Supply Installation Testing & Commissioning and Renovation of necessary for Electrical Work at GIDC New Colony Staff Quarters necessary Electrical work at GIDC Ankleshwar.

NAME OF WORK: Supply Installation Testing & Commissioning and Renovation of necessary

for Electrical Work at GIDC New Colony Staff Quarters necessary Electrical

work at GIDC Ankleshwar.

( VOLUME – III ) PRICE BID

ONLINE TENDER PAPERS

1 Estimated cost : Rs.

2 Tender fee (Rs. 900 Basic+ 18 % GST 162) : Rs.

4 Last date on (or before) which the tender along-with : From 17th August 2026 to

DD / FDR for Tender fees & EMD (by scanning) and 30th September 2026 up

other required documents must upload on the web site to 17.00 hours

of www.nprocure.com

5 Date on (or before) which DD/FDR in original for : From 01st October

Tender fee & EMD and other required documents must to 06th October 2026 up

reach in the office of the EXECUTIVE ENGINEER (M&E) to 17.00 hours (Only

2nd FLOOR, NARMADA COMMERCIAL COMPLEX, Working Days)

ABOVE CENTRAL BANK, M.G.ROAD, PANCH BATTI,

02642 – 241902 ) E-Mail:- xenme-

[email protected]

6 Eligible class of Registered : Bidder should be as per

Prequalification criteria for

Work- (2.1) Eligibility and

Having similar Experience

EXECUTIVE ENGINEER (M&E)

2nd FLOOR, NARMADA COMMERCIAL COMPLEX,

ABOVE CENTRAL BANK, M.G.ROAD, PANCH BATTI, GIDC, BHARUCH.

E-Mail:- [email protected]

Signature of Contractor Executive Engineer (M&E)

Name of Work: Supply Installation Testing & Commissioning and Renovation of necessary for

Electrical Work at GIDC New Colony Staff Quarters necessary Electrical work at

GIDC Ankleshwar.

Sr. Description Qty Unit Rate(Rs) Amount(Rs)

1 Point wiring for Light / Fan/ Bell/ 288 Pt. 336.00

Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both

are of ISI marked 1.1 kv grade FRLS

PVC insulated multi strand copper wires

upto max length of 10 mt, in below type

of pipe erected with 6A Tissino Type ISI

marked flush type switch / bell push and

accessories erected on Metal /

PVC/Wooden Box covered with 3 mm

thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed. ( h) with oval

conduit /PVC casing capping double lock

type erected concealed in wall/ceiling

2 Point wiring for FAN with 2-1.5 sq.mm & 72 Pt. 596.00

earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires

up to 10 mtr length, in below type of

pipe erected with 6A Modular type

switch and hum free EME step type

electronic fan regulator mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.(c)

with oval conduit /PVC casing capping

double lock type erected flushed on

wall/ceiling complete

3 Point wiring for Looped Plug with 6A 216 Pt. 258.00

Modular type switch & 5 pin socket

erected on PVC / Metallic box, single

mounting base frame covered with

textured / metallic front plate modules

erected on / in wall / ceiling with

Signature of Contractor Executive Engineer (M&E)

following type accessories

4 Supplying & erecting UPVC Mini 4320 Rmt. 31.00

trunking (PVC Casing-n-Capping) having

double-locking arrangement with

grooves, trunking of size not below

mm in height as per IS with accessories

of PVC/Resin polypropylene not below

1.8 mm thick duly sealed in joint &

erected on wall / ceiling of following size

5 Mains with 1.1 KV grade FRLS PVC 7080 Rmt. 57.00

insulated ISI marked stranded Copper

conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity

of following size with oval conduit /pvc

casing capping double lock type 2 wire

6 do - but with oval conduit /pvc casing 2980 Rmt. 83.00

capping double lock type 2 wire 2.5 sq.

7 Providing following type of Modular 72 No. 1356.00

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

(1)One No. SP 6 Amp. total nos 5 Cat.III

(10) 6/16Amp. Universal socket nos

(5) Electronic hum Free steps EME Fan

regulator nos 1 Cat.III

8 Providing following type of Modular 72 No. 381.00

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

(9) 16 Amp. SP one way switch Nos

(10) 6/16Amp. Universal socket Nos

Signature of Contractor Executive Engineer (M&E)

9 Providing following type of Modular 24 No. 1054.00

Type Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

(1)One No. SP 6 Amp. total nos 3 Cat.III

(10) 6/16Amp. Universal socket nos3

10 -do-(1)One No. SP 6 Amp. Nos 3 24 No. 455.00

11 -do-(1)One No. SP 6 Amp. 50 No. 152.00

12 -do(11) 6 Amps. Bell Push 24 No. 152.00

13 Approved make ELCBs / RCCBs 28 No. 1970.00

conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable

for operation on single phase 240 V.

having characteristic of quick action &

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps.DP

14 providing and erecting Miniature circuit 72 No. 112.00

breaker single pole 6A to 25A suitable to

240 V A.C. system and having breaking

capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with

ISI Mark Cat.III

15 Providing and erecting Sheet Steel 25 Ea. 583.00

powder coated MCB distribution board -

flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs

should be used of same company of MCB

suitable for (a) single door (IP-30) (ii)6

16 Supplying & erecting earth pit of 4 Ea. 5760.00

minimum bore dia.150mm size

approved make Earthing Electrode

Signature of Contractor Executive Engineer (M&E)

consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising,

connection terminal dia of 12mm with

constant ohmic value surrounded by

highly conductive compound with high

charge dissipation suitable for following

type of applications with chamber and

heavy duty cover. (A)(approved make

OEM has to submit test certificate

including value of earth resistance of

installation duly stamped and signed by

agency and officer Incharge has to

ensure the value of earthing resistane

mentioned in test Certificate) & having

back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar

content:-<2%(C) Back fill Compound :-

Earthing compound should be capable to

retain moisture for long time Necessary

test report must be submitted by

Agency.(b)For Electrical installation up

to 11 KV in normal soil.

Length of Pipe : 2.00 mtrsBack filling

Compound :1 no. Bag of 25 Kg.

17 Supplying & erecting XLPE(IS:7098)(I)- 776 Rmt. 137.00

88 ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of

following size. (E) 3 core 2.5 Sq. mm

18 LED INDOOR LIGHT 72 No. 374.00

FIXTURES:Supplying and erecting LED

Indoor fittings with (1) LED Luminary

should be as per below [A, B & C] with,

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with

housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS: 513/CRCA polyester powder coated

and high U.V. & corrosion resistance

with diffuser and/or Polycarbonate

optics with company mark/name 160 to

270 V,Power Factor more than 0.9, THD

Signature of Contractor Executive Engineer (M&E)

Uniformity ratio >0.7,Luminaries

efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %(Each fitting required

LM-79 & LM-80 Certificates)CREE /

OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux(U.S.A.) make LED

used for luminaire. SITC for (A) Tube

Light with integral / non-integral driver

(III) 22 -24 Watts, Surge-2KV, IP-20,

feet, Cat-III(Make: BAJAJ / PHILLIPS /

OREVA / CG / SYSKA / HELONIX)

19 do - but LED Lamps integral type,cool 288 No. 70.00

white with PC diffuser suitable for B22

LAMP holder (a) 2 to 3 watts (Make:

BAJAJ / PHILLIPS / WIPRO / CG / SYSKA

20 Providing and erecting Approved make 48 No. 1597.00

Ceiling fan with double ball bearing ISI

mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy

and 30 cms. down rod erected on

existing hook or clamp with 24/0.2 ,

core flexible wire with earthing. . [Make

shall be approved by Engineer in charge]

21 Supplying and erecting 19 / 20 mm. 48 No. 108.00

nominal bore Medium Class M.S. Pipe

down rod erected duly painted for fan

complete with necessary 24/ O.20,

core flexible wire with earthing.

22 Supplying & erecting Fan Hook of 10 mm 48 No. 43.00

M.S. Round bar grouted in RCC slab with

Making the site as original.

23 Supplying & erecting fan hook box of 10 48 No. 108.00

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary

24 Supplying and erecting LED street light / 8 No. 4997.00

Flood light fittings with High power

White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum

housing with smooth finish powder

coated and heat sink extruded

Signature of Contractor Executive Engineer (M&E)

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency >

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must

have 440VAC line supply with over-

voltage protection.(ii) above 48 to

I / We agree to carry out the work at ______________________ % above the estimated tender rates

___________________________________________ should be written in figures and words.

I / We agree to carry out the work at ______________________ % below the estimated tender rates

___________________________________________ should be written in figures and words.

ESTIMATED AMOUNT ESTIMATED AMOUNT

Put to tender Rs. 1536059.00 Put to tender Rs.

Rupees in words: ___________ Rupees in words: _________________

1. (*) Please strike out whichever is not applicable. All work shall be carried out as per the

specifications of the GIDC or as directed.

2. All the columns in Schedule should be filled in ink and the total entries in the last column

should be struck by the contractor under his signature.

3. Rate quoted included clearance of site (prior to commencement of work & at, its close) in all

respect & hold good for the work under all conditions, site moisture, weather etc.

Signature of Contractor Executive Engineer (M&E)

4. I/We have read the tender/general specifications/ conditions and I/We agree to follow

same and binding to me/us.

Bidders Signature Executive Engineer (M&E),

Signature of Contractor Executive Engineer (M&E)