Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC OPPOSITE BACHAT BHAWAN GHUMARWIN DISTT BILASPUR H P | GHUMARWIN | BILASPUR | HIMACHAL PRADESH | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹6.3 L+₹69,235 (12.4%)Rejected-Finance VILL FAGOG P O BALOH TEHSIL JHANDUTTA DISTT BILASPUR HP | L2 | Rejected-Finance REJECTED | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹13,260
Closing Date
15 Apr 2021, 4:00 pmClosed
Executive Engineer Electrical
HIMUDA Electrical Division Dharamshala Distt. Kangra
Providing internal EI work to Llibrary and toilet block therein
2021_HIMUD_45755_1
HIMUDA/EDD/W7/VOL-X/1381-1405
Open Tender
Electrical Works
Item Rate
545 days
Ghumarwin Distt. Bilaspur
Please refer Tender documents.
9 documents required · 9 mandatory
₹413
Yes
₹13,260
Yes
28 Aug 2021
23 Mar 2021
16 Apr 2021
25 Mar 2021
15 Apr 2021
25 Mar 2021
25 Mar 2021 - 15 Apr 2021
Amount
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.
Group C
Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.
Group C
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
2x1.5 Sq. mm.
2x10 Sq. mm.
Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including painting in case of surface cutting the wall and making good the same in case of recessed conduit as required:-
25 mm. dia
50 mm. dia
Supplying and fixing of following sizes of steel conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:-
25 mm. dia
Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.
3x1.5 Sq. mm.
Supplying and drawing LAN cable CAT 5E, solid copper conductor protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.
S.P. 5/ 6 Amps one way Modular switch.
5 pin, 5/ 6 Amps Modular socket outlet.
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-
2 modules (78mmx78mmx50mm)
4 modules(140mmx78mmx50mm)
Supplying & fixing Modular blanking plate on the existing modular metal box as required:-
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.
Supplying and fixing batten/angle holder including connections etc. as required:-
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units 7 nos. energy meter box, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-
300 mm deep (nominal)
Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-
Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:-
Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubical panel, making connections, etc. as required.
100 Amp. -10 KA
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-
Single pole. Cat-A.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amps. Cat-A.
Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
100 Amps. Cat-A.
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amps. Cat-A.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-
Double door-12 way
Supplying and fixing of following way SEGREGATED, triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-
Double door-8 way (8+12+24),7-segment
Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
Extra for using salt and charcoal for pipe earth electrode complete as required.
Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.
Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-
Armoured cable 10 sq. mm (twin core)
Armoured cable 16 sq. mm (four core)
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-
Armoured cable 10 sq. mm (twin core)
Armoured cable 16 sq. mm (four core)
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-
Exhaust Fan, Light duty, 300 mm sweep (Domestic)
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-
Ceiling Fan 1400 mm sweep, Category-A
Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.
Fixed type wall bracket 150 dia, single lamp.(Category-A)
Supplying and fixing of Mirror light VIVA compact & decorative energy efficient luminaire with antiglare diffuser and decorative end cap suitable 11 watt CFL (SU) without lamp (ordering code LHFOECF10Z1W011) of havells make or its equivalent complete in all respect or as approved by Engineer incharge.
Supplying and fixing of Elllipse Neo Hexa Bulk head designed for modren homes availble in non PIR as well as PIR sensor with premium quality diffusur for glare free light and easy to install snapfit installer (ordering codeLHEXCGP7IN5W013 13.5 W LED) of Havelles make or its equivalent complete in all respects or as approved as approved by Engineer incharge.
Supplying and fixing extruded Aluminium batten of 20 watt anodised extruded AI housing high transmissitivity diffuser and high lumen out put (odering code BCSLBAL 20 watt white) Bajaj or its equivalent complete in all respects or approved by the Engineer-in-Charge.
Supplying and fixing of sleek surface mounnted round LED downlighter with Aluminium dia cast body finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation LED 12 watt (odering Code:- BGSLO SLEEK surface 12 watt 6000 K white) of Bajaj make or its equivalent complete in all respects or as approved by Engineer incharge.
Supplying and fixing of M.S fan box (18x10x10) cm with phinolic laminated sheet cover in the front of M.S round 16 mm / 12 mm dia 60 cm long including connection complete in all recpect as required or approved by the engineer incharge at site.
Supplying and fixing LED lamp 10 watt of Bajaj / Havells or its equivalent as required
Suppl;ying and fixing louvers / Shutters for exhaust fan 300 mm as required or as approved by the engineer incharge.
Supplying and fixing of Edge LED street light luminaire with die pressure die cast housing with individual LEDs as light source and lens embedded pc cover having TOP opening seprate drive compartment with IP 66 protection and impact resistance of 1K07 BRTFG 36 W LED V2 or its equivalent complete in all respects or as approved as approved by Engineer incharge.
Supplying and fixing of RJ 45 Jack with cat 6 2 module of Havelles make or its equivalent complete in all respect as required.
Supply, installation, testing and commissioning of below mentioned capacity Hiwall Unit air conditioners complete with Multi Fold Evaporator, Clean Air Filter ,Hidden LED Display fan and fan motor, controls, etc. as per specification and drawing Split Air Conditioner 1.5 Ton (GLS18B32LR) Enjoy coolness in this summer heat with this two-way swing feature that directs the air flow in your AC horizontally by opening the air vane in the counter clockwise direction etc ( LLyod or its equivalent make) complete in all respect with connections as required or as approved by the engineer incharge .
Split Air Conditioner 1.5 Ton (Hat & Cold)
Supplying and fixing 20 Amps, 240 volts, i phase industrial socket outlet, 4-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 30 Amp TPN-MCB, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.
Kashmir Singh
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .