ADDN/ALTN OF BUILDING NO P-4 AND SPECIAL REPAIR TO MAIN GATE AND MAIN GUARD ROOM AND PROVN OF PARAPET WALL ALONGWITH RAIN WATER PIPES AND GALVALUME SHEET CHAJJA FOR BLDG NO P-1 AT GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Dismantling Floor, Hearth or Wall Tiling, etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Dismantling structural steel or Mild steel work of any discription not otherwise provided for, complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling/removal of existing water proofing membrane of any description and removal of material out of MOD land/sites etc complete all as specified and directed.

Taking down Wooden Chowkat or Frame with Shutter (without taking off Shutter from the Frame), exc. 1.5 Square Metre but not exc. 4.0 Square Metre Each, complete all as specified and as directed.

Taking down Chowkat or Frame (any type) with Shutter (without taking off Shutter from the Frame), n.exc. 1.5 Square Metre Each, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.

Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M & L cement concrete 1:4:8 of type D2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M & L for Reinforced cement concrete1:2:4 type B1 (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M & L for Reinforced cement concrete1:2:4 type B1 (using 20mm graded aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M & L for formwork to sides and soffits of floor or roof beam, rough finished of flat concrete surface including suppots, overhangs etc complete all as specified and as directed.

M & L for Reinforced cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for fromwork to flat rough finished surfaces of concrete sunpended slab not exc 200mm thick horizontal or sloping complete all as specified and as directed.

M&L providing reinforced cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate as in roof slabs supported on walls surfaces of concrete flat complete all as specified and as directed.

M&L providing reinforced cement concrete type B1 (1:2:4) using 20 mm graeded stone aggregate as in chajja complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia over cut to length, bent to shape required including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia over cut to length, bent to shape required including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

All as per item No 28 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, PCC 1:3:6 typeC1 (20mm graded aggregate exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces other than fair faces of brick work or concrete surface mixing with WPC as per Manufactures instruction, finished even and smooth without using extra cement complete all as specified and as diected. Note : WPC shall be measured and paid separately.

M&L rendering 12mm thick in cement plaster 1:6 on fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as diected.

M&L rendering 10mm thick in CM 1:4 on concrete surfaces of roof slab, mixing with WPC as per Manufactures instruction complete all as specified and as diected.

M&L rendering 5mm thick in CM 1:4 on ceiling of concrete surfaces and complete all as specified and as diected.

Supply only Liquid water proofing compound.

M & L for complete removal of existing treatment of ceiling and applying three coats of white wash complete all as specified and as directed.

Material & Labour for preparing new Plastered Surfaces of Walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Camouflage pattern) with silicon additives @ 1.43 litre/ 10 sqm, over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material & Labour for preparing new Plastered Surfaces of Walls and applying two coats of plastic emulsion paint over a coat of primer over 10cm girth or width, not otherwise described complete all as specified and as directed.

M & L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as diected.

M&L Cement Concrete 1:4:8 (40mm Graded Stone Aggregate) 100mm thick in Sub-bases, complete all as specified and as directed.

M&L for Vitirified Coloured Tiles 9 to 10mm thick (Square/ Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, set and Jointed in Neat Cement Slurry, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4 complete all as specified and as diected. (a) Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Vtirified Coloured Tiles 9 to 10mm thick (Square/ Rectangular) Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed.

M&L Non-skid Glazed Ceramic Coloured/Printed Tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.6.0 to 7.0mm thick in Flooring, set and jointed in Neat Cement Slurry and pointed in White/Coloured Cement, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Coloured Glazed Ceramic Tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 15mm thick rendering as Screed or backing coat of wall tile in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, including various PVC angle/section all as per manufacture instruction and specificationas including taking down carefully the existing electric point wiring and making it concealed by cutting grooves on brick walls as required at site for wall panelling complete all as specified and as directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L for preapring clean and dried plaster surface and applying a coat of oil based bitumen primer confirming to (IS: 3384) at the rate of 0.30 litrs per Sqm and then laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with non woven polyster reniforced membrane having thermal insulation with mineral gravel on upper side of membrane land on primed surface by torch application method complete all as specified and directed.

M & L for 75mm thic cement concrete type C1 1:3:6 (20mm garded stone aggregate) as in plinth protection complete all as specified and as directed.

S&F fibre glass mesh 145Gsm as in various column/beam joints before plaster work with necessary fitting and fixtures complete all as specified and as directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick coloured, having pitch 190mm depth 29mm and tensile strength of 550 Mpa as in roof covering fixed with aluminium selftapping screws of size 50/75mm and aluminium washers of suitable size, complete all as specified and as directed.

M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L Sand filling under floors or in foundation or as cable protection including watering and consolidation complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

S&F factory made single extruded WPC (wood polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonet and natural fibre (wood powder/rick husk wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed screw SS crews having minimum frame density of 750kg/Cum, screw withdrawl strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in postion with MS hold fast/lugs /SS dash fasterners of required dia and length complete as per direction of Engineer-in-charge. (MS hold fast/lugs of SS dash fastenrers shall be paid for seprartely).

S&F Flush Door Shutter 35mm thick, Solid Core Construction with Block Board core and Plywood face Panels commercial type on both side with Decorative face Veneer with Lipping/Frame to match and fitted to Steel Frame, complete all as specified and as directed.

S&F Brass handles, cast type, polished bright 150mm long , complete all as specified and as directed.

S&F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed.

S&F Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 100mm long complete all as specified and as directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

M&L Stainless Steel Wire Cloth 0.71mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F Door Closer Aluminium (Die cast) body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and as directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles With Semi perforated 12mm thick micro tegular edged GRG false ceiling tilesof Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including screed bed 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F double bowl sink for kitchen/heavy duty stainless steel, silver matt style of size 32x18x9 inches with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F PVC (SWR) bends any 75mm bore complete all as specified and as directed

S & F PVC (SWR) bends any 110mm bore complete all as specified and as directed

S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

Supplying and laying of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 with all necessary fittings on walls/ceiling or complete all as specified and directed.

Supplying and laying of CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 with all necessary fittings fittings in trenches complete all as specified and directed.

S&F Table top wash basin of size 650x380x110mm catmax snow white colour including all fittings complete all as specified and directed. Make CERA Cat No.- S2020159 or techno commercially equivalent as approved by GE.

S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specifeid and as directed.

S & F CP pillar cock mixer 2-in-1 for wash basin complete with all fittings and as specified . (Make- CERA Cat No.F2007461 or techno commercially equivalent as approved by GE.)

S&F CP wall mixer 3-in-1 with wall flange complete with all fittings and as specified . (Make- CERA Cat No.F1002401 or techno commercially equivalent as approved by GE.)

S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Waste Pipe 32mm dia (bore) having 35 inches long and fixed complete all as specified and as directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cutting chases, pinning in, making good to facings in brick work where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.

S&F HDHMR 18mm laminated board as in shutter, partition etc of kitchen cabinet fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets including fixing etc complete as per specifications and as directed by the engineer - in -charge.

S & F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S & F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

S&F Zebra roller Blinds (horizontal) alongwith necessary fitting and fixtures for window for light filtering, privacy, UV protection Corded rolled up curtain window of any shade complete all as specified and as directed by Engr-in-Charge

M&L for Screed bed or bedding layer of mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and as directed.

M&L for 300x300mm matte finished outdoor tiles suitable for various outdoor areas of any pattern complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material & Labour for complete removal of existing treatment of Walls including applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Camouflage pattern) with silicon additives @ 1.43 litre/ 10 sqm, over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M & L cement concrete 1:2:4 of type B2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 fixing complete all as specified and directed.

S & F in rapair Pillar taps, cast copper alloy, chromium plated, facny type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Long Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed. Make : Euro model No EU-702 or techno commercially equivalent as approved by GE.)

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps,waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.

S & F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

M&L Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single soceted in any length with rubber ring joints fixed to walls wih clamps all as specified and as directed.

S&F PVC (SWR) bends provided with access door any radius of bore 110mm complete all as specified and as directed.

Supply only integral water proofing compound

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, sockets light fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable 1100V grade drawn through and incl PVC concelled conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLSH cable 1100V grade as earth continuity wire incl modular sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for the following :- (a) One light point controlled by one switch complete

All as per item No 115 here in before but One fan point controlled by one switch complete all as specified and as directed.

All as per item No 115 here in before but One 3 pin socket out let 5 Amps on the independent board.

All as per item No 115 here in before but One 3 Pin socket out let 5 Amps on the same board.

All as per item No 115 here in before but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps.

Supply and fixing Modular switch one way 6A,1 Module, complete all as specified and directed.

Supply and fixing Modular switch one way 16A,1 Module, complete all as specified and directed.

Supply and fixing Modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed.

Supply and fixing Modular socket 16/15A-2/3 pin combined 2 Module complete all as specified and directed.

Supply and fixing Modular Fan Regulator, 120W, 2 module complete all as specified and directed.

Supply & fix ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed.

Supplying and fixing of sheet metal enclosure, single phase, double door SPN DB 4 way, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) SPN/ TPN complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing of sheet metal enclosure, single phase, double door SPN DB 12 way, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) SPN/ TPN complete all as specified and as directed by Engineer-in-Charge.

Supplying and fixing 240 Volts 10 KA 'Ç' Curve MCB SPN of 40 Amp capacity complete all as as specified and directed.

Supply & fix MCB SP 6 to 32 Amps 10 KA 240 V, 10 KA 'Ç' Curve complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including conencting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fix ceiling fans complete with blades, down rods as per site requirement and accessories, 1 Phase, 230 V, 50 Hz, AC, 1200 mm sweep. Min air delivery 210 CFM with brushless direct current motor (BLDC, including down rod, Nut,Bolt,Clamp, hold fastener) complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sqmm 2 core complete all as specified and directed.

M&L for brick protection cover to underground cable with sub-class ‘B’ old size over burnt bricks laid dry and flat across the axis of cable, abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6mm thick burried directly in ground not less that 2.25 m deep below normal ground level and top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical palte No 3 connected to earthing test point incl excavation, earth work in any type of soil strata, PCC chamber, 40 mm dia GI med grade pipe as protection of strip and 15 mm dia GI Med grade watering pipe, funnel, wire mesh etc including testing on complete all as specified and directed.

M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 4 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVC Conduit with accessories incl 4 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire complete all as specified and directed. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length.

UMA CONSTRUCTION (BID ID -3473609)

Shreeganesh Construction (BID ID -3473588)

partechengineers (BID ID -3470629)

Shree Builders (BID ID -3472949)

ARTI CONSTRUCTION (BID ID -3473356)

Haritwal traders (BID ID -3473216)

Gayatri Construction Co (BID ID -3473779)