Supply, Erection, fitting and fixing of 6 Mtr Octagonal Poles with 60 watt LED Street Lights at N.K.Chatterjee Street, Anandapuri, Basanta Bihar And New Panchanantala Road for ward no 22 within Kamarhati Municipality Area.(60 Nos.)

Supply of 6 Mtr. GI Octagonal Pole as per dimension : Top dia 70 mm bottom dia 130 mm section 1 (length 6 mtr.) thick 3 mm base plate 220 x 220 x 16 (PCD 220 mm, foundation accessories M20 x 700mm x 4 nos GI Nut & Bolt (make : Bajaj/Surya/B.Pproject/utkarsh/calcutta pole/transrail) Ref: MED Vetted rate (Estimate attached)

Civil Foundation and Erection of above pole on CC foundation M20 grade as per drawing and specification as stated below. Earth work footing 1 cubic meter fittings of foundation 0.075 cubic meter single brick flat soiling 1 sqm. Plain cement concrete (1:2:4) for footing 0.1 cubic mtr. ordinary concrete 1:1:5:3 for column base 0.2 cubic mtr. column upto GL 0.07 cubic mtr. and column above GL 0.037 cubic mtr. Ref: MED Vetted rate (Estimate attached)

S/F projoected lamp bracket made 50mm dia.G.I. pipe of 1.85M(6') in length of which 0.9M(3') in projection having anngle of 105 dgree with clamps, bolts,nuts & clamps etc.as required. Ref: UDMA(E/M) (Vol 1) Schedule 2018, Item-19,page-5,

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 20cmx15cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole Ref: PWD(Electrical) Schedule 2017, H-1, (A)3(a)(ii)

Supplying and delivery of 60 watt LED street light, with pressure die cast aluminum housing. IP66 protection,road way luminarie with high power LED as per the detail technical proposal specification duly approved vide memo no. 1528(3)-UDMA-13013(99)/3/2020-ESTT-TCP SEC-Dept. of UDMA dated,08/12/2020

Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment:HPMV/HPSV luminaries/LED fittings of any wattage.Ref: UDMA(E/M) (Vol 1) Sch. 2018, page-35,item-7)

Supply and Drawing 1.1KV single core stranded 'FR"PVC insulated & unsheated single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making ecy.connection as required (b) 3x22/0.3(1.5 sqmm) Ref.PWD-17,E-9, C.1(b)

S&F medium gauge GI pipe( ISI-Medium) protection with necessary fittings and jointing materials as required. 40 mm dia Gi pipe.(PWD-17, F-6, sl no. 11 /c)

Supply of 1.1 KV grade PVC insulated Aluminum conductor armoured Cable 4 core 6 Sq.mm, Make: (Gloster / Havells /R.R. Kabel / Polycab /KEI) Ref: UDMA(E/M) (Vol 1) Sch. 2018, page-11,1 (b/3)

Laying of one cable upto 50 Sq.mm through existing RCC / Hume / GI pipe open masonry trench for single 2,2,3.5& 4 core. (PWD-17, F-1/3a)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC Armoured cables as below. For 4 core 6 Sq.mm (PWD-17, F-4, Item no. 7/c).

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint a) 1st coat of aluminium paint over one coat of RO priming

b) 2nd coat of aluminium paint over 1st coat (PWD-17, H-2, Item no. 7B, a & b)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials : For 4 core 6 Sq.mm (PWD-17, F-5, Item no. 8,b/x)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled withbitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe (PWD-17,G-1.Item No.2/a)

Add GST @ 18%

Add LWC @ 1%

Please Enable Macros to View BoQ information