Repairing of 250 Kva HT transformer and other electrical works at Lift irrigation cum dewatering scheme KP Bala Old of MISP Pattan.

Amount

Mechanical transportation, loading, unloading of transformer using minitruck like Tata mobile, Bolero camper or similar from site to workshop or from workshop to site after necessary repairs.

Dismantling of 33/0.4 kv or 11/0.4kV transformer by way of disconnecting of all HT and LT connections, opening of top lid, draining out of T. Oil and its safe placement for further refilling, taking out of coils after removal of core assembly, etc. Job also includes detaching of core HV/LV coils.

Rewinding of Aluminium wound 3-Ph 11/0.44kV distribution transformer by way of P/F of HT Aluminium wound torroidal coils of proper gauge, insulation and separated with proper specification by way of using silicon taping, teflon paper, cork sheet and Bakelite sheets. Complete winding to be done and connections coming out duly insulated. LT windings shall be circular and concentric with HT windings on the outside (Approximate weight of ach HT coil = 6kgs) The connections shall be connected in delta or star for primary winding and secondary winding as specified, the neutral with separate insulated terminal. The job also includes decarburising laminated core. The core then firmly fixed with channelled frame to prevent noise and vibration. The arrangement of winding shall made robust in electrical /mechanical construction and should permit free circulation of oil to avoid hot spots. (Note: The unserviceable aluminium windings extracted shall be property of the firm and is taken into account for estimation of rates).

Rewinding of Aluminium wound 3-Ph 11/0.44kV distribution transformer by way of P/F of LT Al wound Legs of proper gauge, insulation and separated with proper specification by way of using silicon taping, teflon paper, cork sheet and Bakelite sheets. Complete winding to be done and connections coming out duly insulated. LT windings shall be circular and concentric with HT windings on the outside. (Approximate weigth of LT leg = 16kgs) The connections shall be connected in delta or star for primary winding and secondary winding as specified, the neutral with separate insulated terminal. The job also includes decarburising laminated core. The core then firmly fixed with channelled frame to prevent noise and vibration. The arrangement of winding shall made robust in electrical /mechanical construction and should permit free circulation of oil to avoid hot spots. (Note: The unserviceable scrap aluminium windings extracted shall be property of the firm and is taken into account for estimation of rates).

Heating of transformer core in Electrically operated oven for removal of moisture.

Filtration of T oil for removal of carbon, impurities and moisture

Providing of Transformer oil (preffered make: Indian oil servo/HPCL/Power oil for topping.

Providing and Fitting of bimetallic clamps.

Providing and fitting of rubber gasket with nuts and bolts to the transformer tank.

Complete assembling of the transformer by way of fitting of HT/LT coils in the tank. Job further includes closing of the transformer lid by way of fitting of existing nuts/bolts and gaskets. Refilling of t.oil upto required level in tank. Reconnecting of HT/ LT connections and testing.

Providing and fitting of 20W Led light with IP 65 rating. The Job includes wiring of the light with 1sqmm FRLS copper wire and 6A MCB with gang box for ON and OFF operation.

Providing of LED Lantern with Twin Charging mode – Charging Cable or Solar Panel (inclusive of panel) (Syska/ Havells/ Andslite/ Philips)

ishaq electricals