Construction of new Falla Sdn office building and Compound wall at Falla under Jamnagar Circle.

NAME OF WORK : Construction of new Falla Sdn office building and Compound wall at Falla

under Jamnagar Circle.

ITEM QTY PER RATE AMOUNT

1 Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50M. Lead. (B)

Loose or soft soil. 50.00 Cu.M. 124.61

2 Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50M. Lead. (B)

Dense or hard soil. 90.00 Cu.M. 159.48

3 Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50M. Lead. (D)

Soft rock not requiring blasting. 90.00 Cu.M. 281.87

4 Excavation for foundation up to 1.5M depth including

sorting out and stacking of useful materials and

disposing of the excavated stuff upto 50M. Lead. (D)

Hard rock 110.00 Cu.M. 636.06

5 Excavation for foundation up to 1.5M to 3.0M. depth

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50M. Lead.

(D)Soft rock not requiring blasting. 65.00 Cu.M. 305.98

6 Excavation for foundation up to 1.5M to 3.0M. depth

including sorting out and stacking of useful materials

and disposing of the excavated stuff upto 50M. Lead.

(D)Hard rock 45.00 Cu.M. 660.16

7 Providing and laying cement concrete 1:2:4 (1- Cement

: 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth 63.00 Cu.M. 3765.41

8 Providing and laying cement concrete 1:3:6 ( 1-Cement

: 3-Coarse sand : 6-Hand broken stone aggregate

40MM nominal size ) and curing complete excluding

cost of formwork in (A) Foundation and plinth.

9 Filling available excavated earth ( excluding rock ) in

trenches, plinth, sides of foundation etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering. 352.00 Cu.M. 136.11

10 Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete 1620.00 Cu.M. 301.58

11 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(C) Fly Ash Bricks 137.00 Cu.M. 4408.17

12 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure in Cement Mortar 1:6 (1- Cement : 6 -

fine sand)(C) Fly Ash Bricks - GF 113.00 Cu.M. 4693.74

ITEM QTY PER RATE AMOUNT

13 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. at

first floor in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(C) Fly Ash Bricks - FF 61.00 Cu.M. 4737.8

14 Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in Super structure (C)Fly Ash Bricks 106.00 Sq.M. 709.88

15 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in [A] Foundation, footings, Base of

columns and Mass concrete. 42.00 Cu.M. 5444.17

16 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

and excluding reinforcement for R.C.C work in [D]

Columns - GF 30.00 Cu.M. 8892.28

17 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

and excluding reinforcement for R.C.C work in [D]

Columns - FF 7.00 Cu.M. 8933.44

18 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

and excluding reinforcement for R.C.C work in [C]

Beams GF 81.00 Cu.M. 6918.65

19 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

and excluding reinforcement for R.C.C work in [C]

Beams.at first floor 7.00 Cu.M. 6959.81

20 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Copings upto floor two level.

21 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Chajjas. 2.00 Cu.M. 7335.17

22 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in Staircase. 3.00 Cu.M. 7363.66

23 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in SLAB - GF. 37.00 Cu.M. 7302.89

24 Providing and laying controlled cement concrete M-250

and curing complete including the cost of form work

but excluding the cost of reinforcement for reinforced

concrete work in SLAB. At first floor 15.00 Cu.M. 7344.05

25 Providing Thermo Mechanically treated bar F.E.

Steel reinforcement as per I.S. Standard for R.C.C work

including bending, binding and placing in position

complete upto floor two level. - GF 22100.00 Kg 76.52

ITEM QTY PER RATE AMOUNT

26 Providing Thermo Mechanically treated bar F.E.

Steel reinforcement as per I.S. Standard for R.C.C work

including bending, binding and placing in position

complete upto floor two level.at first floor 2900.00 Kg 77.58

27 Providing 15MM thick cement plaster in single coat on

Brick/concrete walls for interior plastering upto floor

two level finished even and smooth in Cement Mortar

1:3 ( 1-Cement :3-Sand ) for walls. - Gf 914.00 Sq.M. 182.86

28 Providing 15MM thick cement plaster in single coat on

Brick/concrete walls for interior plastering upto floor

two level finished even and smooth in Cement Mortar

1:3 ( 1-Cement :3-Sand ) for walls.at first floor 196.00 Sq.M. 207.08

29 Providing 10MM thick cement plaster in single coat on

Brick/concrete walls for interior plastering upto floor

two level finished even and smooth in Cement Mortar

1:3 ( 1-Cement :3-Sand ) for ceilling - GF 223.00 Sq.M. 163.56

30 Providing 10MM thick cement plaster in single coat on

Brick/concrete walls for interior plastering upto floor

two level finished even and smooth in Cement Mortar

1:3 ( 1-Cement :3-Sand ) for ceilling - FF 74.00 Sq.M. 185.75

31 20MM thick sand faced cement plaster on walls upto

height 10meters above ground level consisting of

12MM thick backing coat of Cement Mortar 1:3 ( 1-

Cement : 3-Sand ) and 8MM thick finishing coat of

Cement Mortar 1:1 ( 1-Cement : 1-Sand ) etc. complete.

32 Providing cement vata ( 10Cm x10Cm ) size quarter

round in cement concrete in C.M. 1:1 including neat

cement finishing, watering etc. complete. 105.00 Mtr. 24.04

33 Providing and laying 24"x24" Vitrified 8mm thick

double charge tiles in flooring and skirting over 20mm

(average) base of cement mortar 1:6 ( 1-Cement : 6-

Coarse sand ) on new surface or fixing on existing

flooring by adhesive material including 5mm groove

filled with epoxy including finished with flush pointing

and cleaning the surface etc complete, for Light Shade

as directed by EIC. 294.00 Sq.M. 1656.72

34 Providing and laying coloured glazed tiles of the size

larger size in floring, skirting, risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-Cement : 3-Coarse

sand) & jointed with white cement slurry. 128.00 Sq.M. 1508.58

35 Providing and laying 25MM thick Kotah stone slab

flooring over 20MM (average) thick base of Cement

Mortar 1:6 ( 1-Cement : 6-Coarse sand ) or lime mortar

1:1.5 laid over and jointed with grey cement slurry

including rubbing etc complete. [A] 25MM thick as

directed by EIC. 25.00 Sq.M. 1009.30

36 Providing and laying 20 to 25MM thick, both faces

mirror polished Kotah stone with all edges machine cut,

450mm or 600mm width and of required length (only

one piece to be used) of approved quality for cup board

shelves, wall partition etc. including fixing the same in

masonary wall by cement mortar in three sides

including curing etc. complete as directed by EIC.

ITEM QTY PER RATE AMOUNT

37 Providing and laying 25 mm thick granite slab (18mm

thick) flooring over 20 mm. (average thick base of

cement mortar 1:6 (1 cement : 6 coarse sand ) of L.M.

1:1.5 or laying in sill jamb jointed with grey cement

slurry or bonding chemical including rubbing and

polishing complete. 113.00 Sq.M. 2981.00

38 Providing and laying broken China Mosaic Flooring for

terrace using 12mm to 20mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar crème out upto

surface using white cement including rounding off

junctions and extending them up to 15cm along the

wall, clearing with water and oxalic acid etc. as directed

39 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth including

two coats of putty and primer etc complete. 1110.00 Sq.M. 125.71

40 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated

Celling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

smooth including two coats of putty and primer etc.

complete. 297.00 Sq.M. 131.31

41 Providing and applying 1 coat of approved make of

cement primer paint including scaffolding watering etc.

complete as directed by EIC. 1370.00 Sq.M. 28.00

42 Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thorughly brushing the surface

to remove all dirt and remains of loose powdered

materials etc. complete 1370.00 Sq.M. 120.93

43 Providing and fixing MS grills or required pattern to

frames of windows etc. with MS flats at required

spacing and frame all round square or round bars with

round headed bolts and nuts or by screws/welding with

three coats of oil paint including a priming coat etc

complete as directed by EIC. [A] Plain grill. 690.00 Kg 116.22

44 Providing and fixing 50MM Stainless steel pipe hand

railing for staircase with necessary Balusters, Vertical

pipes of required diameter fixing the same by airldite

necessary welding etc as directed by EIC. 13.00 Rmt 2980.00

ITEM QTY PER RATE AMOUNT

45 Providing, & fixing hot pressed phenol bonded, exterior

type solid flush door 35mm shutter made by approved

brand & as per I.S.I. standard with water resisting

plywood facing and 1mm thick laminated sheet on both

side of door. If necessary with glass looking window

with T.W. batten and polishing /Colour .Rates are

without fixtures & fastening but with 3 NO. of 100mm.

long butt or parliamentary hinges on each flap of

double shutter & 150mm. long hinges for single shutter

and 3 NO. of M.S. flat hold fast grouted in C.C. (1:2:4)

on each side of frame, 3 coats of oil painting of

approved shades make etc., complete as per drawing &

as directed by E.I.C. 20.00 Sq.M. 3675.00

46 Providing and fixing Solid PVC Flush Door Shutters

24mm thick made fro Co- Extruded THREE LAYER

RIGID PVC Foam Sheet (Single extruded) with density

not less than 600 Kg / cbm. Outer Layer (0.8-1mm)

thick should be of Rigid PVC with Density not less than

1400 kg/cbm including Providing & Fixing WPC Door

Frame Uperline Patti of 24mm x 6mm Size. Door

should be Water proof, Termite proof, Fire Retardant &

having good screw holding capacity. Providing &

Fixing 100% Solid Wood Plastic Composit (WPC)

Door Frame 90mm x 45mm made from Wood Plastic

Composite (Single extruded Process) material with

dencity 780kg / cbm All as per specifications &

drawings etc. complete as per direction of Engineer-in-

charge. 16.00 Sq.M. 4390.00

47 Providing and fixing fully glazed door upto 7 feet

height with top 2.5 feet panelled with intermediate

glasing of 6mm thick glass, pannel should be made up

of sandwitch type partition made up of 18mm thick ply

of 600x600mm grid with 6mm ply on either side

laminated with 1mm thick sunmica side pannels is

partly fixed inframe with froasted glassing 8mm thick

where as openable portion 12mm toughned froasted

glass with frame work at top and bottom floor spring of

Ozone make with appropriate capacity SS glass handle

24"x35mm long brush finish etc. 5.00 Sq.M. 5550.00

48 Providing and fixing window having extruded

aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with

sliding shutters of horizontal membersize

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ wirh mosquito net With good quality as

directed by EIC shutter of same size to be fixed in

Three track with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing

to frame as per details etc_Alluminium windows Three

track with Mosquito Net. 35.00 Sq.M. 3646.00

ITEM QTY PER RATE AMOUNT

49 Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm (Jindal

Section :2434, @ Wt. 0.643 kg per mt with colour

Powder Coated alluminium frame for ventilation with

5 mm thick frosted glass as details etc complete for

Ventilation 1.50 Sq.M. 1163.92

50 Providing and Fixing Decorative laminated sheet of

mm on 6 mm plywood to be fixed on new wooden

laminated partition with necessary frame from 18mm

plywood including cutting, and pasting without

damaging existing wooden laminated partition with

providing and fixing 12 mm glass on opening to be

fixed and cleaning with all labours and material

complete as directed by Engineer in charge. 16.00 Sq.M. 5320.00

51 Providing and fixing rolling shutters of approved make

made of 80MM wide M.S. laths inter-locked together

thorough their entire length and jointed together at the

ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-

pull operation with gear system including the cost of

hood cover and spring etc. complete, of approved guage

by EIC. [A] Shutters having width below 3.5M. 7.00 Sq.M. 3519.21

52 Providing erecting fixing double coated Syntex of

Equivalent PVC ( ISI ) mark Water tank of required

capacity each with all necessary fittings and connection

etc complete on terrace as directed by EIC. 2000.00 Per Ltr. 3.91

53 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be fixed on

the wall with the help of clamp at every two meter c/c

or shall be concealed as directed including necessary

fittings etc. Including testing of ppe and joints and

fixing the same with adhesive solvent, Including cost of

all materal (A) 15mm 20.00 Mtr. 71.93

54 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be fixed on

the wall with the help of clamp at every two meter c/c

or shall be concealed as directed including necessary

fittings etc. Including testing of ppe and joints and

fixing the same with adhesive solvent, Including cost of

all materal (A) 25mm 40.00 Mtr. 90.93

55 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be fixed on

the wall with the help of clamp at every two meter c/c

or shall be concealed as directed including necessary

fittings etc. Including testing of ppe and joints and

fixing the same with adhesive solvent, Including cost of

all materal (A) 32mm 100.00 Mtr. 117.97

ITEM QTY PER RATE AMOUNT

56 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent or as

approved by Engineer in charge. Pipe shall be fixed on

the wall with the help of clamp at every two meter c/c

or shall be concealed as directed including necessary

fittings etc. Including testing of ppe and joints and

fixing the same with adhesive solvent, Including cost of

all materal (A) 40 mm 25.00 Mtr. 146.65

57 Providing & fixing to wall, ceilling, flooring plumb by

means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 10 Kg.F /cm2 working pressure PVC

pipes incl. joining with approved solution & all fittings

like bend, tee. Y bend plug bend with water tight joints(

Finolex or equivalent )for soil waste & ventilating pipes

etc. of the following outside dia. Low density complete

with necessary fittings, wall clamps etc. including

making groove in the wall ,ceiling & floor -75 mm dia

58 Providing & fixing to wall, ceilling, flooring plumb by

means of GI clamps of 18 gauge sheet with 1 to

mtrs. Distance 10 Kg.F /cm2 working pressure PVC

pipes incl. joining with approved solution & all fittings

like bend, tee. Y bend plug bend with water tight joints(

Finolex or equivalent )for soil waste & ventilating pipes

etc. of the following outside dia. Low density complete

with necessary fittings, wall clamps etc. including

making groove in the wall ,ceiling & floor - 90 mm dia

59 Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials. 40.00 Mtr. 888.90

60 Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 160 mm diametre x 210 mm length x 196 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials. 40.00 Mtr. 826.12

ITEM QTY PER RATE AMOUNT

61 Providing & Fixing EUROPEOUN W.C with PVC

Flush Tank, Soft close Seat Cover, health faucet (ABS

body) & intergal "S" Trap including Jointing the Trap

with Pan and Soil pipe. Wall hung shall be fixed on S.S

heavy duty rack bolt having 16mm dia, 165mm length

using Plastic sleeve Make by Using Drill Bitt Only.

Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. Make of Wall Hung, faucet, Flush Tank and

other accesories Shall be Johnson, Hindware, CERA,

Jaquar or equivalent. 4.00 Nos. 6453.00

62 Providing and fixing Urinal of approved quality

including connecting the Urinal with waste pipe, tap etc

complete. [A] squatting plate pattern white earthenware

63 Providing and fixing wash basin wall Mounted or Table

Top of make varmora/hindware/jaquar/simpolo or

equivalent Brand or of approved quality with single

hole for pillar tap with shanks and back nuts with C.I.

or M.S. Brackets painted white paint including cutting

holes and making good the same including C.P. brass

for waste and waste Pipes. washbasin 600 x 450 mm.

Size with pillar cock of above make as approved by EIC

64 Providing and fixing sink with CI or M.S brackets

painted white including cutting holes iin walls and

making good the same but excuding fittings. Vitreous

china sink (i)600x450x150mm) 1.00 Nos. 2303.62

65 Providing and fixing S.W Gully trap with C.I Grating

brick masonary chamber and water tight C.I cover with

frame of 300MM x 300MM size (inside) with standard

weight. [I] Square mouth traps. [B] 150MM x 100MM

size 'P' or 'R' type. 3.00 Nos. 1234.57

66 Providing and fixing Bib Cock of 25mm Jaquar or

equivalent brand with necessary other materials and

piping connections for bathroom etc. complete or as

directed. 6.00 Nos. 1897.50

67 Providing & Fixing 15mm C.P. Angle stop cock Heavy

duty with cap. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete. 6.00 Nos. 521.00

68 Providing and fixing Gun metal check or non-return

full-way wheel valve. [D] 32MM dia. 3.00 Nos. 311.61

69 Providing and fixing PVC SWR Nahni trap IS

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls. 10.00 Nos. 594.29

ITEM QTY PER RATE AMOUNT

70 Construction of brick masonary chamber for

underground C.I. inspection chamber and beds with

bricks having crushing strength not less than 35kg cm2

in C.M. 1:5 C.I cover with frame (light

duty)455mmx610mm internal dimension total weight of

cover with frame to be not less than 38k (wt. of cover

23kg) and with frame 15kg. RCC top slab with 1:2:4

mix (1-cement 2-coarse sand 4-graded stone aggreate

20mm size) foundation concrete 1:5:10 inside plaster

15mm thisck with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concerete etc complete (i) inside dim 455mmx610mm

and 450mm deep for single pipe line 5.00 Nos. 2903.89

71 Providing and fixing 600 x 450mm bevelled edge

mirror of superior glass mounted on wall by SS stud of

appropriate size as directed by EIC. 3.00 Nos. 850.90

72 Providing and fixing of ISI approved quality Hydraulic

door closer as directed. 4.00 Nos. 1050.00

73 Providing and fixing C.P Brass towel rail complete with

C.P Brass brackets fixed to wooden plugs with C.P

Brass screws. [B] 600MM X 20MM size. 3.00 Nos. 610.32

74 Providing and fixing steel soap container with screws

etc complete. 3.00 Nos. 300.00

Supplying and fixing to doors, windows, ventilators,

cup-boards following fixtures and fastenings of

approved quality with wooden or metal screws, nuts

and bolts as directed or as per drawing and

specifications etc. complete as directed by EIC.

75 Flat Latch ( Aluminium ) - 250 MM long. 15.00 Nos. 100.00

76 Handle ( Aluminium ) - 150MM long. 30.00 Nos. 80.00

77 Door Stopper ( Brass ) - 150MM long. 15.00 Nos. 150.00

78 Tower Bolt ( Stainless steel ) - 150MM long. 15.00 Nos. 80.00

79 S.S best Chromium plated Aldrop - 14MM dia. &

300MM long. 10.00 Nos. 450.00

80 Providing & Fixing SIGN BOARD having size

2000X1000mm for Sub-division made from 16 guage

M.S Sheet having frame work of 35X35X3 mm M.S

angle alround & 2 vertical intermediate angle supports

at equal distance welded to sheet with 2 Nos. of

50X50X6mm. M.S angle posts 3.0 M. long with

arrangement of bolting, 3 coats of oil painting

etc.complete as directed by EIC. with letter writing in

Flex Banner 1.00 Nos. 2250.00

81 Brass C.P mortise lock ( GODREJ MAKE ) with

handles of approved quality. 4.00 Nos. 685.00

82 Providing and fixing 450MM x 600MM size light type

C.I Manhole covers with water tight C.I fame & fixing

the same in concrete etc. complete as directed by EIC. 3.00 Nos. 948.68

83 Providing half nosing to edge of Kotah Stone / Marble

etc. complete. 69.00 Mtr. 58.65

84 Providing and fixing stainless steel font on any surface

at any height with necessary fasteners and fixtures etc

completed as directed by EIC. 49.00 Sq.ft 1242.00

ITEM QTY PER RATE AMOUNT

85 Providing and laying interlocking Pre-Cast Rubber Dye

inter locking concrete Block 60mm thick with grade of

concrete M-200 pnumatic compressed by mechanically

pressed and as per approved design including 75 mm

sand layer for levelling and filling the joint with sand in

proper line and level. 485.00 Sq.M. 603.00

86 Providing and fixing steel cupboard shutter of 20 gauge

with steel frame & fixing the frame with brick masonary

including locking arrangement with 1 coat of primer (

red oxide ) i.e asian, dulux or its equivalent and 3 coats

of approved oil paint i.e asian, dulux or its equivalent

etc. complete as per requirement and instruction of EIC.

87 Providing and fixing pre-cast concrete kerb stone of

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete. 50.00 Sq.M. 406.35

88 Providing & fixing Fix louvers of 114 mm wide GI

sheet having thickness of 0.55 mm & weight not less

than 490 gm/ meter roll formed to create 84 mm wide

louver snap fixed on special shaped GI channel. Fix

louvers & channels shall finished with powder coating

of 55 micron including scaffolding, labour etc. upto all

height desing and colour as approved by EIC. 16.10 Sq.M. 3535.00

89 Providing and fixing M.S conduit pipe gate/grill gate,

form appropriate secton and M.S.flat,square bar, M.S

sheet and grouting the pvot as per drawing and design

with necessary brackets, hold fasts, locking

arrangement on top & aldrop on both the side. 480.00 Kg 116.20

90 Providing and fixing terra cotta jali in fabrication frame

or in masonary or RCC member gap with 63 mm wide

with required cement based adhesive materils as per

91 Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead with two coats of oil

paint. (A) In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted

to common rafters and the like .( all materials shall be

brought by contractor) 2050.00 Kg 95.18

92 Providing semi corrugated colored G.I. sheets roofing

fixed with galvanized iron J or L hooks, bolts and nuts

8mm diameter with bitumen ancl G.L iimpet compiete

excluding the cosi of,purling, rafters and trusses.(1)

0.50 mm thick sheet 164.00 Sq.M. 656.00

ITEM QTY PER RATE AMOUNT

93 Constructing 125 mm thick Controlled cement concrete

M- 250 Grade with Trimix with power trowling sheet

form work with M.S. channels, srinking of fair

hardness, Non oxidzing, Non metalic, heavy duty floor

hardner of FOSROC or equivalent at the rate of

Kg./Sq.M. with 10 mm x 10 mm size groove cutting in

concrete as constructution joint with necessary

equipments, labors as per design etc. Complete.

94 Applying general insecticide pest control treatmet to

floors, cupboards etc including labour materials etc.

complete Using Hepltacloride 20 EC as per 6113_pests

consentration wight .50 percent is recommended one

litre chemical emulsion dilute with 39 litre of water will

give. Total dilute concentration will be 40 litre inclusive

of one litre chemical emulsion application .5 litre

chemical/sqm surface is recommended as per IS.

95 Providing and fixing 8 mm thick gypsum PVC

laminated false ceiling placed on main GI central black

linear tee of 32*24*.28 mm with long and short cross

GI central linear black tee of 26*24*.28 mm and wall

GI angle of 20*20*.30 mm suspended by 18 gauge GI

wire including necessary fixures and fasteners etc

completed as directed by EIC. 19.00 Sq.M. 655.00

96 Drilling of bore well of 165mm.dia. by machine in hard

rock etc., complete, truly vertical with all equipments

and labours etc., complete as directed by E.I.C.a) 0 to

150 M depth. 150.00 Rmt 226

97 Providing, fixing & lowering heavy duty 10 KG / CM2

P.V.C. casing pipe suitable for 160 mm dia bore well

including necessary coupling connector, solution etc.

complete as directed by E.I.C. 12.00 Rmt 452

98 Providing & Joining the flat copper cables sufficient for

7.5 HP pump set etc., complete as directed by E.I.C.

a. 4mm flat cable 200.00 Rmt 75.00

99 Providing & Fixing top cap for 150mm.dia. pipe

clamps, socket & other accessories required for

completing the job as directed by E.I.C. 1.00 Nos. 662.00

100 Providing & Fixing standard switch board with ampere

and volt meter and wooden covered box with locking

arrangements and fiting on wall as directed 1.00 Nos. 1500

101 Providing and fixing best quality of HDPE pipe of

approved ISS quality with all accessories fittings

jointing etc. suitable for submesible pump lowering in

bore etc. complete as directed by EIC.(B) 32mm dia.

Outer 10 kg/cm2 130.00 Rmt 87

102 Supplying and lowering the approved ISI submersible

pump for 2HP/24 stage in bore well etc. comp. as

directed including ISI approved MEI type oil immersed

auto transformer starter commisionning and testing to

required delivery head(All accesaries will be paid

separately) 1.00 Nos. 12000

ITEM QTY PER RATE AMOUNT

103 Providing and fixing concertina coil fecing with

punched tape concertina coil 600mm dia 10meter

openable length (total 90mt) having 50nos round per

mtr length, upto 3 mtr height of wall existing angle iron

"Y" shaped placed 2.4 mt to 3mt apart with 9 horizontal

R.B.T. reinforced barbed wire stud tied with GI staples

and GI clips retain horizontal, including necessary bolts

or GI barbed wire tied to angle iron, all complete as per

direction of EIC with reinforced barbed tape (RBT)

spring core (25mm thcik) wire of high tensile strength

of 165 (cost of MS angle, CC block shall be paid

separetely) 60.00 Rmt 282.00

104 Providing and fixing curtain made up of 50% cotton

and 50% polyster mixed cloths with chully at the back

4" pleat double belt at the bottom with 1" dia MS steel

coated pipe with end socket,the curtain should have

proper overlap with window on sides were feasible with

2" dia steel ring on canvas putta with all labour material

any other consumable transportation etc.completed as

directed. 35.00 Sq.M. 1400.00

105 Providing and planting Palm tree about 5 to 5.5 feet

height as per EIC. 15.00 Nos. 1000.00

106 Providing and planting Ficus tree about 4 feet height as

per EIC. 15.00 Nos. 500.00

Estimated Cost Sectoin-II (CIVIL WORKS) in Rs.

107 Main Fire Hydrant Pump LUBI/KSB/KIRLOSHKER

make SITC of: Back pull out type -Single Stage, Self

Mriming, Centrifugal Pump for Main Fire Pump with

Electric Motor, Meachanical Seal, Base frame and

Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft-

SS 410, Sleeve- SS410. Flow Capacity: 450 LPM

Head: 30 to 35 mtr 2900RPM Pump shall be capable of

furnishing not less than 150% of rated capacity at a

head not less than 65% of rated head he shut off head

shall exceed 120% of rated head. UOM:-Price Per

Complete set of Pump + Motor + Accessories.

108 Supplying & erecting approved control cubical panel

(Star - Delta) made from16 G. CRCA sheet duly

painted with epoxy powder painted inside and outside

with hinged doors and locking arrangement, consisting

of suitable size of ON- OFF isolator (AC - 3/23 duty)

main fuses, single phasing preventer cum water level.

Guard (Complete unit), Toggle switch to by pass Single

phase preventer cum WLG, indicating lamps for R- YB

phases, over load relay, Automatic water level

controller, Ammeter & Voltmeter each with two way

selector switch incoming wires duly socket Crimped,

Panel to be erected on angle iron frame grouted on wall

as directed. Star Delta & main contactor, overload

relay, thermal / Electronic Star delta cutoff timer, start -

stop push buttons. The isolator overload relay &

contactors of L& T, Siemens, Redex or Cuttler Hamer

make only. Panel to be erected on angle iron frame

ground on wall.make-Sky/Belife/L&T 1.00 Nos. 18623.00

ITEM QTY PER RATE AMOUNT

109 Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above ground

pipe. with necessary pipe itments (Flanges, Bands,

Socket etc.) Vertically every 3 mt. & Horizontaly every

2.5 mt. painted with one coat of primer (Zinc Oxide) &

two coats of finshing paints GI support / Clamps /

Hangers/pipe etc. Hardware (Gaskets, Nut-Bolts, Paint

etc.) Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating

and wrapping etc. Complete.................100 mm diameter

110 Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above ground

pipe. with necessary pipe itments (Flanges, Bands,

Socket etc.) Vertically every 3 mt. & Horizontaly every

2.5 mt. painted with one coat of primer (Zinc Oxide) &

two coats of finshing paints GI support / Clamps /

Hangers/pipe etc. Hardware (Gaskets, Nut-Bolts, Paint

etc.) Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating

and wrapping etc. Complete.................80 mm diameter

111 Pressure Switch with Siphon Tube and Cock. Supply,

Installation and Testing of: Pressure Gauge with Siphon

Tube and Cock. MOC:-100 mm Dial- Glycerin filled-

Stainless Steel Body Pressure Gauge with GI Siphon

Tube and Brass Cock. Size:-Dial: 100 mm Range: 0 –

15 Bar (kg/cm2) for 100 mm make-

Danfoss/Orion/Indfos 1.00 Nos. 1780.00

112 Pressure Gauge with Siphon Tube and Cock. Supply,

Installation and Testing of: Pressure Gauge with Siphon

Tube and Cock. MOC:-100 mm Dial- Glycerin filled-

Stainless Steel Body Pressure Gauge with GI Siphon

Tube and Brass Cock. Size:-Dial: 100 mm Range: 0 –

15 Bar (kg/cm2) for 80 mm make-Airmaster/H

guru/Fiebig 1.00 Nos. 1535.00

113 NON- Return Valve Dual Plant Supply, Installation

and Testing of conforming to IS: 5312 complete with

rubber gasket, GI bolts, nuts, washers etc. as required

with necessary pipe fitments, hardware and

consumables. MOC:-Body: SS.plate SS

100 mm dia make-Zolato/Kartar/Osko 1.00 Nos. 10800.00

ITEM QTY PER RATE AMOUNT

114 Fire Hydrant Landing Valve IS 5290 (Stainless Steel

(SS-304), ISI Marked): Supply, Installation and Testing

of: Fire Hydrant Landing Valve with necessary pipe

fitments, hardware and consumables. Stainless steel

Female single outlet type – “A“Hydraulic,Test :

Kgf/cm2 202 working parts, Water Test : Water

tightness 14kgf/cm2, Flow Test : 900 LPM at

kgf/cm2, MOC:-Body: Stainless Steel (SS-304),

Working Parts: Stainless Steel (SS-304), Coupling:

Stainless Steel (SS-304), Standard: -ISI Marked. Size:-

63 mm (Flange End: NB 75 mm, PCD 160 mm) MAKE

: Newage/Aaag/Sangam 2.00 Nos. 4265.00

115 Fire Hose reel drum Ahemdabad type 25 mm x 30 m

Supply, Installation and Testing and commisoning: ISI

884. With Thermoplastic pipe with SS Shuttoff Nozzle.

Standard: - ISI Marked & TAC Approved Hose. Size:-

25 mm dia x 30 m long . MAKE :

Newage/Sangam/Fusion 2.00 Nos. 3890.00

116 Fire Hose pipe type B Is 636 and male female

coupling intenseous SS 304 with GI binding legth

15mtr complete set . MAKE : Newage/Sangam/Fusion

117 Cabinet For Fire Hose (Hose Box)- Double door Type

Supply, Installation and Testing of: Fire Hose Cabinet

(Hose Box) suitable to accommodate 15 m long fire

hoses and 01 no. of nozzle. With Lock-n-key facility.

Wall Mounting Design. MOC: 18 Gauge MS Box with

Powder Coating Standard with Size

500mmX500mmX250mm:- Suitable MAKE :

Newage/Sangam/Fusion 2.00 Nos. 3402.00

118 Short Branch Pipe IS 903 Conforming Nozzle.

Supply, Installation and Testing of: Short Branch-pipe

Nozzle. MOC: Stainless Steel (SS-304). Standard: ISI

Marked, Heavy Quality. Test : 21 Kgf/cm2 No. MAKE

: Newage/Aaag/Sangam 2.00 Nos. 1780.00

119 Supply Installation and commisioning of 25mm Brass

Ball valve for connection of hose reel thermoplstic pipe

make-Zolato/Venus/Sant 2.00 Nos. 1780.00

120 Butterfly Valve 100mm Dia IS

Providing fixing testing and commissioning of SS.

Butterfly valve of class PN 1.6 rating of following

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk: SS,

Seat: Nitrile.Make Zolato/Kartar/Osko 1.00 Nos. 7640.00

121 Fire Service In-let (In-let Connection for Fire

Brigade)-2 Way Type. Supply, Installation and Testing

of: Fire Service Inlet with necessary hardware and

consumables. MOC:-Body: Heavy- uty CI.

Couplings/NRV:SS Standard: -Made As per IS

Standard- Heavy duty quality. Size:-Couplings: 63 mm,

100 mm E-table Flange End .MAKE :

Newage/Sangam/Fusion 1.00 Nos. 3652.00

ITEM QTY PER RATE AMOUNT

122 Providing, Installation and Testing Fire extinguisher IS

15683-2006 ISI marked BIS with Peso 3 years ABC

powder type 6 Kg. Supply, installation and testing of

ABC powder fire extinguisher necessary hardware and

consumables. Stored pressure mechanism. Charged

with MAP-50% (ABC) Dry powder. with wall

mounting clamp.Make -V Safe/ Kanex /Ceasefire 4.00 Nos. 1825.00

123 Providing, Installation and Testing of Fire extinguisher -

CO2 Gas type 4.5 kg. Supply, installation and testing

of CO2 Gas fire extinguisher with necessary hardware

and consumables. Standard - Confirming to IS:15683-

2006 with ISI mark with Peso 5 years certified. Make -

V-Safe/Kanex / Ceasefire 5.00 Nos. 4275.00

124 Providing and fixing AUTOGLOW Signages in Block

/ Small Letters of Specified Sizes: as per design and

requirement as directed by EIC. 10.00 Nos. 185.00

125 Providing and fixing, testing and commissioning of

Conventional Fire Alarm control panel for G+1

building for 2 zones with complete wiring feeting

required as per engineer insruction 1.00 Job 16890.00

126 Providing and fixing, testing and commissioning of

Hooter cum strobe sounder with wiring complete

fittings. 4.00 Job 1456.00

127 Providing and fixing, testing and commissioning of

Manuel Call point with wiring complete fittings. 4.00 Job 1230.00

128 Making of hole by core cutting in concrete member or

masonary wall of diameter 0 to 200 mm as per

requirement including all man material and charges of

core cutting machinery as directed by EIC 4.00 Nos. 700.00

129 Charges for administrative consulting for obtaining

Fire NOC from concern department with all the

requried docuemnts and process and providing fire

system annual maintenance service contract for keeping

operational the fire safety system in all respect for three

(3) years & providing mockdrill, awarness traning for

staff as per rules of fire at every 6 months as per GOG

NBC Fire norms. 1.00 Nos. 50000.00

Estimated Cost Sectoin-II (FIRE SAFETY WORKS) in Rs.

130 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete Cat III

ITEM QTY PER RATE AMOUNT

131 Point wiring for FAN with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

cat-III 25.00 Pts. 629.23

132 Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories cat-III 36.00 Pts. 241.39

133 Point wiring for Two Way Controlled Light Point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of .ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires erected in below type of pipe

with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary batten/angle

holder or ceiling rose or H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat iii

134 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed by

Engineer In charge (3) Two Pin/RJ-11 Telephone

Socket [B] For Two Gang cat-III 7.00 Nos. 200.99

135 (7) Blank Plate Single Cat iii 57.00 Nos. 24.24

136 (8) Computer RJ-45 socket Cat iii 21.00 Nos. 153.52

137 (9) 16 Amp. SP one way switch cat-III 4.00 Nos. 172.71

138 (10) 6/16Amp. Universal socket cat-III 8.00 Nos. 190.89

139 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole

Modular MCB Switch cat-III 4.00 Nos. 390.87

140 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed (b) 25 mm 380.00 Mtr. 32.32

ITEM QTY PER RATE AMOUNT

141 Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (a)

wire 1.5 sq. mm 70.00 Mtr. 59.59

143 providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm 138.00 Mtr. 107.06

146 providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required.(e) One wire 6.00 sq. mm 132.00 Mtr. 53.53

147 (h) One wire 25.00 sq. mm 2.00 Mtr. 225.23

148 Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of conductors

& nos.of pairs. With necessary connections.[A]

Conductor Size 0.5 mm (a) Unarmoured (2) Two Pairs

149 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT

150 Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard

approved with krone strips (a) Suitable for 10 pair 1.00 Nos. 949.40

151 Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,

modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined. 3 nos.

6A Switch 3 nos. 6A 5 pin Plug

For Modular Type Accessories cat-III 21.00 Nos. 1081.71

152 Decorative call bell Ting-tong box type 250 volts

complete erected 3.00 Nos. 68.68

ITEM QTY PER RATE AMOUNT

153 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9,

THD < 15%,CCT 3000 K to 6500K,Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency >

( fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet cat-III

154 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20 (i) 5-9 watts,Surge-2 KV Cat iii

155 (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting

clips complete.IP20 (ii) 15 watts, Surge-2 KV Cat iii 98.00 Nos. 427.23

156 Providing and erecting Approved make Three Phase &

Neutral LT Heavy Duty Switch Disconnector Fuse Unit

Cubical type for panel mounting complete with

operating mechanism suitable to operate on 415V A.C.

, 23A duty With HRC fuses of suitable load confirming

to IS. 13947 (Part I & III). of following

capacities.(c)100 Amp Cat iii 1.00 Nos. 4442.99

157 Pproviding and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 1.00 Nos. 6173.12

ITEM QTY PER RATE AMOUNT

158 Providing and erecting Approved make Earth fault

Relay suitable to mount with inter connection suitable

to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along

with shunt trip 220V AC. with all internal connections

& complete erected in existing M.S.housing.. (1) 15 A -

159 Supplying & erecting approved make Four Pole 415V

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(B)63 A Cat-III 1.00 Nos. 4785.38

160 Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators,

main cable socket to each bar, erected in existing

cubical panel with necessary connections. (A) Suitable

for 100 Amp. Capacity 1.00 Rmt 1961.42

161 providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996

with ISI Mark cat-III 53.00 Nos. 112.11

162 Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. cat-III 18.00 Nos. 295.93

163 Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (b)40 Amp. cat-III 25.00 Nos. 668.62

164 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable

for(A) single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-

165 (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (b) sheet

steel double door (i)4 way 1.00 Nos. 2339.16

166 providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (ii) 40Amps. DP cat-III 6.00 Nos. 2235.13

167 Providing and erecting Annealed bare Copper wire 8 to

ITEM QTY PER RATE AMOUNT

168 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth

resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (a) For Electrical Installation

up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. 3.00 Nos. 4591.46

169 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket, heavy duty end terminal connection,

danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel

shall be supplied with following approved

manufacturers with following size. (B) The standard 1.50 Sq.M. 14902.55

companies switch gear shall be used and only

ITEM QTY PER RATE AMOUNT

170 Providing , erecting , fabricating the M.S. structure as

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing

duly painted with one coat of red oxide with erection

on site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing

complete. 30.00 Kg 77.77

171 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B)

1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 10.00 Mtr. 217.15

172 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber ring

for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of

cables.(B) 3 & 1/2 core 35/50 Sq. mm 2.00 Nos. 75.75

173 Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (C) 16/25 Sq.mm. 2.00 Nos. 15.15

175 Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make

shall be approved by Engineer in charge))

176 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without leakage

and earthing. 17.30 Mtr. 108.07

177 Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing. 25.00 Nos. 108.07

178 Providing 2.5mm.thick laminated acrylic sheet to cover

the fan hook or Fan box. 25.00 Nos. 18.18

ITEM QTY PER RATE AMOUNT

179 SITC of Digital / PCM / TDM EPABX System having

SMT design, system with flexible universal slots.

Inbuilt Auto attendant facility, Minimum 15 Nos.

conference, Analog extension line, Calling GSM, E&M

line, PRI / EI & VOIP program me through Analog

telephone digital key from Ethernet, public address

cord, shall have unrestricted simultaneous dialing

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking,

Class of Service, Quick Dial-Single Digit dialing of any

two external number, Once only ring device, Chairman

/ Secretary - Do not disturb Facility, Power Down

Mode, Hot Line, Hot Outward Dialing, Day Night

Mode, Auto Call Back, Barge-in, Call Pick Up & Call

Transfer, Call transfer while Ringing with Voice Guide

System, (DISA), Caller ID (CLI), CLI Base ECF, CLI

Base routing Internet Ready Port, External Music Port,

Call Budgeting, Call Most Calculation (ASMDR), DID

Direct Inverse Dialing, External Music Input, Fax

Homing, Global Directory Printing with following

capacities [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ] [A] No of

Extension 16, No of Junctions 6, 8 Port IP Resource in-

built, 4 Port Web base Video Conferencing, No of

expandable ports : 48, Operators Console - 01 1.00 Nos. 45398.49

Providing and: ISDN

erecting Standard Push button telephone

(DTMF) Phones [[Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ] 7.00 Nos. 311.08

181 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚ C within a hour, The water cooler

should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats, relay etc.

complete with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless Steel.

182 Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post

carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity &

erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage

Tank 1.00 Nos. 13053.24

183 Supplying and erecting approved make panel mounting

type Digital Voltmeter having 3 digits LED display,

to 750 AC Volts range erected on existing panel board

with all connection, wiring etc .with manufacturers

calibration certificate. 1.00 Nos. 1275.63

ITEM QTY PER RATE AMOUNT

184 Supplying and erecting approved make panel mounting

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate. 1.00 Nos. 1558.43

185 Supplying and erecting Ammeter / Voltmeter selector

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections. 2.00 Nos. 317.14

186 Providing & erecting L.T. Current Transformer with

bar primary 50/5 to 1000/5 ratio 15 VA burden erected

in existing CRCA box duly secured with insulating

materials connected to the meter 3.00 Nos. 274.72

187 Supplying and erecting approved make suitable panel

indicator LED type lamp, lens cover, complete erected

with necessary connections. 3.00 Nos. 43.43

188 Providing & erecting open well horizontal mono block

pump set with cast iron body, complete for three phase

submersible motor having [C] For 3 HP 3 phase open

well horizontal mono block pump set suitable for

LPM to 270 LPM @ 11 mtr to 33 mtr head suitable for

50/65 mm dia delivery pipe Cat.II 2.00 Nos. 15707.52

189 Supplying & erecting approved make motor control

cubical panel (Direct - on - line) made from 16 G.

CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay

& contactors will be of L & T, Siemens or BCH make

only. (A) DOL up to 5.0 H.P. 2.00 Nos. 7722.46

190 Lowering of submersible motor pump set at the depth

of following ,complete with required. Nos. and size of

casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of

each pipe with coupling to take the load of the pump set

and pipe assembly filled up with water(D)For Open

well Horizontal submersible pump set for sump well

(i) 1 HP to 5 HP 2.00 Per Jobs 856.48

191 Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

approved make of following Size.(B) 3 Core x 2.5 Sq.

192 Supplying of following size of HEAVY UPVC column

pipe with coupler and wire lock [B] 50 mm dia 2.00 Rmt 359.56

ITEM QTY PER RATE AMOUNT

193 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.(ii)

above 48 to 60 Watts Cat iii

Estimated Cost Sectoin-III (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ A = I +II + III ] in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- A*B ]

GRAND TOTAL [C = A +/- A*B ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot