E Tender No 21/EDC(K)/2021-22

Amount

Supply Item

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6 mm.MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth for line to Line taping size 120/95 Sq mm-120/95 Sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth for line to DB Taping size 120/95 Sq mm-25/16 Sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of M.S. Half Clamp for PCC Pole made of M.S. Flate Size 35x5 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Fixing of LT Distribution box. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Dead End Clamp. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Suspension Clamp. (As Per Specification & Drawing of UPCL)

Supply of Stay Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 16 mm for connecting PVC cable 4x16 sq mm. (As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 70 sq mm to 70 sq mm (For Line to Line). (As Per Specification & Drawing of UPCL)

Supply of L.T. Bare Neutral Connectors PG Clamp 70 sq mm to 16 sq mm (For Line to DB). (As Per Specification & Drawing of UPCL)

Aerial Bunch Cable Laying Work

Cartage of PCC Pole by private truck from store centre Rudrapur /Haldwani/ Kashipur to work site dump store approx. distance 10 to 80 Km. including loading into truck and unloading at work site. Dump store and carriage from dump store to pit site.

Cartage of Small Line Material by private truck from store centre Rudrapur /Haldwani/ Kashipur to work site dump store approx. distance 10 to 80 Km. including loading into truck and unloading at work site. Dump store and carriage from dump store to pit site.

Erection of Single PCC Pole Structure after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Fixing of Grouting of stay set complete as per RESPO drawing no. RES-16 with stay rod 16×1800 mm stay wire 7/10 SWG including excavation of earth and grouting of stay in pit with CC 1:4:8 in bottom of pit in size 0.60×0.60×0.60 mtrs, including cost of cement, sand and stone ballast etc. fixing of all accessories complete in all respect as per Specification of UPCL.

Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 2.5 m deep below ground level connected to support with earth wire 7/16 swg fixing of all accessories complete in all respect as per Specification of UPCL.

Laying,Stringing and sagging of LT A.B Cable size (3x95+1x70 Sq mm) including Fixing of Insulated Piercing Connector,Dead end Clamps With I Hook, Suspention Clamp,Holding Clamps, etc. complete in all respect as per Specification of UPCL.

Laying and Fixing Insulated Cable 4x16 sq mm insulated lead.(Cable provided by UPCL)

Fixing of L.T. Distribution Box & Connection of respective Consumer in all respect.

Fixing of Dead End Clamp

Fixing of Suspension Clamp

Fixing of M.S. Stay Clamp.

Fixing of Shear Head type Insulated Piercing Connector size 120/95 Sq mm.

Fixing of Shear Head type Insulated Piercing Connector size 70 to 70 Sq mm.

ASHOK KUMAR AND CO

HIMALAYA BUILDCON