as specified & directed.

S&F in replacement socket outlet, 3/5 pin 5 amp flush type, 240 Volts, complete all as specified & directed.

S&F in replacement socket outlet 2 in 1, 3/5 pin 5 and 15 Amp flush type, 240 Volts, complete all as specifiedand directed.

S&F in replacement Modular switches 1 way, 6 A, 1 module, 240 Volts, complete all as specifiedand directed.

S&F in replacement Modular switches 1 way, 16 A, 1 module, 240 Volts, complete all as specifiedand directed.

S&F in replacement Modular sockets 6 A,-2/3 pin combined 2 module, 240 Volts, complete all as specifiedand directed.

S&F in replacement Modular switches 1 way, 6 A, 1 module, 240 Volts, complete all as specifiedand directed.

S&F in replacement Hylem sheet 3mm thick of size 8'' X 11'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in replacement Hylem sheet 3mm thick of size 8'' x 5'' including cutting of sheet for fixing switch / socket complete all as specified and directed.

S&F in replacement Hylem sheet 3mm thick of size 5'' x 5'' including cutting of sheet for fixing switch / socket, complete all as specifiedand directed.

S&F in replacement MCB SPN 20 to 32 Amps 240 volts, 10kA, complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 Amps 240 volts, 10 kA, complete all as specified and directed.

S&F in replacement MCB TPN 63 Amps,415V, 10kA, complete all as specified and directed.

S&F in replacement MCCB 16 kA, 125 Amp thermal magnetic and electronic earth leakage module complete all as specified and directed.

M&L in replacement Sub main wiring concealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 2.5 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

M&L in replacement Sub main wiring concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

S&F in replacement sheet metal enclosure DB's 415 Volts, IP-42, vertical suitable for mounting MCCB's, TPN, 4 way with 200 Amps rated copper bus bar complete all as specified and directed.

S&F in replacement double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 4 ways complete all as specified and directed.

S&F in replacement double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways complete all as specified and directed.

S&F in replacement double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 20 watt 4 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed.

S&F in replacement building security light led type 20 W including GI angle of 20/25mm size of suitable size complete all as specified and directed.

S&F in replacement of PVC non metallic casing caping of 25 mm size with accessories including dismantling/ takingdown of old unserviceable/broken PVC conduit/cashing caping fixed on surface/concealed inclduing making good the disturbed surface complete all as specified and directed.

S&F LED mirror light fixture 9W LED 6000K complete all as specified and directed.

S&F in replacement in replacement PVC insulated Flexible twin core,copper cable multistranded 24/.0020sqmm, 1100 V grade complete all as specified and directed.

Taking down and refixing ceiling fans 1200/1400 mm sweep & removing/cleaning of dust properly, oiling and greasing of bearing including re-fixing and connecting up with all requisite accessories complete all as specified and directed.

Taking down and rifixing exhaust fan of 450/300 mm sweep and removing/cleaning the dust properly including oiling and greasing complete all as specified and directed.

Re-winding of ceiling fan burnt motor of 1200/1400 mm sweep including internally and externally cleaning of fans and removing the burnt coil and re-winding of fans by super enameled copper wire of appropriate size and re-assembling the fans and connecting with flexible copper wire of one mtr length and testing after repair complete all as specified and directed.

Re-winding of exhaust fan burnt motor of 450/300 mm sweep with appropriate size of super enameled copper wire, including re-assembling the fans and connecting with flexible copper wire of one mtr length complete all as specified and directed.

S&F in replacement fan regulator resistance/electronic step piano type single phase 230 volt complete all as specified and directed.

S&F in replacement Condenser 2.5 Mfd complete all as specified and directed.

S&F name plate light smart decorative light of 6W complete all as specified all directed.

M&L for earthling complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directrly in ground (earth pit not less than 2.25 mtr deep blow GL with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of vharcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 32 x 6 connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GL earth strip and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type B1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 Mtr, Provision of charcoal and slat complete all as shown in electrical plate No 3 of schedule SSR Part-I. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning filling, removing, PCC chamber pit RCC cover, test point etc.

S&F LED post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover, Alumnium PDC heat sink, opal PC diffuser and clear acrylic Jupiter type of 40 watt complete all as specified and directed.

S&F or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections complete all as specified and directed.

S&F in replacement 1.5 sqmm FRLS multi-stranded copper wire complete all as specified and directed.

S&F in replacement 2.5 sqmm FRLS multi-stranded copper wire complete all as specified and directed.

Taking down of unserviceable bolt of existing geyser, M&L for grouting of bolt (tee type) at new place and refixing of geyser of any type and any capacity complete all as specified and directed.

M&L in replacement and re-filling of glass wool as per norms of different type of geysers complete all as specified and directed.

S&F in replacement heating element 2.0 KW as triangular type/ circular type as per sample complete all as specified and directed.

S&F inner shell of geyser capacity 25/35 liters of suitable size made of copper sheet of 22 SWG complete with all suitable accessories complete all as specified and directed.

M&L for replacement of bottom cover in two parts of MS sheets not less than 22 gauge and pre treated in finished in white stove enameled paint as per existing size gauge in the geyser of any capacity/ size complete all as specified and directed.

Supply only safety pressure valve with vent to geysers as per latest ISI specification complete all as specified and directed.

M&L for painting the outer surface of geyser capacity 25/35 ltrs as per original shade with two coats of synthetic enamel paint over a coat of primer by spray gun after scrapping the existing paint, denting etc. filling depression with putty and refixing the geyser in position including water/electric connection and testing complete all as specified and directed.

M&L for Brazing/ welding to inner copper tank at leaking spots up to five leakage of geyser of capacity 25/35/50 liters of any type and make of tank after checking up worn out nuts bolts and washers complete all as specified and directed.

S&F assembly of geyser 25/35/50 ltr. capacity complete all as specified and directed.

S&F in replacement Indicator lamp with new indicating lamp round/square, rectangular type as required at site, SP 230 Volt complete all as specified and directed.

S&F in replacement PVC connection flexible heavy grade 45 cm long complete with chromium plated flair nuts with washers at both ends suitable for GI tubing 15 mm bore complete all as specified and directed.

S&F in replacement thermostat 0 to 90 degree, ISI marked, 15 Amps capacity automatic cut off at desired temp of suitable size for Geyser complete all as specified and directed.

S&F in replacement Plug top 15 Amps complete all as specified and directed.

prabhave traders (BID ID -3150865)

M/S SAJJAD HUSSAIN CONTRACTOR (BID ID -3149464)

KUSH TOMAR (BID ID -3144344)

j u enterprises (BID ID -3144451)