ADDN/ALTN TO BLDG NO. SP-28 ,VARIOUS JCOs/OR BATHROOMS AND SPECIAL REPAIR TO BLDG NO. PH-161 (TARAPORE) AT SUKNA MIL STN UNDER GE SUKNA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 10mm thick cement morter backing coat in CM 1:4, complete all as specified and as directed.

M & L for double charged premium quality vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for double charged premium quality vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces such as skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 10mm thick cement morter backing coat in CM 1:4, complete all as specified and as directed.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM (1:4), complete all as specified and and as directed.

S&F anodised aluminium snap grid of size 605x605mm frame work for false ceiling hangers 6mm dia GI (upto 1200mm length) adusting level fixed to roof slabs by means of ceiling cleats made out GI flat iron 40x3mm size 60mm long and fixed expansion hold fasteneners 12.5mm dia and 40mm long, complete all as specified and as directed.

S & F 4mm thick Non-asbestos fibre cement decorative/designer building boards to steel frame work with screws in ceiling (flat and/or slopping) and including jointless finish with & also including joining compound and tape as per manufacturer instructions, complete all as specified and as directed. Notes :- (i) The board shall be confirming to IS-14862 and shall be manufactured from the homogeneious mixture of cement, quartz and cellulose and shall be curred with high pressure steam using auto claving process. (ii) Aluminium frame work shall be measured and paid for separately.

Taking down cement plaster on brick or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6), on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed. Note:- WPC shall be measured and paid seperately.

M&L for rendering 5mm thick in CM (1:3) on concrete surfaces of ceiling/Chajja/Facia of chajja etc, finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, disposing off the retrieved debris outsite the premises, complete all as specified and as directed.

Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc, disposing off the debris outsite the premises, complete all as specified and as directed.

S&F standard aluminium power coated (minimum thickness of powder coating 50 micron) aluminium section as in frame for doors, windows / ventilators, Fixed/ Openable / side hung/ sliding two or three track or in any pattern, partitions, kitchen cabinet/almirah etc, cut to size etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM ubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. , complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories (including Aluminium mongries etc) required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered for payment. (iii) Cost of all the items, accessories & Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, wire cloth shall be measured and paid separately under respective items.

S&F 4.8mm thick sheet glass of ordinary quality and glazing for steel surrounds with & including oil putty, in squares exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F 4.8mm thick sheet glass of ordinary quality and glazing for steel surrounds with & including oil putty, in squares n.exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F 4mm thick sheet glass is ground or obscured or frosted, on one side and glazing for steel surrounds with & including oil putty, in squares n.exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F 4mm thick heat absorbing glass and glazing complete with aluminium beads , in squares exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.

S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.

S&F Factory made 35mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F Factory made 30mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

M&L for 2nd class hard wood (Hollock/Kalasiris/Brjsal/Gamari) (kiln seasoned and chemically pressure treated) 30 mm thick glazed and skeleton shutters, open rebated and prepared to rceieve glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a), complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and shown on drawing for SI No. 08095 on Srl Page No. 180 of SSR (Part-II) and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,, complete all as specified and shown on drawing for SI No. 08080on Srl Page No. 176 of SSR (Part-II) and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified and as directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt, 125 mm long of extruded section, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt, 150 mm long of extruded section, complete all as specified and as directed.

S&F 150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed.

S&F 100 mm size aluminium handle, cast type, anodised, complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.

S&F 100mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.

S&F in repair 25mm bore harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed.

S&F in repair floor door stopper 150mm (overall length of cover plate) of aluminium alloy body and tongue, anodised, with hard rawn steel spring, fixed in floor, complete all as specified and as directed.

Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and as directed.

M&L for granite (of any type) 20mm thick (Table rubbled and polished ) in n steps, jambs, pillars, window-cills, cooking platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick screed bed in CM (1:4), complete all as specified and directed.

S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors and including taking down of old ones, complete all as specified and as directed.

S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors including taking down of old ones, complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

S&F in repairs, vitreous china, 1st quality, squatting pan, Orrisa pattern of approx size 260 x 580 x 440mm, white with integral foot rests, 'P' trap including making connection to trap, flush pipe, anti-syphonage pipe etc, complete all as specified and directed.

S&F in repair vitreous china wash basin, 1st quality, white, flat back, approx size 550x400mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.

S&F in repairs PVC valveless, double syphonic action type, flushing cistern, low level of 10 Litres capacity, white, with and including inlet, ball valve, float, 32mm dia flush pipe of polyethylane of low or high density or PVC, flushing bend & handles, also including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet & making connections, complete all as specified and as directed.

S&F in repairs swivel shower of PTMT any colour for fixing with 15mm pipe. Minimum weight 40gms), complete all as specified and as directed.

S&F in repairs shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms, complete all as specified and as directed.

S&F in repairs 15mm dia, two way bib cock, fancy type, chromium plated, complete all as specified and as directed.

S&F in repair angle stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and as directed.

S&F in repairs bib tap, fancy type, long swan neck, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed.

S&F toilet paper holder cromium plated fixed with plugs with chromium plated brass screws, complete all as specified and as directed.

S&F in repair brass CP wall mixer for mixing hot & cold water with connection to overhead shower with 115mm long bend pipe and wall flange, screwed down for iron pipe and 15mm bore fixed, complete all as specified and as directed.

S&F in repairs Pillar taps with Aerator, fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.

S & F in repair health faucet 12mm dia with 1.25 metre long flexible tube attachment to wall hook and connection with angular stop cock, complete all as specified and as directed.

S&F in repairs corner glass self fixed with chromium plated brass screws and cup washers for fixing, complete all as specified and as directed.

S&F in repairs tubular towel rail, 20mm dia, D type, brass chrormium plated, 600mm long between flanges, complete all as specified and as directed.

S&F towel ring, chrormium plated fixed with plugs with chromium plated brass screws, complete all as specified and as directed.

S&F soap dish,brass cromium plated fixed with plugs with chromium plated brass screws, complete all as specified and as directed

S&F stainless steel grating 75mm dia, complete all as specified and as directed

S&F in repairs brass chromium plated shower roses, 125 mm size with or without swivel joints (including Shower Arms) to 15mm bore steel pipe or union, complete all as specified and as directed.

S&F in repairs towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) , complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary standard PVC stay clamps etc, complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary standard PVC stay clamps etc, complete all as specified and directed.

S&F in repair 40 mm bore high density poly?ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

S&F 110mm bore PVC (SWR) Junction, single (single T) equal or unequal with and including rubber ring joints, complete all as specified and directed.

S&F 75mm bore PVC (SWR) Junction, single (single T) equal or unequal with and including rubber ring joints, complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm (diameter of outlet), plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends (any radius) with and including rubber ring joints, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends (any radius) with and including rubber ring joints, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75 mm bore, complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for providing 75mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate), as in sub base of floor/path etc. complete all as specified and directed.

M&L for providing 100mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate), as in sub base, complete all as specified and directed.

M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate), as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3:1), complete all as specified and directed.

M&L for cement concrete (1:2:4) type, B0 (using 12.5 mm graded crushed stone aggregates) as in roof kerbs, rounded or chamfered or hounching in Chajja to prevent water seepage into brick walls, including necessary formwork, and scalfolding upto height of 8mtr, complete all as specified and as directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type three-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, complete all as specified and as directed.

S&F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20 mm bore, complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 15mm bore (Minimum weight 210 grms), complete all as specified and as directed.

Excavating in trenches n.exc. 1.50m wide and n.exc 1.50m in depth for foundation, laying of cable, pipe etc and n.exc 10Sqm on plan & not exc 1.5m in depth for manhole etc and getting out in soft/loose soil, complete all as specified and directed.

All as per item No 86 above but depth exc. 1`.5m and n.exc 3m.

Excavation over areas, not exceeding 1.5 metre deep in soft/loose soil and getting out, complete all as specified and as directed..

Excavation over areas, exceeding 1.5m deep but n exc 3.0m in soft/loose soil and getting out, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed.

Removing excavated material to a distance not exc 50.00 mtr and depositng where directed at a level n.exc 1.5m above the stating point, complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregates for 150 mm bore pipes as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed

S&F in repair 150 mm bore SGSW pipe, grade 'A', laid in trenches including jointing with cement mortar, complete all as specified and directed. Note:- Excavation & Earth Work, PCC bed & haunching shall be measured & paid for separately.

Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.

Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for Brickwork with fly as Bricks(old size), straight or curved on plan exc 6m mean radius built in Cement morter (1:4), complete all as specified and directed

M&L for brick work with fly ash Bricks(old size), straight or curved on plan to any radius built in CM (1:4) as in half brick thick walls, complete all as specified and as directed.

M&L for reinforced cement concrete (1:11/2:3) type A-1 (using 20 mm graded chrushed stone aggrgates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including dismantling, complete all as specified and directed. Note: Reinforcement and Form Work shall be measured and paid for seperately.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjas landings and similar work, not exceeding 200mm thick (horizonal or slopping) for rough finished flat surfaces of concrete, complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls, applying two coats of wall care Putty (minimum thickness of two layers shall be 1.5mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment from the internal surfaces of wall etc, applying two coats of wall care Putty (minimum thickness of two layers shall be 1.5mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of wall care Putty (minimum thickness of two layers shall be 1.50mm) and thereafter applying two or more coats of 100% Premium acrylic emulsion weather coat paint @ 1.43 ltr/10 sqm (for two coats) paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from the walls, applying two coats of wall care Putty (minimum thickness of two layers shall be 1.5mm) and thereafterapplying two coats of wall care Putty (minimum thickness of two layers shall be 1.50mm) and thereafter applying two or more coats of 100% Premium acrylic emulsion weather coat paint @ 1.43 ltr/10 sqm (for two coats) paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white washing, complete all as specified and directed .

M&L complete removal of existing treatment from the ceiling and applying three coat of white washing, complete all as specified and directed .

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for Preparation of steel and iron surfaces of any description duly applied with shop coat of primer, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint, complete all as specified and as directed. Note : Cost of application of shop coat of primer not included in this item.

M&L preparation of old painted surfaces of steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L preparation of old painted surfaces of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed .

M&L preparation of old painted surfaces of wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for precast Reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggrgates ) set in CM 1:4 as in landing, cover slab (for manholes, chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

M&L making good with cement mortar (1:6), under cills or over arches, lintels and bressummers including all pinning when necessary, complete all as specified and as directed.

Dismantling wrought iron as in rafters, purlins, truss etc and/or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and as directed.

S&F steel work in tubular trusses, purlins, rafters, Fan Hook & similar work including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, also including necessary welding etc complete all as specified and as directed.

S&F plates of Grade Fe 410-W (Gde E-250) quality - B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attacment including welding or riveting etc, complete all as specified and directed.

M&L for the Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed.

S&F rolled mild steel for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated, conforming to Fe 410-W (Gde E-250 quallity A), complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S & F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling and anodised aluminium snap grid of size 605x605mm frame work for false ceiling hangers 6mm dia GI (upto 1200mm length) adusting level fixed to roof slabs by means of ceiling cleats made out GI flat iron 40x3mm size 60mm long and fixed expansion hold fasteneners 12.5mm dia and 40mm long, complete all as specified and as directed.

S & F 5mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling and anodised aluminium snap grid of size 605x605mm frame work for false ceiling hangers 6mm dia GI (upto 1200mm length) adusting level fixed to roof slabs by means of ceiling cleats made out GI flat iron 40x3mm size 60mm long and fixed expansion hold fasteneners 12.5mm dia and 40mm long, complete all as specified and as directed.

S & F 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap, complete all as specified and as directed.

M&L decorative type plaster of paris work size not less than 50mmx50m as in cornice or juction of wall and ceiling, complete all as specified and as directed.

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , complete all as specified and as directed.

M&L for second class hard-wood plain fillets sectional area n.exc 3sq.cm as in square,rectangular or tringular in section, clean sawn, secure with nails or brads, complete all as specified and as directed.

M&L for second class hard-wood plain fillets sectional area exc 3 sq.cm and n.exc 6sq.cm as in square,rectangular or tringular in section, clean sawn, secure with nails or brads, complete all as specified and as directed.

M&L for second class hard-wood plain fillets sectional area exc 6 sq.cm and n.exc 13sq.cm as in square,rectangular or tringular in section, clean sawn, secure with nails or brads, complete all as specified and as directed.

M&L for second class hard-wood plain fillets sectional area exc 13 sq.cm and n.exc 25sq.cm as in square,rectangular or tringular in section, clean sawn, secure with nails or brads, complete all as specified and as directed.

M&L in repair 6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work as in shelves, complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, complete all as specified and as directed. Notes:- Reinforcement and Form Work shall be measured and paid for seperately.

M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts, complete all as specified and as directed.

M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded crushed stone aggregates) as in Chajjas, complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations/footings, bases of columns, raft and raft-beams, sides & soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished flat surface of concrete, complete all as specified and as directed.

Use and waste of formwork to square, rectangular or polygon sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, ressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similer items including edges for rough finished flat surface of concrete, complete all as specified and as directed.

M&L for providing 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) , as in flooring, making surface even and rough to received cement screed bed, complete all as specified and directed.

M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate), as in path/ floor etc. finished even & rough, complete all as specified and directed.

M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate), as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3:1), complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for hardcore of broken stones or boulders of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered & rammed to a true surface, complete all as specified and directed.

M&L for cement concrete in foundation filling and mass concrete type D2 (1:4:8) using 40 mm graded crushed stone aggregates, complete all as specified and directed.

M&L for cement concrete in foundation filling and mass concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregates, complete all as specified and directed.

M&L for cement concrete in surface channels and drains type C2 (1:3:6) using 40 mm graded crushed stone aggregates, complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc, complete all as specified and directed.

M&L for prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

M&L for prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F in repair stainless steel decorative curtain rod of 25 mm bore with wood finish powder coated and including six Nos curtain ring per running meter, complete all as specified and as directed.

S&F brackets and fancy type funnel caps wooden finish, suitable for the curtain rod to be provided under item No 163 above, complete all as specified and as directed.

S&F inrepair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width of aluminium (Die cast) body and of weight between 61 to 80 kg, complete all as specified and as directed.

S&F in repair mortice lock, vertical type, size 100 mm, 4 levers, brass, complete all as specified and as directed.

S&F Continuous (piano) hinges width of flaps (when open) in 30mm, mild steel, bright finish or electrogalvanised, complete all as specified and as directed.

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-16, complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregates) as in hold-fast blocks, blocks for fixing lugs, filling of pressed steel chowkhat and the like including necessary form work, complete all as specified and as directed.

S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality, white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed.

S&F in repair vitreous china wash basin, 1st quality, white, flat back, approx size 580x450mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc and brushing neat cement slury with 3kg/sqm, complete all as specified and as directed.

M&L for 20 to 25mm thick Machine cut kota stone slabs as in flooring, laid over and including 20mm thick screed in cm (1:6), set, jointed and pointed in neat cement slurry mixed with pigment to match with the shade of the slabs, including rubbing and mirror polishing etc, complete all as specified and as directed.

M&L for 20 to 25mm thick Machine cut kota stone slabs as in riser of step, skirting, dado etc. laid over and including 10mm thick backing layer in cm (1:4), set, jointed and pointed in neat cement slurry mixed with pigment to match with the shade of the slabs, including rubbing and mirror polishing etc, complete all as specified and as directed .

Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided for including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for brushing neat cement slurry with 1.00 kilogram of cement per square metre over roof surfaces etc, providing 20 mm thick plastering in cement mortar (1:3) mixed with liquid water proofing compound, finished even and smooth, complete all as specified and as directed. Note :- Supply only water proofing compound shall be measured and paid separately under the respective Item.

M&L for applying evenly bituminous tack coat @ 1.20Kg/Sqm of industrial bitumen blinded with 0.006 cum of coarse sand per Sqm and thereafter applying of Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m on the surfaces of the sunken floor , complete all as specified and as directed.

M&L for cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in sunken portion of WC etc, complete all as specified and as directed.

M&L for 40mm thick plain cement concrete (1:2:4) type, B1 (using 20 mm graded crushed stone aggregates) as in flooring, complete all as specified and as directed. , complete all as specified and as directed.

S &F stainless steel kitchen plate rack made out 0.63mm thick and overall approx size 24’’ x 36’’ x 10’’, complete all as specifiied and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

S&F in repair sink made of 1 mm thick sheet of stainless steel (Bronze range super steel 204 : Matt) for kitchen or laboratory with and including plugs, washers, 40mm bore brass chromium plated waste fittings, 40mm bore PVC waste pipe, also including bedding in cement mortar (1:3) on dwarf wall or including providing mild steel cantilever brackets and connecting union to pipe, overall size 495mm x 420mm x 178mm with bowl size 405mmx 355mm, complete all as specified and as directed.

Taking down existing un-servicable waterproofing treatment from roof slab surfaces (also including roughening of old concrete surfaces by picking), cleaning the surfaces by wire brush and also including disposing off the retrieved debris outside the premises / site, complete all as specified and as directed.

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying 3mm thick APP modified water proofing polymeric membrane reinforced with non woven polyester fibre using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm. (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption,% - Not more than 0.15. (ix) Cold flexibility - (-) 50C. (x) Dimentional stability % change = Maximum 1%. (xi) Heat Resistance - Does not dirp at 1200 C Note : The quoted rate shall also be deemed to include for cutting grooves of size and shape as required in the parapet wall for tackling the APP membrane in the wall including making good the surfaces of groove as well as damaged surfaces of the wall after tackling of membrane in CM 1:3 to match with the adjoining surfaces.

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane, complete all as specified and directed.

Removing and Hacking of existing detoriorated damaged & loose concrete from the external surface of the structure carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete or control sand blasting including cleaning the surfaces by air jet etc, complete and also without damaging the existing structure including standard steel scaffolding upto a height of 7 M and also including disposing off the retrieved debris outside the premises / site, complete all as specified and as directed. Note: The above treatment will be done in presence of company authorised person and also company skilled workers.

Removing the loose scale of corrosion etc from the exposed reinforcement and cleaning the corroded reinforcement by wire brush folled by cleaning with air blower/ water jet. Finally cleaning the rusted reinforcement / metal (iron base) by Chemical rust remover, cleaning and etching agents with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal/ steel for about 5-7 days. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth as per technical specifications and also as per manufacturers recommondations and also as per direction of Engr-in-Charge. The rate inclusive of labourers, materials, tools etc complete including standard steel scaffolding upto a height of 7 M. Note: The above treatment will be done in presence of company authorised person and also company skilled workers. Make of the Rust removing agent : Reebakelens RR from M/s Fosroc or equivalent Makes M/s SIKA, M/s Pidilite etc.

M&L for surface cleaning an application of Two coats of Two component epoxy zinc rich primer coat on steel surfaces/ reinforcement as per manufacturer's recommendation and as per technical specification and also as per direction of Engr-in-Charge, complete including standard steel scaffolding upto a height of 7 M. Make of Two component epoxy zinc rich primer : Nitozinc Primer from M/s FOSROC and Equivalent M/s SIKA, M/s Pidilite etc. Note : The above treatment will be done in presence of company authorised person and also company skilled workers.

Re-Bar Anchor: Provifing and fixing shear connectors of 10 mm dia by drilling 12 mm dia holes on the concrete surface to a depth of 100 mm using a rotary cum hammering drilling machine as per technical specification and throughly cleaning the hole using compressed air and water jet and anchoring with pure Epoxy resin based anchoring grout solution. Make of Epoxy based resin grout : Lock Fix E77 from M/s FOSROC and Equivalent M/s SIKA, M/s Pidilite etc. Note : The above treatment will be done in presence of company authorised person and also company skilled workers.

Crack Sealing : Identify the cracks and construction joints, honeycomb areas, shall be chased open into 'U' groove shape and sealed with High strength, abrasion epoxy resistance epoxy reinstatement mortar, Providing and fixing 6-8 mm dia nozzle along the joints and honeycomb areas after proper surface preparation. The injection of Conbextra EP10 or Equivalent through the nozzle till the refusal of the grouting materials complete all as specified and as directed.

M&L for applying Structural grade long pot life, Two component Epoxy resin concrete bonding agent prior to building up of section with any type of mortar/ concrete to ensure bond between old concrete and new concrete by brush application as per manufacturers insturctions and also as per technical specifications and also as directed by the Engr-in-Charge at site. Note : The above treatment will be done in presence of company authorised person and also company skilled workers. Make of Two component Epoxy resin concrete bonding agent : Nitibond EP from FOSROC or Equivalent M/s SIKA, M/s Pidilite etc.

M&L for 25mm thick (Average thickness) Guniting concrete surface using mechanical means with single component, shrinkage controlled, polymer modifed, fiber reinforced structure grage cementitious repair mortar having compressive strenght of 45 N/Sqmm, Flexural strenght of 7 N/Sqmm and tensile strength of 2.50 N/Sqmm at 28 days all as panufacturers recommendation and technical specification and as per the direction of the Engr-in-Charge including standard steel scaffolding upto of 7M. Note : The above treatment will be done in presence of company authorised person and also company skilled workers. Make of single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cmentitious repair mortar : Renderoc SP 40 from FOSROC or Equivalent M/s SIKA, M/S Pidilite etc.

M&L for laying of ready to use non shrink, cementitous free flow micro concrete upto required thickness at the designated areas to the prepared slurry tight shuttering with proper shear connectors and bonding agent where ever necessary. The fluid Micro-concrete repair material shall be single component, cement based to which only site condition of water and approved grade coarse aggregate where ever specified shall be permitted. The micro concrete shall contain no mettalic aggregates or chlorided and shall be shrinkage comensated in the plastic state. The mocro concrete in the flowable consistancy should achieve a compressive strenght of 50 N/Sqmm after 28 days at 30 degree Centigrate as per BIS 4551-80. The unrestrained expansion shall be between 1-4% as per ASTM C827 - 1987. Againg as per BS 4551-80 the flexural strength shall not be less than 5 N/Sqmm @ 28 days. The micro concrete shall beave a coefficient of thermal expansion 10-12 x 10-6/oC and thermal conductivity 1.50 W/moC. The mixed density of micro concrete shall exceed 2100-2200 Kg/Cu.M 227oC including standard steel scaffolding upto a height of 7 M. Note : The above treatment will be done in presence of company authorised person and also company skilled workers. Make of non shrink, cementititous free flow micro concrete micro concrete : renderoc RG of FOSROC or Equivalent M/s SIKA, M/s Pidilite etc.

Taking down carefully existing aluminium point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed.

Taking down existing unserviceable submain wiring (including conduit /casing -caping), any size and making good the disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.

M&L for point wiring for one light point/ one fan point/ one exhaust fan controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including factory made anodized pressed steel sunken boxes (Having wall thickness not less than 1.22 mm for boxes suitable size and beyond that the wall thickness shall be not less than 1.63 mm), concealed type with and including 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM 1:3 to match with the adjoining surfaces , complete all as specified and as directed.

All as per item No 192 here-in-before but for one light point controlled by 2-way switch , complete all as specified and as directed

All as per item No 192 here-in-before but for one socket with other switch/switch socket outlet 5 amps on the same board, complete all as specified and as directed

All as per item No 192 here-in-before but for one 3pin 5 Amp switch socket outlet, indepent board 1.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed.

All as per item No192 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed.

Supply and fixing switch piano flush type, single pole, one way, 5 amps, complete all as specified and as directed.

Supply and fixing switch piano flush type, single pole, two way, 5 amps, complete all as specified and as directed.

Supply and fixing bell push, flush type, 5 amps, complete all as specified and as directed.

S&F Switch socket combination , 2 in 1, 2/3pin, 5 Amp, complete all as specified and as directed.

S&F Switch socket combination, 2 in 1,3pin, 5 and 16 amp, complete all as specified and as directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and as directed.

Supply and fixing bell buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and as directed.

S&F Modular switch 1 way 6A, 1 module, complete all as specified and directed.

S&F switch 1 way 16A, 1 module, complete all as specified and directed.

S&F Modular socket 6A , 2/3 pin combined, 2 module, complete all as specified and directed.

S&F Modular socket 6A/16A , 2/3 pin combined, 2 module, complete all as specified and directed.

S&F Modular Fan step regulator, 120W, 2 module, complete all as specified and directed.

S&F ceiling rose, 3 phase /PVC/Polycarbonate, isolated body, complete all as specified and as directed.

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 2.0 sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 2.0sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 20 mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 4.0 sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 4.0sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 20 mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 6.0 sqmm and one single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 6.0sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25 mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

S&F sheet metal enclosure for MCBs DBs, TPN, 4 way, 415 volts, Double Door with magnetic locking system, Powder coated including necessary provision for inserting the DBs in wall by cutting the bricks/stone masonary etc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed.

S&F sheet metal enclosure for MCBs DBs, SPN, 8 way with 200Amps rated bus bar 240 volts, Double Door with magnetic locking system, Powder coated including necessary provision for inserting the DBs in wall by cutting the bricks/stone masonary etc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed.

S&F in repair sheet metal enclosure for MCBs DBs, SPN, 12 way with 200Amps rated bus bar 240 volts, Double Door with magnetic locking system, Powder coated including necessary provision for inserting the DBs in wall by cutting the bricks/stone masonary etc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed.

S&F MCB, 'C' curve, TPN/FP, 415 volts breaking capacity 10KA, 40Amps, complete all as specified and directed.

S&F MCB, 'C' curve, SPN, 240 volts breaking capacity 10KA, 32Amps, complete all as specified and directed.

S & F MCB, 'C' curve, SPN, 240 volts breaking capacity 10KA, 40Amps, complete all as specified and directed.

S & F MCB, 'C' curve, SP, 240 volts breaking capacity 10KA, 5 to 32Amps, breaking capacity 10KA, complete all as specified and directed.

S & F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S & F inverter LED bulb 12W , complete all as specified and directed.

S &F LED tube lingh fitting 1x10 watts,220V, AC PVC box type type with driver, all accessories interially pre-wired and necessay mounting arrangements, provision of new 3 core multistranded copper counductor of size 23/0.193 form ceiling rose to fiting complete all as specified as directed.

S &F LED tube lingh fitting 1x20 watts,220V, AC PVC box type type with driver, all accessories interially pre-wired and necessay mounting arrangements, provision of new 3 core multistranded copper counductor of size 23/0.193 form ceiling rose to fiting complete all as specified as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified and as directed. Note: GI earth wire 25x4mm dia and 15mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contractor.

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified and as directed. Note: GI earth wire 4mm dia and 15mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contractor.

S&F GI earth wire 4mm dia earth continuity conductor for making connection from earth test point to main DB, complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete and louvers shutter with aluminium based frame and wire mesh, (as approved by GE) voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm and provision of PVC copper conductor cable for making connection with ceiling rose, complete all as specified and as directed.

S&F Single pole and neutral enclosure with & including a two pin and earth plug and socket, also with and including one number single pole, MCB, 20 Amps, 240 volts, 10 KA ruputring capacity, complete all as directed and specified.

S & F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

S&F Building Security light luminiar fitting 1x20W, presure die-cast aluminium housing with individual LEDs as light source and Lens embedded PC cover having TOP opening, separate driver compartment with IP 66 protection and impact resistance of IK-07 and provision of copper conducor cable for connection and GI bracket medium grade 1m long bent to angular shape with clamp etc, complete all as specified and directed.

S &F surface and wall mounted LED batten 20 watt 4ft long with aluminium housing and integrated Electronic Driver with IP20,PF 0.90, total System Lumens 1050 Lumens, 6500K CRI>80, Operating Voltage range 140V-270V complete all as specified as directed.

S &F surface and wall mounted LED batten 10 watt 2ft long with aluminium housing and integrated Electronic Driver with IP20,PF 0.90, total System Lumens 1050 Lumens, 6500K CRI>80, Operating Voltage range 140V-270V complete all as specified as directed.

S &F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified as directed.

S &F AC short circuit protection motor starter with 25 Amps MCB protected power unit 230 Volt complete all as specified as directed.

S &F in repair VTPN DB, MCCB incomer, 4 ways double door, metal door, IP-43 IK 09 in 25 in 250A rated copper bus bar, earth bar, neutral link, including planking plates as required and fixed flush to wall and making good the disturbed surface complete all as specified as directed.

S &F in repair MCCB, four pole, 160Amps, 415V, 50Hz, adjustable type with braking capacity 36KA , complete all as specified as directed.

S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to esiting brick wall for fan base complete all as specified and directed. Note: Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted.

Fixing only serviceable LED light fitting/bulb etc as obtained from item no 136 after necessary cleaning, dusting and electric connection, complete all as specified and as directed.

S &F in repair LED street light 25 watt made up of pressure die cast aluminium housing with highly efficient LEDs and PC cover with integrated lens with IP66, IK07, system lumen Efficasy >100 Lm/W, 5kv surge voltage protection, operating voltage range 140V-270V, complete all as specified as directed.

S & F for energy Exhaust fan of 250 mm sweep made of metal body Ventil Air-DS type complete with louver with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to esiting brick wall for fan base complete all as specified and directed. Note: Cost of suitable opening wall for fixing exhaut fan is deemed to be included in overall rate quoted

S&F 15mm bore light grade, galvanized steel tubing for protection of GI wire, complete all as specified and as directed.

MS ORIENT ENGINEERING WORKS (BID ID -3300564)

M/S B D ENTERPRISE (BID ID -3300861)

M/S JANATA CONSTRUCTION (BID ID -3298368)

Shree Ram Construction (BID ID -3298866)

M/S CONTRACTS (BID ID -3298505)

M/S TARAN INFRACON (BID ID -3300755)