PROVISION OF CHAIN LINK FENCING AND ALLIED WORKS FOR ELECTRIC SUPPLY SUB STATION AT VARIOUS LOCATIONS IN SECTOR A AND B UNDER GE UTILITY AMBALA CANTT

Amount

Excavating in post holes each n.exc 0.5 cum getting out, in soft/loose soil complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in post holes complete all as specified and directed.

S&F Mild steel for posts and struts in fencing port including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt exc 5cm and n exc 10 cm long and diameter of neck 10mm complete all as specified and directed.

Supply only Chain link Fencing MS galvanised fencing, any size or type complete all as specified and directed. Note : Weight of chain link fencing shall be measured at site in the presence of Engineer-in-Charge and necessary endorsement shall be made in MB.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply and fixing of galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (Each line wire to be measured separately)

S & F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L two coats of senthetic enemel paint on new steel Surfaces not exc 10cm width or girth over a coat of red oxide primer when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L two coats of senthetic enemel paints on steel Surfaces exc 10cm girth over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc and n exc 1.5m in depth and getting out complete in soft loose soil.complete all as specified and directed.

M&L for cement concrete Type D2 1:4:8 using 40mm graded stone aggregate as in foundations, filling and mass concrete. complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in coping etc incl necessary form work. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing the surface fair and even complete all as specified as directed.

M&L for preparation and applying three coats of white wash on new plastered surface of wall complete all as specified and directed.

M&L hardcore of bocken stone/ brick boulder Hand packing/ filling in transformer platform (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level all as specified as directed.

M&L 100 mm thick PCC 1:2:4 type B1(20mm aggraded aggregate ) finishing cement concrete surface even and smooth with using extra cement all as specified as directed.

Material and labour for hardcore broken stone or boulders filling of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface incl lime (chuna) layer minimum 10mm thick before spread hardcore complete all as specified and as directed.

Supply and Fixing of Test point terminal block of gun metal or phosporus bronze size 75x75x25mm drilled and screwed incl 3 Nos 8 mm dia 25 mm long hexogonal head screw complete all as specified and directed.

Supply and Fixing of galvanised iron strip 32 x 6mm buried in ground with heavy duty saddles, screws and made of test point etc. for down conductors above ground complete all as specified and directed.

Supply and fixing, laying, connecting and testing in XPLE armoured cable underground insulated and overall sheathed with aluminium conductor of size 120 Sqmm 3.5 core heavy duty 1100 volts grade laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. Note : (i) Earth work, sand cushioning, brick protection shall be measured and paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

Supplying and fixing of light grade galvanised mild steel pipe 80mm bore with all fittings, laid under roads, drain, paths, fixed to poles/walls with suitable mild steel clamps , bolts , nuts and washers all as specified and directed. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule

Material and labour for broken earth pit with PVC cover of size 300x300x300 mm made of PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, and earth pit cover made out of RCC 1:2:4 type B1, cover reinforced with 8 mm dia TMT bars @ 100 mm centre to centre both ways with handle made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and including reconnecting of earth lead of any type with new nuts, bolts and washers as required at site with testing result all as specified and directed.

Supply and fixing for outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5x 120 Sqmm complete all as directed by Engr-in charge.

Material and labour for shifting heavy items / excavation / cleaning areas / cleaning site by providing crane/hydra/excavators/tractors/trolley etc as required at site complete, all as specified and as directed.

Disconnecting & taking out existing underground XLPE HT/LT cable any size from trenches, pole, pipe, floor, wall etc and relaying the same in other route including connecting and testing for any size cable complete as directed by Engineer-in-Charge (Excavation/earth work & sand cushioning, bricks and joint shall be measured & paid for separately).

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed. Note:- Punned thickness 18cm shall be measured for payment purposes.

Supply and lay bricks, common burnt clay, sub class "B', old size, laid in vertical direction to cable as cable protection complete all as specified and as directed.

Material and labour for vibratery compactive, precast cement concrete rubber moulded, coloured ( except grey colour), interlocking designer paver blocks in Milano shape, comfirming to IS-15658-2006 of 60 mm thickness, M-35 grade, as in path, harding standing, etc laid over and including 25 mm compacted sand cushioning, including surface excavation over area n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil and removing excavated soil exc. 50 mtr but n. exc. 250 mtr complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thick PCC 1:4:8, type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 30 cm in soft/loose soil.

Removing excavated material nexc 50m and depositing where directed at a level n exc 1.5m above the starting point.

Note:- Amount of credit of Rs 0.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.

Gupta Enterprises

M/S M S BUILDER AND CONTRACTORS

M/s Guddu Builders

R. P. Suppliers and Construction Co.

M/s badrinath Traders

S M BUILDERS