Providing Conference Hall Interiors and Other Misc. items, sound system and other works at Dahod

No. figures Amount

1 Pro. And fixing single layer water proof gypsum board 12.5 mm thick 128.98 Sqm. 606.95

sections using water proof board of size 1220 mm x 1830 mm x

mm suspended by Gl suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm

x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat joining compound top coat on

ceiling incl.making necy.opening for light fitting, diffuser etc. comp. as

per detail drawing as directed

2 Providing and fixing acoustical wall paneling with 12 mm thick 134.45 Sqm. 5201.50

decorative slotted magnesium oxide board fixed over G.I. steel

framework, including G.I. studs of 48 mm depth made of 0.50 mm

thick galvanized steel sections having flanges of required width,

placed at 600 mm centre to centre or as required, fixed within 50 mm

G.I. floor and ceiling channels made of 0.55 mm thick galvanized

steel, complete in straight or curved profile as specified. The work

shall include providing and fixing 50 mm thick glass wool insulation of

minimum density 24 kg/m³, pre-laminated on both sides with

acoustical tissue, placed behind the slotted boards and held in position

with approved clips or support arrangement. The item shall also

include finishing the surface with one coat of wall putty, one coat of

primer and two coats of approved plastic emulsion paint, wherever

required, complete with all materials, labour, framework, insulation,

fasteners, screws, accessories, scaffolding, tools and plants, packing,

forwarding, loading, unloading, installation, all taxes and duties, and all

incidental works, complete as per specifications, drawings and

directions of the Engineer-in-Charge. Measurement shall be in square

metre of finished surface

3 Providing and fixing Wooden Conference Table 600mm width top with 22.26 Sqm. 26765.00

using 18mm thick All proof IS plywood in frame structure, legs and

modesty panel with 4.0mm thick teak venner cladded on all exposed

parts of the plywood with 6.0mm thick White Corian sheet on top with

fixing in line and level fixed with Silicon adhesive material with buffing

the corain sheet to be smooth and free from scratches with continuos

and jointless surface of the top with necessary hardware materials,

screws, nails, adhesives and other fixtures and fastening inclusive of

melamine polishing work to all veneer surface etc. complete as per

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

4 Providing and fixing of Revolving HIGH BACK EXECUTIVE CHAIRS 3.00 Nos 25250.00

of aluminium dia cast base and armrest,50 density high mouldfoam in

seat and back,or mesh, pu upholstry, multi funtionalmechenism, bifma

class IV gas lift and p.a castors, Executive REVOLVING chairs as per

the specified company of HOF, Feather light, Wipro, Godrej, BMA

instruction of architect or Engineer-in charge

5 Providing and fixing of Revolving MEDIUM BACK EXECUTIVE 40.00 Nos 11615.00

CHAIRS of aluminium dia cast base and armrest, 50 density high

mouldfoam in seat and back,or mesh, pu upholstry, multi

funtionalmechenism, bifma class IV gas lift and p.a castors, Executive

REVOLVING chairs as per the specified company of HOF, Feather

satisfactorily as per instruction of architect or Engineer-in charge

6 Wall painting (three coats) with luxury plastic emulsion paint of 263.42 Sqm. 454.50

approved brand and manufacture approved by Engineer-in-charge

over Two coats of lapi-putty and priming coat of approved brand

primer on undecorated wall surface to give an even shade including

thoroughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth

7 Providing and fixing roman blind curtain with standard ake and 26.05 Sqm. 4545.00

premium quality fabric with black out astar fusing. Blinds install with

standard powdercoated clamp. Blinds with stanadard working chain

mechanisum.Blind with velcrow fitting track. Curtain with stanard

aluminium powder coated channel with premium quality mechanisum.

complete as per drawing given by architect & direction given by

Engineer In charge

8 Providing and fixing factory made UPVC walnut colour sliding and fix 26.05 Sqm. 12625.00

glazed window of all height dimension comprising of uPVC multi-

chambered frame with in-built roller track and sash extruded profiles

duly reinforced with 1.6 plus/minus 0.2 mm thick galvanized mild steel

section made from roll forming process of required length (shape &

size according to UPVC profile), appropriate dimension of UPVC

extruded glazing beads and UPVC extruded interlocks, EPDM gasket,

wool pile, zinc alloy (white powder coated) touch locks with hook, zinc

alloy body with single nylon rollers (weight bearing capacity to be

kg), G.I fasteners 100 * 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of frame & sash shall be

mitred cut and fusion welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the

gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealant over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of

Engineer-in-Charge. Two track two panels sliding window made of

mm thick toughen glass and Series 2000 frame 65 * 58 mm & sash

* 90 mm both having wall thickness of 1.9 plus/minus 0.2 mm and

single glazing bead of appropriate dimension. Approved make Finesta

or Equivivalant

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

9 Providing and fixing 38mm thick Premium veneer finish flush door with 6.30 Sqm. 14645.00

stanadard locking system, Doors required with Antiue finish heavy

quality premklum lock set, Doors required with heavy quality four nos

of hinges, Doors four side covers with heavy qulity thick wooden

battens with standard grooving on all borders, Doors both side covcers

with premium grade Veneer sheet with required necessery grooves,

Doors all wooden part and veneer surfaces finisch with PU matt finish

premium quality polish with required all necessery polish materials, All

work includes required all necessery hardware and labour. Work

includes cost of sile installation complete as direceted by architect and

concern engineer in charge

10 WALL PANELING WITH VINEER & WALL PAPER 30.00 Sqm. 9090.00

Providing & fixing Wooden wall panelling using 12 mm thick plywood

fixed on panels made from 50 x 25 mm teak wood battens. The

plywood is covered with decorative Wall paper @ Rs.150/sq ft &

decorative Veneer @ Rs 200/sqft. all veneered surfaces finished with

melamine polish remaining all details as directed by consultant

11 Providing and fixing SPC carpet flooring with 2.00 mm thick Plank 128.98 Sqm. 3535.00

(0.125 x 1.20 m) and solution adhesive for fixing the carpet with other

necessary fixing materials with all materials and labour etc. complete

12 Providing and Arranging fix chair having structure of CRCA M.S. pipe 72.00 Nos 8585.00

20mm dia and 16 guage with 50 micron powder coated of approved

seat and back 40 density PU foam covered with fabric of approved

shade and texture with one year replacement warranty. Metal armrest

to be provided as per approved design. Complete chair should be in

suitable shape including all materials and labours etc. complete as per

drawing and instruction of engineer-in charge. Visitor Chair

13 Replace old and u/s by SITC of Flush Mount Chairman Unit with mute 1.00 Nos 35063.16

button which mute integrated Mic and override button which prioritizes

itself over all other delegate Units. The unit comes with a screw type

detechable microphone port to connect Shotgun mic. Integrated

Microphone with variable length of 10inch and 15inch . The

microphone features a cardioid condenser polar pattern and a

frequency response range of 50Hz to 20kHz. With a sensitivity of -

20dBV (+/-3dB) at 1kHz, it efficiently converts sound pressure into

electrical signals. It can handle a maximum input sound pressure level

of 110dB with low distortion (<0.1% THD). The microphone operates

on a 24V DC power supply (supplied by the controller) with a power

consumption of 0.72W. It connects via an RJ45 network input and

boasts a recessed enclosure design for discreet integration.

Constructed with a high-quality copper zinc alloy die-cast body, it

offers durability. Its detachable screw-type gooseneck microphone

enhances flexibility in positioning. Additionally, it features a backlit

speak & override button for improved usability, especially in low-light

environments. (Make :Bosch/ Telvic/ Earthpot/ Soltec/ Brahler/ DPA)

(With 3 Years Warrenty)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

14 Replace old and u/s by SITC of Flush Mount Delegate Unit with mute 24.00 Nos 35063.16

button which mute integrated Mic. The unit comes with a screw type

detechable microphone port to connect Shotgun mic .Integrated

Microphone with variable length of 10inch and 15inch. The

microphone features a cardioid condenser polar pattern and a

frequency response range of 50Hz to 20kHz. With a sensitivity of -

20dBV (+/-3dB) at 1kHz, it efficiently converts sound pressure into

electrical signals. It can handle a maximum input sound pressure level

of 110dB with low distortion (<0.1% THD). The microphone operates

on a 24V DC power supply (supplied by the controller) with a power

consumption of 0.72W. It connects via an RJ45 network input and

boasts a recessed enclosure design for discreet integration.

Constructed with a high-quality copper zinc alloy die-cast body, it

offers durability. Its detachable screw-type gooseneck microphone

enhances flexibility in positioning. Additionally, it features a backlit

speak & mute button for improved usability, especially in low-light

environments. (Make :Bosch/ Telvic/ Earthpot/ Soltec/ Brahler/ DPA)

(With 3 Years Warrenty)

15 SITC of Conference Controller System, Should have Digital in nature 1.00 Nos. 172460.53

with Dante Audio output and with 4 or more Kinds of Conference

Modes Including FIFO Mode, Request Mode, Automatic Mode, Voice

speakers and Active 2/3/4 Mics simultaneously, Should support

Number of microphones supported via additonal power supply unit,

supports camera Tracking thru RS-232 & RS- 422 Communication

Protocols or more, Should have supports 4 or more Video inputs and

output port on SDI and HD-SDI video format or better, Should able to

connect and control up to 4 cameras simultaneously with in built auto

switching between cameras as per microphones connected to them.

The Controller should Compatible with any PTZ camera having Visca,

Pelco D, and Pelco P Control mode protocols. It should have Dante

digital output along with Analog XLR and Phono output complete with

standard accessories required (Make :Bosch/ Telvic/ Earthpot/ Soltec/

Brahler/ DPA) (With 3 Years Warrenty)

16 SITC of Extension Box for Conferencing System - It increases the no 2.00 Nos. 34439.89

of microphone used. It should provide power for 30 microphone units.

It should have two network cable connectors for dedicated network

cable, Output voltage - 24V, Maximum output power 72W, Input/output

terminal RJ45 Network port (Make :Bosch/ Telvic/ Earthpot/ Soltec/

Brahler/ DPA) (With 3 Years Warrenty)

17 Replace old and u/s by SITC of Passive loudspeaker 40 W @ 8 8.00 Nos 19998.00

Ohm, 16/8/4/2 W @ L100V. 5.25'' Woofer + 0.5'' Tweeter. Sold in

pairs. ... 2-way loudspeaker made of ABS plastic and white (Make:-

Yamaha/ JBL/ WorkPro) (With 3 Years Warrenty)

18 Replace old and u/s by SITC of Amplifier: 4 x 150W@ 4Ohms, 1.00 Nos 71104.00

Bridge Mode, Noise Level (SNR) : 95 dB (Make:-Yamaha/ JBL/

WorkPro) (With 3 Years Warrenty)

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

19 SITC of 4CH I/O DSP Audio Processor with Acoustic Echo Digital 1.00 Nos 104989.50

Signal Processor with min. 04AEC enabled Mic/Line inputs, 04 Line

outputs or better , Input channel processing should include Pre

amplifier, Signal generator, Expander, Compressor, 10 band

Parametric EQ or better, Output Channel processing should include

band Graphic equilizer, Delay, Crossover, limiter or better, Other

features should include Automatic mixing console, Ducker, Feedback

elimination, Noise elimination, echo elimination or better, Should have

built-in Bi directional USB for Software based VC as well as for playing

digital audio, Should have built in Camera tracking Module, 4 Port

Freely Configurable GPIO or better with Analog/Digital dynamic range

of 114dB or better, Sampling rate of 48Khz or better, Frequency

response of 20Hz – 20Khz or better, per channel phantom power

module or better. Should be configurable thru software. (Make :Bosch/

Telvic/ Earthpot/ Soltec/ Brahler/ DPA) (With 3 Years Warrenty)

20 Providing and erecting cordless microphone with UHF Diversity 1.00 Nos. 6163.02

handheld wireless microphone/caller wireless complete with receiver

and transmitter unit,Cardiod ,polar pattern, dynamic microphone, LCD

display for battery and frequency status and information, 32 preset

channels, with compatible groups of 8 channels,14 hrs. battery life,

frequency response 80Hz to 18KHz., RF sensitivity <1.0 Uv,image

rejection > 55 dB,dynamic range >95 dB and receiver having

channels, S/N ratio>100 dBA, Dynamic range>95 dB,distortion<1%

[Approved by Competent Authority i.e. not Below the rank of Executive

Engineer ]

21 Replace old and u/s by Supplying and erecting Flexible PVC insulated 143.00 Mtrs. 39.39

multi strand multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(d) 1.50 Sq.mm 2 core round

PVC sheathed

22 SITC of CAT6 UTP 23AWG Solid: Per Meter [Approved by Competent 250.00 Mtrs. 43.43

Authority i.e. not Below the rank of Executive Engineer ]

23 Popup Box or cable cubbby with Hdmi, VGA, Power [Make : S. Sys / 2.00 Nos. 19886.90

Wyrestorm / Extron]

24 Supplying and laying UPVC cable trunking system comprising 50.00 Mtrs. 428.24

unplasticised polyvinyl chloride rigid material with ignition free and

flame proof confirming BS with necessary end caps internal and

external bend, flat bends, coupler, tee etc.. ALL necessary accessories

and meansuring of following sizes (2) 100 mm* 50 mm trunking

25 24 U Rack with A full range of accessories can be loaded with a full 1.00 Nos. 35552.00

security system to prevent unauthorised access to vital equipments

within the cabinet, Functional cable management all along the height,

Direct mounting of fan on the top cover allows maximum height

utilization, Canopy fitted on the top cover prevents ingress of dirt, dust

and water inside the cabinet. [Make : Valrack / ACE / Alpine]

26 SITC of Jack Cat 6 Keystone UTP [Approved by Competent Authority 28.00 Nos. 161.60

i.e. not Below the rank of Executive Engineer]

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

27 Supply, Installation, Testing and Comissioning of USB PTZ Full HD 1.00 Nos. 52036.21

1080p@30fps Video Conferencing Camera, 1/2.8" CMOS 2.16 MP

sensor, 62 degree FOV, 10X Optical Zoom with Enhanced PTZ, PAN

± 90 degree, Tilt (+) 90 degree and (-) 30 degree, H.264/MPEG Video

compression, Auto/Manual Focus, USB 2.0 Interface Plug & Play, BIS,

CE,FCC, RoHS certified [Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

28 Supply, Installation Testing & Commissioning 5 Mtr. HDMI Interface 2.00 Nos. 828.20

Cable as per the detailed Specifications supports transmission of 4K

Signals as per the detailed Specifications (High-Speed HDMI Cable

with Ethernet, supporting resolutions up to 4K @ 60Hz, HDR (High

Dynamic Range), with a bandwidth of 18 Gbps. Connectors are HDMI

Type-A (Male) to HDMI Type-A (Male), gold-plated for enhanced

signal transfer and corrosion resistance. Features include ARC (Audio

Return Channel), 3D, Deep Color, and HDCP 2.2 support. The cable

is triple-shielded for minimum interference and maximum signal

integrity, with a durable PVC jacket and strain relief for flexibility and

long life. It is compatible with all HDMI standards 2.0 and certified to

meet HDMI standards for safe and reliable performance.) [Make :-

Crestron/ Extron/ DVDO/ Kramer]

29 Supply, Installation Testing & Commissioning 10 Mtr. HDMI Interface 3.00 Nos. 1323.10

Cable as per the detailed Specifications supports transmission of 4K

Signals as per the detailed Specifications. [High-Speed HDMI Cable

with Ethernet, supporting resolutions up to 4K @ 60Hz, HDR (High

Dynamic Range), with a bandwidth of 18 Gbps. Connectors are HDMI

Type-A (Male) to HDMI Type-A (Male), gold-plated for enhanced

signal transfer and corrosion resistance. Features include ARC (Audio

Return Channel), 3D, Deep Color, and HDCP 2.2 support. The cable

is triple-shielded for minimum interference and maximum signal

integrity, with a durable PVC jacket and strain relief for flexibility and

long life. It is compatible with all HDMI standards (1.4, 2.0, etc.) and

certified to meet HDMI standards for safe and reliable performance.]

[Make :- Crestron/ Extron/ DVDO/ Kramer]

30 Providing and Erecting Full HD LED TV model No KD-55X75L make 1.00 Nos. 56062.53

sony or equivalnet make having features like Display type LED Screen

139 cm (55 inch, measured Diagonally), Display resolution

3840x2160, Backlight type Direct LED, Clarity Enhancement 4K

xreality Pro, Audio Power output 10W + 10W with motionflow

TMxR200 (Native50Hz) with Wifi Connectivity features,power

Consumption, AC 100, 240V, 50/ 60Hz other specification as per RA.

31 Supplying and erecting approved make Single phase power 1.00 Nos. 3232.00

conditioners suitable for input voltage 180V / 280V, output voltage

220V (+ / - 10%) AC 50 ‘Hz with electronic relays & component of

housed in sheet metal cabinet ‘with epoxy powder coated, with high -

socket with range off, (D) 4 KVA

TOTAL Rs.

i.e. Rs. Fifty Six Lakh Forteen Thousand Six Hundred Sixty Four and Eighty Two Paisa only.

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the mix design for different grades of cement concrete at his own cost

before execution as directed and to be approved from the Engineer in charge.

6. Dismantalled materials of amount of Rs. 0.00 must be recovered from 1st R.A. bill of Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Dahod (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Dahod Dahod Dahod